Green Materials, Processing & Characterization
ICoGMPaC 2025
Eds. Adarsh Kumar Pandey, Saidur Rahman, Kalidasan Balasubramanian, Norulsamani binti Abdullah
Materials Research Proceedings Volume 68
Publication Date 2026, 346 pages
print ISBN 978-1-64490-422-0 (release date August 2026)
ePDF ISBN 978-1-64490-423-7
DOI: https://doi.org/10.21741/9781644904237
The conference proceedings present recent advances in the field of environmentally friendly green materials. The topics covered include advanced manufacturing and processing technologies, material characterization approaches, sustainable engineering practices, and emerging applications in materials science and engineering.
Table of Contents
Effect of Binder Type on Properties and Remazol Red Adsorption of Porous Activated Carbon Macroballoons
Nurul Izzati MUHAMAD ZAKIR, Zunaida ZAKARIA, Hakimah OSMAN, Abdulhakim MASA
Effect of Stirring Temperature and Blend Ratio on Flexural and Water Absorption of Toughened PVC/PCL Blends
Zulaikha DAMSAR, Sharifah Shahnaz SYED BAKAR, Muhammad Salihin ZAKARIA
Phase, Structure and Compressive Strength of Sintered Perlis Dolomite/Silica
Nur Hasnidah AHMAD SHUKERI, Syed Nuzul Fadzli SYED ADAM, Firuz ZAINUDDIN, Hasmaliza MOHAMAD, Heah CHENG YONG
Study of White Chicken Egg (Lysozyme) for Properties Study- A Preliminary Research
Nurul Sofia MOHD DALI, Siti Amira OTHMAN
Evaluation of Palm Oil-Based UV Curable Coatings for Termite Resistance in Rubber Wood
Rida TAJAU, Mohd Sofian ALIAS, Mohd Hamzah HARUN, Nurul Huda MUDRI, Farah Fadzehah HILIMI, Naurah MAT ISA, Khairul Azhar ABDUL HALIM, Sharilla MUHAMMAD FAISAL, Rosley CHE ISMAIL, Abdul Muizz MOHD SANI, Khairul Anwar MUSTAFA
Extraction of Silica from Burnt Rice Husk Using the Double Crucible Method
Faizul CHE PA, Ruhiyuddin MOHD ZAKI, Sasitra SEGAR
Ground Coffee Waste-Derived Activated Carbon for Aqueous Dye Adsorption
Teerunishan SUBRAMANIAM, Norsuria MAHMED, Muhammad Salihin ZAKARIA, Haiza HAROON
Performance of Graphene-Reinforced Concrete Compared to Normal Concrete Under Explosive Loading
I.S. ISMAIL, A.H. HILMI, A.R.A HAMID, S.M. Sk ABD RAZAK, N.A. MOHD SALEH
Effect of Polyethylene Glycol and Lemongrass Essential Oil as Plasticizers on the Properties of Chitosan/Hydroxyethyl Cellulose Blend Films
Nurul Izzaty MOHD ISA, Muthmirah IBRAHIM, Siti Salmi SAMSUDIN, Jalilah ABD JALIL
Effect of Calcination Holding Time, Mixing Time, and Filler Content on the Mechanical Performance of Dolomite Filled UHMWPE Composites
MD SALEH Siti Shuhadah, ZAINUDDIN Anis Maisarah, MOHAMMAD Nur Farahiyah, ISMAIL Anis Nadhirah, SYED MAHAMUD Syarifah Nuraqmar, OMAR Mohd Firdaus, MD AKIL Hazizan, CHANG Boon Peng, HAFSAT Ronke Saliu
Advancements in Materials Science: AI-Powered Predictions of Mechanical Behaviours in Natural Fiber Polymer Composites
Mohammed MOHAMMED, Jawad K. OLEIWI, Aeshah M. MOHAMMED, Azlin F. OSMAN, Tijjani ADAM, Bashir O. BETAR, Subash C. B. GOPINATH, Kuzmin ANTON
Degradation of Plastic Waste in Surabaya River, Indonesia
Atik WIDIYANTI, Eddy Setiadi SOEDJONO, Maya SHOVITRI, Adhi YUNIARTO
Enhancing Lower Limb Prosthetic Sockets with Hybrid Natural Fiber Composites: A Performance Analysis
Adel M. BASH, Jawad K. OLEIWI, Tahseen T. OTHMAN
Physicochemical Characteristics of EPOLA/PEGDA as a 3D Scaffold for Tissue Engineering Application
SITI NURUL SYAFIKA Sheikh Ibrahim, MAT UZIR Wahit, MARINA Talib, NORHAYANI Othman, FARAH FADZEHAH Hilmi
Optimization of EPOLA/PEGDA Formulation for 3D Scaffold Development using Design of Experiment (DOE – Mixture)
SITI NURUL SYAFIKA Sheikh Ibrahim, MAT UZIR Wahit, MARINA Talib, NORHAYANI Othman, FARAH FADZEHAH Hilmi
Exploring the Impact of Carbon Fiber Incorporation on the Mechanical Properties of PLA Composites
Yusrina MAT DAUD, Hazwani ZAIDOL, Mohammad Firdaus ABU HASHIM, Luqman MUSA, Mohamad Syahmie MOHAMAD RASIDI, Ahmad Azrem AZMI, Lokman Hakim IBRAHIM, Muhammad Al Fatih HENDRAWAN, Kholqillah Ardhian ILMAN, Agus Dwi ANGGONO, Bambang Waluyo FEBRIANTOKO
The Effect of Kernel Shell Oil Palm Empty Fruit Bunches (KS-OPEFB) and Rice Husks (RH) Hybrid Fillers on Thermoplastic Starch Films
Sinar Arzuria ADNAN, Azlin Fazlina OSMAN, Nur Hidayah AHMAD ZAIDI1, Muhammad Hanis ROSLI, Yahmunaa JAVERSEETHARAMAN, Ameirul Qayyum Eiman RAMLI, Haiza HAROON, Syazwani MAHMAD PUZI, Sharifah Hanis Yasmin SAYID ABDULLAH
Acid and Alkali Treatment on Natural Fibers for Better Tensile Strength of Epoxy Composites
Nor Azwin AHAD, Rama Murthi A/L Sooria MOORTHI
Effect of Curing Time and Moisture Exposure on the Mechanical Response of Polyurethane with Varying Polyol-to-Isocyanate Ratios
Ahmad Syafiq Iskandar AHMAD NAZRI, Diana CHE LAT, Ab Aziz MOHD YUSOF, Ismacahyadi Bagus MOHAMED JAIS, Doris Asmani MAT YUSOF, Mohamed Azizi MD ALI, Roslizayati RAZALI
Characterisation of Moisture Retention Properties in Commercial Hydrogel Dressings for Sustained Wound Hydration
Diviya Devi PARAMASIVAM, Raimi DEWAN, Nadia ADRUS, Kok Yeow YOU, Faishal Adilah SURYANATA
Study on the Process of Culantro Teabag (Eryngium foetidum)
Nguyen THI HIEN, Nguyen KIM PHUNG
Strength and Carbonation of Sand Cement Brick Containing Fly Ash as Partial Cement Replacement Under CO2 Curing
Faisal Sheikh KHALID, Ming Quan CHONG, Syazwi Hakimi SAAIDIN, Connie Hui Jun KONG, Syafiqa AYOB, Zahir ZAKI, Raden Mohd Farhan Helmy RADEN ISMAIL
Mechanical Performance of POFA-Modified Mortar Under Varying Curing Regimes
Nurul Hana MOHAMAD ZAINI, Nuril Izzeaty ISHAK, Mohamad Nidzam RAHMAT
The Synthesis of Graphitic Carbon from Coconut Shell Waste by Catalytic Graphitization
Yap Yee WEN, Norsuria MAHMED, Midhat Nabil AHMAD SALIMI, Azlin Fazlina OSMAN, Kamrosni ABDUL RAZAK, Shayfull Zamree ABD RAHIM, Mohd Yusry MOHAMAD YUNUS
Biogas Potential from the Investigation of Paddy Straw Co-Digestion with Cow Dung
T.Y.T. ROSLINA, M. MARIAM, A.R. NOR’ AINI, M.S.M. FAIZ, C.M. HASFALINA
Performance of Thermosiphon Effect Using Different Flat Plate Collector of Solar Water Heater
M.M. NORUL AHSANAH AULIA, A. MARIAH, H. NURAMIDAH, D.S. ZALEHA, M.Y. FATIMAH, A.R.M. ASHRAF, M.M. KAMARUZAMAN, A. FARIDAHANIM
Transformation of Cellulose Allomorph of Musa acuminata balbisiana Peel Using Ethylenediamine
A.H. JASNI, A.S. AZMI, N.I. MOHAMAD PUAD, F. ALI, Y. AHMAD NOR
Experimental Study on the Viscosity Properties of Modified Vegetable Oil with Hybrid hBN/TiO2 Nanoparticles as Metalworking Fluid
A. M. SABRI, N. TALIB, H. ABDULLAH, A. S. A. SANI, S. KUNAR
pH Dependent Growth of ZnO Seed Template in Alkaline Solution
M. MARINA, M.Z.M. ZAMZURI, N.H. ABDUL HALIM, R.N. AHMAD, Z. NOORAIZEDFIZA, S.S. AHMAD, N. NISHA RAZALLI, Z. IBERAHIM
Neck Formation Properties of SS316L Particle Powder Against Time in Conventional Sintering Process
M.R. MAZLAN, M.A.M. YUSOFF, N.H. JAMADON
Effect of Air Abrasion Surface Treatment on the Bonding Behavior at Zirconia-Resin Interface
N.S. AMINUDDIN, M.F.A. RAHIM, N.H. JAMADON
Oxidation Behavior of Aluminium Granules and Aluminium Alloy Chips During In-Situ Casting
Ain Zubaidah Binti SAMIAN, Aslinda Binti SALEH
The Potential of Autonomous Self-Healing Microcapsules for Concrete Cracking
N.M. ZAHARI, Z. ITAM, A. SYAMSIR, M.H. ZAWAWI, S.M.M.S.A. FADZIL, M.M. ZAINOODIN, Z.A.A. HAMID, N.A.M. AZMAN
Influence of Fusion Welding Processes on Microstructure and Mechanical Properties of Dissimilar Metal (AISI 304 SS-Copper) Weldment
Bikash Ranjan MOHARANA, Aezeden MOHAMED, Sushant Kumar SAHU, Susanta Kumar SAHOO, Dillip Kumar BISWAL, Tapas Kumar MOHARANA, Kamalakanta MUDULI
Flow Analysis of Eco-Friendly Geopolymer with Recycled Copper for Rapid Tooling Applications
Sharifah SALSABILA, Z. SHAYFULL, S.M. NASIR, Leong Kean WEI, M. FATHULLAH
The Tensile Properties and Microstructural Characteristics of Pulverised Silica-Coated Kenaf–Epoxy Composites
M.J. MEELAD, N.Z. NORIMAN, M.A. AZIZAN, M.F. OMAR, A.Z. ROMLI, R. HAMZAH, N. ISHAK, S.T. SAM
Flexural Properties and Bulk Density in Silica Coated Kenaf/Epoxy Composites
M.J. MEELAD, N.Z. NORIMAN, M.A. AZIZAN, M.F. OMAR, A.Z. ROMLI, R. HAMZAH, N. ISHAK, OMAR S. DAHHAM
Mechanical and Durability Performance of Fiberglass-Reinforced Concrete for Water Retaining Structures
M.A. AZIZAN, N.Z. NORIMAN, N. ISHAK, R. HAMZAH, S.T. SAM, OMAR S. DAHHAM
Synthesis Characterization of Slow-Release Pesticide with Epoxidized Natural Rubber and Cassava Tree Trunk
Y. HARI KRISHNAN, R. HAMZAH, N.Z. NORIMAN, M. A. AZIZAN
Design, Finite Element Analysis and Fabrication of a Laboratory Scale Biomass Pelletizer
R. I. Ismail, C. Y. Khor, A. R. Mohamed, M. N. S. Zaimi, M. R. Jamalludin, L. Y. Lee, N. L. Makhtar, N. Abdul Razak, W. N. A. Wan Draman
Surface Performance Evaluation of Lattice Structure Produce by Fused Deposition Modeling Machine Using Design of Experiment (DOE)
N.A.M. RAZIP, M.A. ISMAIL, S. SHAHARUDDIN, M. JOHAR, Z. MOHAMMAD, M.S.E. KOSNAN
Using the Taguchi Approach for Investigating Mechanical Properties of Recycled Carbon Black Reinforced Acrylonitrile Butadiene Styrene (ABS) and Polylactic Acid (PLA) for Injection Moulding Applications
A.E. KASIM, N.A. SHUAIB, C.C. FOOI, C.R. QUAN, M.H.J.A. HADI, U.F. M. ALI, A.F. OSMAN
Monitoring and Prediction of Tool Wear in Turning Process using Machine Learning Technique
S.Y. QUEK, W.K. LEE, N. TALIB, H. ABDULLAH, A.M SABRI, A. SUNG
Mechanical Characterization of Solder/Intermetallic Compound (IMC) Interface: The Role of Temperature and Strain Rate
S. F. M. ASASAARI, M. N. TAMIN, M. A. ISMAIL, S. SHAHARUDDIN, M. AZMI, M. JOHAR, Z. MOHAMMAD, M. S. E. KOSNAN, K. J. WONG
