Effect of Calcination Holding Time, Mixing Time, and Filler Content on the Mechanical Performance of Dolomite Filled UHMWPE Composites

Effect of Calcination Holding Time, Mixing Time, and Filler Content on the Mechanical Performance of Dolomite Filled UHMWPE Composites

MD SALEH Siti Shuhadah, ZAINUDDIN Anis Maisarah, MOHAMMAD Nur Farahiyah, ISMAIL Anis Nadhirah, SYED MAHAMUD Syarifah Nuraqmar, OMAR Mohd Firdaus, MD AKIL Hazizan, CHANG Boon Peng, HAFSAT Ronke Saliu

Abstract. Ultra-High Molecular Weight Polyethylene (UHMWPE) is a high-performance polymer known for its remarkable wear resistance and strength, making it suitable for demanding industrial and biomedical applications. This study evaluates the potential of thermally treated dolomite as a reinforcing filler to enhance the mechanical properties of UHMWPE composites. The optimization of processing parameter: calcination holding time, mixing time, and filler content was carried out using Response Surface Methodology (RSM) with a Box Behnken Design. Fifteen experimental runs were conducted to evaluate the tensile strength and hardness of the composites. Analysis of Variance (ANOVA) was used to develop regression models and assess the significance of the processing variables. The optimum conditions were 4 hours of calcination holding time, 60 minutes of mixing time, and 5 wt.% dolomite filler. Under these conditions, the composite achieved a tensile strength of 27.49 MPa and hardness of 50.33 Shore-D. The tensile model exhibited an R² of 68.13% with an F-value of 1.19, while the hardness model achieved an R² of 97.90% with an F-value of 25.91. These finding demonstrate that calcination-treated dolomite effectively reinforcement for UHMWPE composites, highlighting its potential as a sustainable reinforcement for advanced engineering applications. The novelty of this work lies in the incorporation of calcination-treated dolomite as a sustainable reinforcing filler for UHMWPE and the systematic optimisation of its processing parameters using a Box Behnken based RSM approach, which has not been previously reported for this material system.

Keywords
UHMWPE, Dolomite, RSM, Polymer Composites

Published online 7/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: MD SALEH Siti Shuhadah, ZAINUDDIN Anis Maisarah, MOHAMMAD Nur Farahiyah, ISMAIL Anis Nadhirah, SYED MAHAMUD Syarifah Nuraqmar, OMAR Mohd Firdaus, MD AKIL Hazizan, CHANG Boon Peng, HAFSAT Ronke Saliu, Effect of Calcination Holding Time, Mixing Time, and Filler Content on the Mechanical Performance of Dolomite Filled UHMWPE Composites, Materials Research Proceedings, Vol. 68, pp 73-80, 2026

DOI: https://doi.org/10.21741/9781644904237-10

The article was published as article 10 of the book Green Materials, Processing & Characterization

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1]1 Kurtz, S. M. UHMWPE Biomaterials Handbook: Ultra High Molecular Weight Polyethylene in Total Joint Replacement and Medical Devices: Third Edition, 2015.
[2] Zhang, H., Shin, Y., Lee, D., & Yoon, K.-B. Preparation of ultra-high molecular weight polyethylene with MgCl2/TiCl4 catalyst: effect of internal and external donor on molecular weight and molecular weight distribution. Polymer Bulletin, 66(5), 627–635, 2011. https://doi.org/10.1007/s00289-010-0299-5
[3] Gürgen, S. Low-velocity impact performance of UHMWPE composites consolidated with carbide particles. Archives of Civil and Mechanical Engineering, 20, 38, 2020. https://doi.org/10.1007/s43452-020-00042-0
[4] Patil, N. A., Njuguna, J., & Kandasubramanian, B. UHMWPE for biomedical applications: Performance and functionalization. European Polymer Journal, 125, 109529, 2020. https://doi.org/https://doi.org/10.1016/j.eurpolymj.2020.109529
[5] S.K. Venkatraman, K. Zhang, Review on calcium- and magnesium-based silicates for bone regeneration, J. Biomed. Mater. Res. A 108 (2020) 2012–2035. https://doi.org/10.1002/jbm.a.36925
[6] J. Wu, H. Zhang, L. Zhou, J. Ma, Y. Tang, The development of a magnesium-releasing and long-term mechanical stability calcium phosphate bone cement, Front. Bioeng. Biotechnol. 9 (2022) 803723. https://doi.org/10.3389/fbioe.2021.803723
[7] S.F.A. Abdullah, S.S. Saleh, N.F. Mohammad, S.N. Mahamud, M. Omar, H. Md Akil, B.P. Chang, H.R. Saliu, N.H. Rostam, J. Gondro, Effect of nitrate acid treated dolomite on the tensile properties of ultra-high molecular weight polyethylene (UHMWPE) composites, Arch. Metall. Mater. 69 (2024) 281–288. https://doi.org/10.24425/amm.2024.147820
[8] S.K. Venkatraman, K. Zhang, Review on calcium- and magnesium-based silicates for bone regeneration, J. Biomed. Mater. Res. A 108 (2020) 2012–2035. https://doi.org/10.1002/jbm.a.36925
[9] D.C. Montgomery, Design and Analysis of Experiments, 10th ed., Wiley, New York, 2020.
R.H. Myers, D.C. Montgomery, C.M. Anderson-Cook, Response Surface Methodology: Process and Product Optimization Using Designed Experiments, 4th ed., Wiley, Hoboken, 2016.
[10] S. Antony, Design of Experiments for Engineers and Scientists, Butterworth-Heinemann, Oxford, 2014.
[11] A. Jebur, M. Mohamed, N. Yusoff, Effect of calcination temperature on the physical and mechanical properties of dolomite-filled composites, J. Mater. Res. Technol. 29 (2024) 1234–1245. https://doi.org/10.xxxxxx
[12] J. Jensen, Influence of filler loading and dispersion on mechanical properties of polymer composites, Compos. Part B Eng. 115 (2017) 152–160. https://doi.org/10.1016/j.compositesb.2017.01.043
[13] D. C. Montgomery, G.C. Runger, Applied Statistics and Probability for Engineers, 8th ed., Wiley, New York, 2022.
[14] M. Din, N. Ahmad, M. Yahaya, Optimization of process parameters on the mechanical properties of polymer composites using RSM, Mater. Today Proc. 5 (2018) 18716–18723. https://doi.org/10.1016/j.matpr.2018.06.039
[15] V. A. Yiga, M. Lubwama, D. Karemani, D. Bbosa, “Prediction of tensile strength of biochar filled polylactic acid composites via Box-Behnken design,” J. Eng. Res. (2023). https://doi.org/10.1016/j.jer.2023.100142
[16] M. Ramesh, K. Palanikumar, K. Hemachandra Reddy, Mechanical property evaluation of sisal–jute–glass fiber reinforced polyester composites, Compos. Part B Eng. 48 (2013) 1–9. https://doi.org/10.1016/j.compositesb.2012.12.004
[17] N. Sathiya Narayanan, D. Sai Venkat Mohan, J. Abhinay, T. Dinesh, V. Satya Sai Surya Teja, R. Praneeth, Effects on microhardness, tensile strength, deflection, and drop weight impact resistance with the addition of hybrid filler materials for enhancing GFRP composites, Sci. Rep. 14 (2024) 27524. https://doi.org/10.1038/s41598-024-76094-6
[18] J. Saadie, S. Mechi, A. Hassan, Enhancing mechanical and physical properties of epoxy composites with eco-friendly metakaolin filler: An experimental study, Rev. Compos. Mater. Avancés 34 (2024) 87–94. https://doi.org/10.18280/rcma.340111
[19] V.A. Yiga, M. Lubwama, A.R. Okello, D.S. Mutyaba, A. Kiggundu, J.M. Kasedde, Optimization of tensile strength of PLA/clay/rice husk composites using Box–Behnken design, Biomass Convers. Biorefin. 13 (2023) 11245–11257. https://doi.org/10.1007/s13399-021-01971-3