Enhancing Lower Limb Prosthetic Sockets with Hybrid Natural Fiber Composites: A Performance Analysis
Adel M. BASH, Jawad K. OLEIWI, Tahseen T. OTHMAN
Abstract. In material science, researchers are exploring natural fibers and their composites. this study investigates eco-friendly ramie and bamboo fibers, aiming to develop prosthetic sockets using these sustainable materials as alternatives to traditional manufacturing resources. There were six vacuum-molded laminated composites manufactured. In various layers, Ramie, bamboo, Perlon, glass, and carbon fibers reinforce the polymethyl methacrylate (PMMA) matrix. The first laminate group consists of ramie, carbon, and glass fibres (2 ramie + 2 glass or 2 carbon + 2 ramie). The second laminate group comprises bamboo, carbon, and glass fibres (2 bamboo + 2 glass or 2 carbon + 2 bamboo) layers. Experimental and numerical estimations were utilized to determine the effect of various fiber lamination sequences on the volumetric and mechanical properties. The results indicated that lamination (2 ramie fiber + 2 carbon + 2 ramie fiber) has the highest values of tensile strengths and moduli of elasticity at 272MPa and 4189 MPa, respectively. In contrast, lamination (2 bamboo +2Glass + 2 bamboo) has the lowest value of tensile strengths and moduli of elasticity at 89MPa and 2672MPa., respectively. The lowest value of tensile strengths and moduli of elasticity are at 38MPa and 1727MPa, respectively. The socket models were analyzed using the ANSYS finite element method. The numerical analysis revealed that the lamination using bamboo fiber reinforcement had the greatest overall deformation, measuring 7.11 mm and an equivalent elastic strain of 0.0162. Nevertheless, it is worth noting that the least numerical safety factor exhibited the lowest value of 1.613.
Keywords
Natural Fibers, A Knee, Lower Limb Socket, Stress Analysis, Finite Element Method
Published online 7/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Adel M. BASH, Jawad K. OLEIWI, Tahseen T. OTHMAN, Enhancing Lower Limb Prosthetic Sockets with Hybrid Natural Fiber Composites: A Performance Analysis, Materials Research Proceedings, Vol. 68, pp 97-104, 2026
DOI: https://doi.org/10.21741/9781644904237-13
The article was published as article 13 of the book Green Materials, Processing & Characterization
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] M. J. Jweeg, Z. S. Hammoudi, and B. A Alwan, Optimised Analysis, Design, and Fabrication of Trans-Tibial Prosthetic Sockets, IOP Conf. Ser. Mater. Sci. Eng. 433 (2018) 012058. https://doi.org/10.1088/1757-899X/433/1/012058
[2] A. M. Bash, J. K. Oleiwi, and T. T. Othman, A Review of some Characteristics of a Composite Hybrid Socket for Prosthetics Derived from Plant Fibers. Key Eng. Mater. 937 (2022) 99-106. https://doi.org/10.4028/p-1554f7
[3] J. K. Oleiwi, Q. A. Hamad, and S. A. Abdulrahman, Flexural, impact and max. shear stress properties of fibers composite for prosthetic socket, Mater. Today: Proc. 56 (2022) 3121-3128. https://doi.org/10.1016/j.matpr.2021.12.368
[4] N. K. Faheed, J. K. Oleiwi, and Q. A. Hamad, Effect of different fiber reinforcements on some properties of prosthetic socket, Eng. Technol. J. 39 (2021) 1715-1726. https://doi.org/10.30684/etj.v39i11.2267
[5] H. R. Wasmi, J. S. Chiad, and A. A. Hamzah, Experimental study for materials prosthetic above knee socket under tensile or fatigue stress with varying temperatures effect, J. Eng. 20 (2014) 87-95. https://doi.org/10.31026/j.eng.2014.03.08
[6] H. Jena, M. K. Pandit, and A. K. Pradhan, Study the impact property of laminated bamboo-fibre composite filled with cenosphere, Int. J. Environ. Sci. Dev. 3 (2012) 456. https://doi.org/10.7763/IJESD.2012.V3.266
[7] N. K. Faheed, Q. A. Hamad, and J. K. Oleiwi, Enhancement of the flexural and impact properties laminated biocomposite by new natural fibres for artificial lower limb socket, Adv. Mater. Process. Technol. 8(4) (2022) 4347-4364. https://doi.org/10.1080/2374068X.2022.2073052
[8] M. B. Hunain, B. A. Abass, and J. M. Akhudair, Experimental and numerical studies of fatigue properties of carbon/glass fiber/epoxy hybrid composites enhanced with nano TiO2 powder, Diagnostyka, 22 (2021). https://doi.org/10.29354/diag/135146
[9] N. K. Faheed, Q. A. Hamad, and J. K. Oleiwi, Tensile and Stress Analysis of Hybrid Composite Prosthetic Socket Reinforced with Natural Fibers, J. Renew. Mater. 10(7) (2022) 1989. https://doi.org/10.32604/jrm.2022.017573
[10] H.A. Sharhan, Z.N. Rasheed, and J. K. Oleiwi, Effect of Polypropylene (PP) and Polyacrylonitrile (PAN) Fibers Reinforced Acrylic Resin on Compression, Hardness and Surface-Roughness for Denture Applications, Key Eng. Mater. 911 (2022) 9-16. https://doi.org/10.4028/p-197rys
[11] H.A. Sharhan, Z.N. Rasheed, and J.K. Oleiwi, Synthesis and Physical Characterization of PMMA/PP and PMMA/PAN Composites for Denture Applications J. Appl. Sci. Nanotechnol. (2021). https://doi.org/10.53293/jasn.2021.3759.1040
[12] J.K. Oleiwi, S.I. Salih, and H.S. Fadhil, Effect of Siwak and Bamboo Fibers on Tensile Properties of Self-Cure Acrylic Resin Used for Denture Applications, J. Mater. Sci. Eng. 06 (2017). https://doi.org/10.4172/2169-0022.1000370
[13] S.I. Salih, J.K. Oleiwi, and H.S. Fadhil, Preparation and Investigation of some Properties of Acrylic Resin Reinforced with Siwak Fiber Used for Denture Base Applications, Science 2 (2017) 309-314. https://doi.org/10.24017/science.2017.3.53

