The Synthesis of Graphitic Carbon from Coconut Shell Waste by Catalytic Graphitization
Yap Yee WEN, Norsuria MAHMED, Midhat Nabil AHMAD SALIMI, Azlin Fazlina OSMAN, Kamrosni ABDUL RAZAK, Shayfull Zamree ABD RAHIM, Mohd Yusry MOHAMAD YUNUS
Abstract. The graphitic carbon has been synthesized by catalytic graphitization process. There were three types of catalyst that have been used during the study, namely potassium hydroxide (KOH), ferric nitrate (Fe(NO3)3 and nickel chloride (NiCl2·6H2O) solutions. During the experiment, the coconut shell carbon (CSC) powder was impregnated in the catalyst solutions and stirred at 60°C until all the solution evaporated. The samples then were transferred into the crucible and graphitized at 1000°C in a muffle furnace for 3 hours of holding time. From the CHNS analysis, it was found that the KOH catalyst improved the carbon content of CSC from 84.8% to 86.5%. From the X-ray diffraction (XRD) and the Raman spectroscopy analysis, it was proved that by using 1M of KOH catalyst, the amorphous phase of CSC was transformed into a graphitic carbon. The field-emission scanning electron microscopy (FE-SEM) images of the CSC further support the findings as the KOH-CSC was approaching a layering structure. Therefore, it is suggested that KOH is feasible to transform the amorphous CSC into graphitic carbon/graphite structure.
Keywords
Graphitic Carbon, Catalytic Graphitization, Coconut Shell Waste
Published online 7/15/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Yap Yee WEN, Norsuria MAHMED, Midhat Nabil AHMAD SALIMI, Azlin Fazlina OSMAN, Kamrosni ABDUL RAZAK, Shayfull Zamree ABD RAHIM, Mohd Yusry MOHAMAD YUNUS, The Synthesis of Graphitic Carbon from Coconut Shell Waste by Catalytic Graphitization, Materials Research Proceedings, Vol. 68, pp 182-188, 2026
DOI: https://doi.org/10.21741/9781644904237-24
The article was published as article 24 of the book Green Materials, Processing & Characterization
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] L. Gai, J. Li, Q. Wang, R. Tian, K. Li, Evolution of biomass to porous graphite carbon by catalytic graphitization, J. Environ. Chem. Eng. 9 (2021) 106678. https://doi.org/10.1016/j.jece.2021.106678
[2] Z. Sun , D. Yao , C. Cao , Z. Zhang , L. Zhang , H. Zhu , Q. Yuan , B. Yi, Preparation and formati on mechanism of biomass-based graphite carbon catalyzed by iron nitrate under a low-temper ature condition, J. Environ. Manage 318 (2022) 1-28. https://doi.org/10.1016/j.jenvman.2022.115555
[3] N. Karić, A.S. Maia, A. Teodorović, N. Atanasova, G. Langergraber, G. Crini, A.R.L. Ribeiro, and M. Đoli, Bio-waste valorisation: Agricultural wastes as biosorbents for removal of (in)organic pollutants in wastewater treatment, Chem. Eng. J. Adv. 9 (2022) 100239. https://doi.org/10.1016/j.ceja.2021.100239
[4] J. Hoekstra, A.M. Beale, F. Soulimani, M. Versluijs-Helder, J.W. Geus, and L.W. Jennesken, Base Metal Catalyzed Graphitization of Cellulose: A Combined Raman Spectroscopy, Temperature-Dependent X-ray Diffraction and High-Resolution Transmission Electron Microscopy Study. J. Phys. Chem. C 119(19) (2015) 10653-10661. https://doi.org/10.1021/acs.jpcc.5b00477
[5] M. T. Safian, U. S. Haron, and M. N. Mohamad Ibrahim, A review on bio-based graphene derived from biomass wastes, BioRes. 15(4) (2020) 9756-9785. https://doi.org/10.15376/biores.15.4.Safian
[6] O. Adeoye, R. O. Quadri, and O. S. Lawal, Assessment of biofuel potential of tenera palm kernel shell via fixed bed pyrolysis and thermal characterization. Results Surf. Interfaces 9 (2022) 100091. https://doi.org/10.1016/j.rsurfi.2022.100091
[7] Tomczyk, Z. Sokołowska, and P. Boguta, Biochar Physicochemical Properties: Pyrolysis Temperature and Feedstock Kind Effects, Rev. Environ. Sci. Biotechnol. 19 (2020) 191-215. https://doi.org/10.1007/s11157-020-09523-3
[8] K. Macdermid-Watts, E. Adewakun, O. Norouzi, T.D. Abhi, R. Pradhan, and A. Dutta, Effects of FeCl3 Catalytic Hydrothermal Carbonization on Chemical Activation of Corn Wet Distillers’ Fiber, ACS Omega 6(23) (2021) 14875-14886. https://doi.org/10.1021/acsomega.1c00557
[9] S. Supriya, G. Sriram, Z. Ngaini, C. Kavitha, M. Kurkuri, I.P. De Padova, and G. Hegde, The Role of Temperature on Physical Chemical Properties of Green Synthesized Porous Carbon Nanoparticle Waste Biomass Valor. 11 (2020) 3821-3831. https://doi.org/10.1007/s12649-019-00675-0
[10] F. Destyorini, Y. Irmawati, A. Hardiansyah, H. Widodo, I. N. D. Yahya, N. Indayaningsih, R. Yudianti, Y. I. Hsu, H. Uyama, Formation of nanostructured graphitic carbon from coconut waste via low temperature catalytic graphitisation, Eng. Sci. Technol. Int. J. 24 (2021) 514 -523. https://doi.org/10.1016/j.jestch.2020.06.011
[11] F. Destyorini, R. Yudianti, Y. Irmawati, A. Hardiansyah, Y. I. Hsu, H. Uyama, Temperature driven structural transition in the nickel-based catalytic graphitization of coconut coir Diam Relat, Mater. 117 (2021) 108443. https://doi.org/10.1016/j.diamond.2021.108443
[12] J. Dennison, M. Holtz, and G. Swain, Raman Spectroscopy for carbon materials, Spectroscopy 11 (1996) 38-45.
[13] P.H. Guo, H.M. Cheng, J.S. Chen, Y.S. Wu, C.C. Yang, F.Y. Zeng, R.J. Chung, and P.T. Chen, IEEE Access (2021).
[14] H.L. Ip S O N, Proc. R. Soc. London. Ser. A. Math. Phys. Sci. 181, 101 (1942).
[15] T. Qiu, J.G. Yang,X. J. Bai and Y. L. Wang, The preparation of synthetic graphite materials with hierarchical pores from lignite by one-step impregnation and their characterization as dye absorbents. RSC Advances, 9(22) (2019) 12737-12746. https://doi.org/10.1039/C9RA00343F

