Performance of Thermosiphon Effect Using Different Flat Plate Collector of Solar Water Heater
M.M. NORUL AHSANAH AULIA, A. MARIAH, H. NURAMIDAH, D.S. ZALEHA, M.Y. FATIMAH, A.R.M. ASHRAF, M.M. KAMARUZAMAN, A. FARIDAHANIM
Abstract. Solar thermal energy has become one of the most sustainable and low-carbon technologies for empowering our future water heater systems. Nowadays, water heating is the second biggest portion of residential energy use after air conditioning systems. Previous researcher study a wide range of solar water heater designs have been suggested and produced within two methods whereas forced circulation using a mechanical pump and natural circulation without the use of a pump also known as thermosiphon solar water heater. This research was to analyse most efficient Flat Plate Collector (FPC) in terms of heat absorption on Thermosiphon Effect due to energy collection by different colour, material and glazing. This experiment uses Solar Energy Trainer to compare the impact of several forms FPC on heat absorption of thermosiphon effect in solar water heater. The most efficient FPC in terms of colour is black collector with higher efficiency of 9.3% compared to white while most efficient FPC in terms of material and glazing are copper and double glazing collector with 10.86% and 11.15% respectively. The experiment and analysis show that various types of FPC with good heat absorber have higher efficiency.
Keywords
Published online 7/15/2026, 9 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: M.M. NORUL AHSANAH AULIA, A. MARIAH, H. NURAMIDAH, D.S. ZALEHA, M.Y. FATIMAH, A.R.M. ASHRAF, M.M. KAMARUZAMAN, A. FARIDAHANIM, Performance of Thermosiphon Effect Using Different Flat Plate Collector of Solar Water Heater, Materials Research Proceedings, Vol. 68, pp 165-203, 2026
DOI: https://doi.org/10.21741/9781644904237-26
The article was published as article 26 of the book Green Materials, Processing & Characterization
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] S.Fereres, Solar Thermal Energy Systems. (2018). https://doi.org/10.2174/9781681087191118030003
[2] S. B. Amin and N. Nuarey Mithila, J. Electron. 1-47 (2017).
[3] T. S. Ge, R. Z. Wang, Z. Y. Xu, Q. W. Pan, S. Du, X. M. Chen, T. Ma, X. N. Wu, X. L. Sun and J. F Chen, Renew. Energy 126, 1126-1140 (2018). https://doi.org/10.1016/j.renene.2017.06.081
[4] B. Freegah and A. A. Al-Tabbakh, UPB Sci. Bull. Ser. D Mech. Eng. 81, 117-132 (2019).
[5] Y. Amirgaliyev, M. Kunelbayev, W. Wójcik, B. Amirgaliyev, A. Kalizhanova, O. Auelbekov, N. Kataev and A. Kozbakova, J. Ecol. Eng. 19, 176-181 (2018). https://doi.org/10.12911/22998993/91882
[6] W. T. Li, W. Tushar, C.Yuen, B. K. K.Ng, S. Tai and K. T. Chew, Energy Build, 224 (2020).
[7] T. Rajashekaraiah, M. J. Mura and G. S. Sharma, “Optimizing the Efficiency of Solar Flat Plate Collector with Trapezoidal Reflector” (AIP Publishing, 2019), p. 030008 https://doi.org/10.1063/1.5092911
[8] M. Feilizadeh, M. R. K. Estahbanati, M. Khorram and M. R. Rahimpour, Renew. Energy 143, 328-334 (2019). https://doi.org/10.1016/j.renene.2019.05.013
[9] B. K. Gond, S. Mittal, P. Prajapati and R. Khare, Analysis of Solar Flat Plate Collector 105-110 (2016).
[10] O. Touaba, M. S. Ait Cheikh, M. E. A. Slimani, A. Bouraiou, A. Ziane, A. Necaibia and A. Harmim, Sol. Energy 199, 630-644 (2020). https://doi.org/10.1016/j.solener.2020.02.064
[11] R. Alayi, N. Khalilpoor, S. Heshmati, A. Najafi and A. Issakhov, Int. J. Photoenergy (2021). https://doi.org/10.1155/2021/6838138
[12] A. Jamar, Z. A. A.Majid, W. H. Azmi, M. Norhafana and A. A. Razak, Int. Commun. Heat Mass Transf. 76,178-187 (2016). https://doi.org/10.1016/j.icheatmasstransfer.2016.05.028
[13] Y. M Liu, K. M. Chung, K. C. Chang and T. S. Lee, Energies 5, 3266-3278 (2012). https://doi.org/10.3390/en5093266
[14] A. Brew-Hammond and F. O. Akuffo, “A Review of Experimental Studies on Traditional Thermosiphon Solar Water Heater.Pdf,” (1989), p. 12.
[15] I. Michaelides, P. Eleftheriou, G. Roditis, P. Kyriacou and G. A. Siamas, “On the Night Heat Losses in Thermosyphon Solar Water Heaters,” (2016), pp. 1-7. https://doi.org/10.18086/eurosun.2010.16.22
[16] K. Murari and R. Chaurasiya, Renew. Sustain. Energy Rev., 67, 641-650 (2017). https://doi.org/10.1016/j.rser.2016.09.078
[17] R. Shukla, K. Sumathy, P. Erickson and J. Gong, Renew. Sustain. Energy Rev., 19, 173-190 (2013). https://doi.org/10.1016/j.rser.2012.10.048
[18] N. Ikmal, S. Azha, H. Hussin and M. S. Nasif, “Thermal Performance Enhancement in Flat Plate Solar Collector Solar Water Heater : A Review,” (2020), p. 14.
[19] S. Chowdhury and B. Salam, “Flat Plate Solar Collector Using Nanofluid” (2019).
[20] S. K. Verma, A. K. Tiwari and D. S. Chauhan, Energy Convers. Manag., 134, 103-115 (2017). https://doi.org/10.1016/j.enconman.2016.12.037
[21] B. A. Sup, “EFFECT OF ABSORBER PLATE MATERIAL ON FLAT PLATE COLLECTOR EFFICIENCY,” (2010).
[22] H. Dagdougui, A. Ouammi, M. Robba and R. Sacile, Renew. Sustain. Energy Rev., 15, 630-638 (2011). https://doi.org/10.1016/j.rser.2010.09.010
[23] D. G. Gunjo, P. Mahanta and P. S. Robi, Renew. Energy 106, 24-36 (2017). https://doi.org/10.1016/j.renene.2016.12.041
[24] R. M. B. Nurhanis, “THE COMPARISON OF PERFORMANCES BY USING COLOUR , MATERIAL AND GLAZING OF SOLAR FLAT PLATE COLLECTOR,” (2019), p. 140.
[25] M. M. Dhongadi, S. S. Sajjan, Turkish J. 12, 211-220 (2021).
[26] T. Zhang, Z. W. Yan, L. Y. Wang, W. J. Zheng and Y. H. Su, Sol. Energy 197, 433-442 (2020). https://doi.org/10.1016/j.solener.2020.01.019
[27] H. Vettrivel and P. Mathiazhagan, Int. J. Renew. Energy Res., 7, 267-274 (2017).

