Mechanical Characterization of Solder/Intermetallic Compound (IMC) Interface: The Role of Temperature and Strain Rate
S. F. M. ASASAARI, M. N. TAMIN, M. A. ISMAIL, S. SHAHARUDDIN, M. AZMI, M. JOHAR, Z. MOHAMMAD, M. S. E. KOSNAN, K. J. WONG
Abstract. This research paper comprehensively investigates the cohesive zone model (CZM) interface properties of SAC405 solder joints under solder shear push tests. The accurate extraction of interface properties is achieved using a computational-experimental approach. The study quantifies the temperature dependence of lead-free solder joints through analysis of load-displacement curves at various straining rates. Solder ball shear tests are conducted to assess the strength of SAC405 solder joints under dynamic loading conditions. Utilizing a 3D finite element model incorporating the Unified Inelastic Strain Constitutive Model and cohesive zone model, the research predicts damage initiation, propagation, and solder/intermetallic compound interface fracture during the solder shear push test. The CZM parameter values are analyzed as a function of temperature and strain rate, revealing a degradation trend as temperature increases from 25 °C to 220 °C. Furthermore, the study demonstrates that temperature changes influence the initiation and evolution of damage in SAC405 solder joints. The findings provide valuable insights into the behavior of SAC405 solder joints and contribute to developing more reliable microelectronic packages by accurately predicting solder interconnect failure.
Keywords
Mechanical Characterization, Solder Shear Push Test, Solder/Intermetallic Compound
Published online 7/15/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: S. F. M. ASASAARI, M. N. TAMIN, M. A. ISMAIL, S. SHAHARUDDIN, M. AZMI, M. JOHAR, Z. MOHAMMAD, M. S. E. KOSNAN, K. J. WONG, Mechanical Characterization of Solder/Intermetallic Compound (IMC) Interface: The Role of Temperature and Strain Rate, Materials Research Proceedings, Vol. 68, pp 328-334, 2026
DOI: https://doi.org/10.21741/9781644904237-44
The article was published as article 44 of the book Green Materials, Processing & Characterization
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1]M.B. Jeronimo, et al., Microelectron. Rel. 140, 114869 (2023). https://doi.org/10.1016/j.microrel.2022.114869
[2] S. Ghenam, et al., Microelectron. Rel. 146, 115019 (2023). https://doi.org/10.1016/j.microrel.2023.115019
[3] O.E. Gabriel and D.R. Huitink, J. Electron. Packag. 145, 020801 (2023). https://doi.org/10.1115/1.4055774
[4] J.A. Depiver, S. Mallik, and E.H. Amalu, J. Electron. Mater. 50, 263-282 (2021). https://doi.org/10.1007/s11664-020-08525-9
[5] X. Liu, Virginia Polytechnic Inst. State Univ., (2001).
[6] A. Yamin, Master Thesis, Universiti Teknologi Malaysia, Malaysia, (2012).
[7] G. Mirone, et al., Mater. 16, 4808 (2023). https://doi.org/10.3390/ma16134808
[8] N. Shaffiar, Z. Lai, and M.N. Tamin, Key Eng. Mater. 462, 1409-1414 (2011). https://doi.org/10.4028/www.scientific.net/KEM.462-463.1409
[9] S.F. Asasaari, N.A. Fadil, and M.N. Tamin, J. Mech. Eng. Sci. 16, 8718-8729 (2022). https://doi.org/10.15282/jmes.16.1.2022.06.0689
[10] O. Jerhaoui, et al., in IEEE 67th Electron. Compon. Technol. Conf. (ECTC), IEEE, (2017).
[11] A. Schubert, et al., in Proc. Electron. Compon. Technol. Conf., 603-610 (2003).
[12] W. Qiang, et al., in Int. Conf. Thermal, Mech. Multi-Phys. Simul. Exper. Microelectron. Micro Syst., EuroSime, (2007).
[13] X.Q. Shi, et al., ASME Trans. J. Electron. Packag. 124, 85-90 (2002).
[14] B.A. Zahn, in Electron. Compon. Technol. Conf., Proc. 53rd, (2003).
[15] A. Nourani, et al., Eng. Fract. Mech. 186, 119-133 (2017). https://doi.org/10.1016/j.engfracmech.2017.09.027

