Physicochemical Characteristics of EPOLA/PEGDA as a 3D Scaffold for Tissue Engineering Application
SITI NURUL SYAFIKA Sheikh Ibrahim, MAT UZIR Wahit, MARINA Talib, NORHAYANI Othman, FARAH FADZEHAH Hilmi
Abstract. Ultraviolet (UV)-assisted curing has gained significant attention in tissue engineering due to its energy efficiency, reduced chemical consumption, and lower environmental impact. The development of 3D biomedical scaffolds requires bioresins that support essential properties such as biocompatibility, cell adhesion and proliferation, and mechanical strength comparable to native tissue. While synthetic polymers like PEGDA provide structural stability, they often lack biofunctionality; hence, natural polymers are incorporated to enhance biological performance. In this study, EPOLA, a natural-based polymer, was integrated into PEGDA to develop a novel EPOLA/PEGDA bioresin scaffold. Comprehensive characterization was conducted to validate successful UV-induced crosslinking, which is critical for achieving desired scaffold performance. Gel fraction analysis demonstrated a 27.48 % increase post-crosslinking, indicating enhanced polymer network formation. FTIR spectroscopy confirmed the presence of EPOLA functional groups, verifying chemical integration within the scaffold matrix. AFM results revealed a marked increase in surface roughness (Rq increased from 0.408 nm to 2.119 nm), suggesting a denser crosslinked structure. Additionally, compressive strength improved by 56.82 %, indicating that mechanical properties can be modulated through crosslinking density. These findings collectively confirm successful crosslinking of the EPOLA/PEGDA bioresin, establishing a foundation for subsequent evaluation of its biofunctionality in tissue engineering applications.
Keywords
3D Scaffold, 3D Printing, SLA, Palm Oil, UV Radiation Crosslinking
Published online 7/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: SITI NURUL SYAFIKA Sheikh Ibrahim, MAT UZIR Wahit, MARINA Talib, NORHAYANI Othman, FARAH FADZEHAH Hilmi, Physicochemical Characteristics of EPOLA/PEGDA as a 3D Scaffold for Tissue Engineering Application, Materials Research Proceedings, Vol. 68, pp 105-112, 2026
DOI: https://doi.org/10.21741/9781644904237-14
The article was published as article 14 of the book Green Materials, Processing & Characterization
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Ibrahim SNSS, Wahit MU, Talib M, Othman N, Shukri NA, Hilmi FF, Arshad MA, UV Radiation Crosslinking of Acrylated Palm Olein (APO) Copolymer Resins for 3D Printing. Key Engineering Materials, Trans Tech Publ (2022). https://doi.org/10.4028/p-h1u335
[2] Masri S, Zawani M, Zulkiflee I, Salleh A, Fadilah NIM, Maarof M, Wen APY, Duman F, Tabata Y, Aziz IA, Bt Hj Idrus R, Fauzi MB, Cellular Interaction of Human Skin Cells towards Natural Bioink via 3D-Bioprinting Technologies for Chronic Wound: A Comprehensive Review, Int J Mol Sci (2022). https://doi.org/10.1016/j.ijbiomac.2024.131623
[3] Zhang F, King MW, Biodegradable Polymers as the Pivotal Player in the Design of Tissue Engineering Scaffolds, Adv Healthc Mater (2020). https://doi.org/10.1002/adhm.201901358
[4] Sivashankari PR, Prabaharan M, Three-dimensional porous scaffolds based on agarose/chitosan/graphene oxide composite for tissue engineering, Int J Biol Macromol (2020), pp.222-31. https://doi.org/10.1016/j.ijbiomac.2019.12.219
[5] Dai L, Cheng T, Duan C, Zhao W, Zhang W, Zou X, Aspler J, Ni Y, 3D printing using plant-derived cellulose and its derivatives: A review, Carbohydr Polym (2019), pp.71-86. https://doi.org/10.1016/j.carbpol.2018.09.027
[6] Corker A, Ng HC, Poole RJ, Garcia-Tunon E, 3D printing with 2D colloids: designing rheology protocols to predict ‘printability’ of soft-materials, Soft Matter (2019), pp.1444-56. https://doi.org/10.1039/C8SM01936C
[7] Alghamdi H, Nair SAO, Neithalath N, Insights into material design, extrusion rheology, and properties of 3D-printable alkali-activated fly ash-based binders, Materials & Design (2019).
[8] Bennett J, Measuring UV Curing Parameters of Commercial Photopolymers used in Additive Manufacturing, Addit Manuf (2017). pp.203-12. https://doi.org/10.1016/j.addma.2017.10.009
[9] Bryant SJ, Nuttelman CR, Anseth KS, Cytocompatibility of UV and visible light photoinitiating systems on cultured NIH/3T3 fibroblasts in vitro, J Biomater Sci Polym Ed (2000). pp.439-57. https://doi.org/10.1163/156856200743805.
[10] Park JW, Shim GS, Lee JG, Jang SW, Kim HJ, Choi JN, Evaluation of UV Curing Properties of Mixture Systems with Differently Sized Monomers, Materials (Basel) (2018). https://doi.org/10.3390/ma11040509
[11] Chen JY, Hwang JV, Ao-Ieong WS, Lin YC, Hsieh YK, Cheng YL, Wang J, Study of Physical and Degradation Properties of 3D-Printed Biodegradable, Photocurable Copolymers, PGSA-co-PEGDA and PGSA-co-PCLDA, Polymers (Basel) (2018). https://doi.org/10.3390/polym10111263
[12] Tajau R, Ibrahim MI, Yunus NM, Mahmood MH, Salleh MZ, Salleh NGN, Development of palm oil-based UV-curable epoxy acrylate and urethane acrylate resins for wood coating application, Advancing Nuclear Research and Energy Development (2014). pp.164-9. https://doi.org/10.1063/1.4866125
[13] Tang J, Zhang J, Lu J, Huang J, Zhang F, Hu Y, Liu C, An R, Miao H, Chen Y, Huang T, Zhou Y, Preparation and Properties of Plant-Oil-Based Epoxy Acrylate-Like Resins for UV-Curable Coatings, Polymers (Basel) (2020). https://doi.org/10.3390/polym12092165
[14] Wang Y, Ma M, Wang J, Zhang W, Lu W, Gao Y, Zhang B, Guo Y, Development of a Photo-Crosslinking, Biodegradable GelMA/PEGDA Hydrogel for Guided Bone Regeneration Materials, Materials (Basel) (2018). https://doi.org/10.3390/ma11081345
[15] Stillman ZS, Jarai BM, Raman N, Patel P, Fromen CA, Degradation Profiles of Poly(ethylene glycol) diacrylate (PEGDA)-based hydrogel nanoparticles, Polym Chem (2020). pp.568-80. https://doi.org/10.1039/C9PY01206K
[16] Burke G, Cao Z, Devine DM, Major I, Preparation of Biodegradable Polyethylene Glycol Dimethacrylate Hydrogels via Thiol-ene Chemistry, Polymers (Basel) (2019). https://doi.org/10.3390/polym11081339
[17] Urrios A, Parra-Cabrera C, Bhattacharjee N, Gonzalez-Suarez AM, Rigat-Brugarolas LG, Nallapatti U, Samitier J, DeForest CA, Posas F, Garcia-Cordero JL, Folch A, 3D-printing of transparent bio-microfluidic devices in PEG-DA, Lab Chip (2016). pp.2287-94. https://doi.org/10.1039/c6lc00153j
[18] Ullah S, Zainol I, Chowdhury SR, Fauzi MB, Development of various composition multicomponent chitosan/fish collagen/glycerin 3D porous scaffolds: Effect on morphology, mechanical strength, biostability and cytocompatibility, Int J Biol Macromol (2018). pp.158-68. https://doi.org/10.1016/j.ijbiomac.2017.12.136
[19] Saber-Samandari S, Saber-Samandari S, Biocompatible nanocomposite scaffolds based on copolymer-grafted chitosan for bone tissue engineering with drug delivery capability, Mater Sci Eng C Mater Biol Appl (2017). pp.721-32. https://doi.org/ 10.1016/j.msec.2017.02.112
[20] Lei Y, Xu Z, Ke Q, Yin W, Chen Y, Zhang C, Guo Y, Strontium hydroxyapatite/chitosan nanohybrid scaffolds with enhanced osteoinductivity for bone tissue engineering, Mater Sci Eng C Mater Biol Appl (2017). pp.134-42. https://doi.org/10.1016/j.msec.2016.11.063
[21] Shamekhi MA, Rabiee A, Mirzadeh H, Mahdavi H, Mohebbi-Kalhori D, Baghaban Eslaminejad M, Fabrication and characterization of hydrothermal cross-linked chitosan porous scaffolds for cartilage tissue engineering applications, Mater Sci Eng C Mater Biol Appl (2017).pp:532-42. https://doi.org/10.1016/j.msec.2017.03.194
[22] Tormos CJ, Madihally SV. Chitosan for cardiac tissue engineering and regeneration. Chitosan Based Biomaterials Volume 2 (2017). p.115-43. https://doi.org/10.1016/B978-0-08-100228-5.00005-5
[23] Tajau R, Rohani R, Salleh MZ, Physicochemical and Thermal Properties of Acrylated Palm Olein as a Promising Biopolymer, Journal of Polymers and the Environment (2020). pp.2734-48. https://doi.org/10.1007/s10924-020-01797-6
[24] Yeoh FH, Lee CS, Kang YB, Wong SF, Cheng SF, Ng WS. Production of Biodegradable Palm Oil-Based Polyurethane as Potential Biomaterial for Biomedical Applications, Polymers (Basel) (2020). https://doi.org/10.3390/polym12081842
[25] Tajau R, Rohani R, Wan Isahak WNR, Salleh MZ, Ghazali Z, Development of new bio-based polyol ester from palm oil for potential polymeric drug carrier, Advances in Polymer Technology (2018). pp.3552-60. https://doi.org/10.1002/adv.22139
[26] Lee D, Song SH, Investigation of Epoxidized Palm Oils as Green Processing Aids and Activators in Rubber Composites, International Journal of Polymer Science (2019). pp.1-7. https://doi.org/10.1155/2019/2152408
[27] Tajau R, Rohani R, Wan Isahak W, Salleh MZ, Palm oil-based precursors for development of polymeric delivery system, Malays J Anal Sci (2017). pp.496-511. https://doi.org/ 10.17576/mjas-2017-2102-25
[28] Ng WS, Lee CS, Chuah CH, Cheng S-F, Preparation and modification of water-blown porous biodegradable polyurethane foams with palm oil-based polyester polyol, Industrial Crops and Products (2017). pp.65-78. https://doi.org/10.1016/j.indcrop.2016.11.066
[29] Fakhari A, Rahmat AR, Wahit MU, Arjmandi R, Bio-Based Hybrid Polymers from Vinyl Ester Resin and Modified Palm Oil: Synthesis and Characterization, International Polymer Processing (2017). pp.20-5. https://doi.org/10.3139/217.3166
[30] Park J-W, Lee J-G, Shim G-S, Kim H-J, Kim Y-K, Moon S-E, No D-H, Evaluation of the Ultraviolet-Curing Kinetics of Ultraviolet-Polymerized Oligomers Cured Using Poly (Ethylene Glycol) Dimethacrylate, Coatings (2018). https://doi.org/10.3390/coatings8030099
[31] Ramanathan G, Singaravelu S, Muthukumar T, Thyagarajan S, Perumal PT, Sivagnanam UT. Design and characterization of 3D hybrid collagen matrixes as a dermal substitute in skin tissue engineering, Mater Sci Eng C Mater Biol Appl (2017). pp.359-70. https://doi.org/10.1016/j.msec.2016.11.095
[32] Ullah S, Zainol I, Idrus RH, Incorporation of zinc oxide nanoparticles into chitosan-collagen 3D porous scaffolds: Effect on morphology, mechanical properties and cytocompatibility of 3D porous scaffolds, Int J Biol Macromol (2017). pp.1020-9. https://doi.org/10.1016/j.ijbiomac.2017.06.080
[33] Haryanto, Kim S, Kim JH, Kim JO, Ku S, Cho H, Han DH, Huh P, Fabrication of poly(ethylene oxide) hydrogels for wound dressing application using E-beam, Macromolecular Research (2013). pp.131-8. https://doi.org/10.1007/s13233-014-2023-z

