Effect of Binder Type on Properties and Remazol Red Adsorption of Porous Activated Carbon Macroballoons
Nurul Izzati MUHAMAD ZAKIR, Zunaida ZAKARIA, Hakimah OSMAN, Abdulhakim MASA
Abstract. Porous activated carbon (PAC) derived from rice husk ash offers a sustainable and low-cost material for dye adsorption in wastewater treatment. This study investigates the incorporation of PAC into hollow macroballoons using four different binders: epoxy resin (Ep), sodium alginate (SA), silicone rubber (Si), and grout (Gr) on their physical, thermal, and adsorption characteristics. Microscopy and SEM analyses revealed that Ep-macroballoon and SA-macroballoon exhibited better PAC encapsulation and smoother surfaces, whereas Si-macroballoon and Gr-macroballoon showed rougher textures with more exposure to PAC particles. FTIR-ATR spectra confirmed the presence of hydroxyl and carboxyl functional groups in Ep-macroballoon and SA-macroballoon, suggesting greater surface reactivity, while Si-macroballoon and Gr-macroballoon exhibited more hydrophobic or inorganic characteristics. Thermal analysis via TGA/DTG showed distinct degradation patterns for each binder type, with SA-macroballoon demonstrating moisture-related weight loss and stable thermal behaviour, while Gr-macroballoon retained the highest final residue due to its inorganic content. Adsorption experiments using 50 mg/L Remazol Red dye solution revealed that Gr-macroballoon achieved rapid and high dye removal but at the expense of PAC leaching and reduced structural stability. In contrast, SA-macroballoon demonstrated sustained dye adsorption with minimal material loss; Ep-macroballoon and Si-macroballoon showed negligible dye removal. This highlights that sodium alginate offers the most effective balance of adsorption capacity and structural integrity for macroballoon functionality in dye removal applications.
Keywords
Adsorption, Porous Carbon, Remazol Red Dye, Macroballoon, Rice Husk Ash
Published online 7/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Nurul Izzati MUHAMAD ZAKIR, Zunaida ZAKARIA, Hakimah OSMAN, Abdulhakim MASA, Effect of Binder Type on Properties and Remazol Red Adsorption of Porous Activated Carbon Macroballoons, Materials Research Proceedings, Vol. 68, pp 1-8, 2026
DOI: https://doi.org/10.21741/9781644904237-1
The article was published as article 1 of the book Green Materials, Processing & Characterization
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] D. Dorairaj, N.T. Govender, Rice and paddy industry in Malaysia: governance and policies, research trends, technology adoption and resilience, Front. Sustain. Food Syst. 7 (2023). https://doi.org/10.3389/fsufs.2023.1093605
[2] N.F. Omar, N.N. Kasim, S.Z. Zainal Abidin, S.N. Ali, A. Abdul Aziz, The impact of rice husk ash (RHA) as soilless growing medium on sawi caixin giant (Brassica parachinensis) growth performance, International Journal of Innovation and Industrial Revolution 5 (2023) 49–64. https://doi.org/10.35631/ijirev.513006
[3] P.K. Singh, I. Kumar, U. Kumar, R.K. Sharma, Soil-mustard revitalization via rice husk ash, a promising soil amendment material for sustainable management of heavy metal contamination in tropical ecosystem, J. Environ. Manage. 355 (2024) 120538. https://doi.org/https://doi.org/10.1016/j.jenvman.2024.120538
[4] N.I.M. Zakir, Z. Zakaria, H. Osman, H. Shukor, A. Masa, Effect of Activating Agent on Porous Activated Carbon in Alginate Macrobeads for Removal of Remazol Red Dye, in: AIP Conf. Proc., American Institute of Physics, 2024. https://doi.org/10.1063/5.0198600
[5] Y.X. Gan, Activated Carbon from Biomass Sustainable Sources, C (Basel). 7 (2021) 39. https://doi.org/10.3390/c7020039
[6] Yuliusman, F. Al Farouq, S.P. Sipangkar, M. Fatkhurrahman, S.A. Putri, Preparation and characterization of activated carbon from corn stalks by chemical activation with KOH and NaOH, in: AIP Conf. Proc., American Institute of Physics Inc., 2020. https://doi.org/10.1063/5.0014403
[7] S.S. Affat, Classifications, Advantages, Disadvantages, Toxicity Effects of Natural and Synthetic Dyes: A review, University of Thi-Qar Journal of Science 8 (2021) 130–135. https://doi.org/10.32792/utq/utjsci/v8/1/21
[8] S. Hamzah, N.B. Swan, N.A. Razali, N.A. Mohamad, N. Rasit, A. Ali, M.S. Sulaiman, A. Jusoh, N.H.H. Hairom, N. Ali, N.I. Yatim, Integration of water treatment sludge and agriculture waste as low-cost adsorbent for remazol red dye removal, Desalination Water Treat. 226 (2021) 408–418. https://doi.org/10.5004/dwt.2021.27263
[9] D.E. Egirani, N.R. Poyi, N. Shehata, Preparation and characterization of powdered and granular activated carbon from Palmae biomass for cadmium removal, International Journal of Environmental Science and Technology 17 (2020) 2443–2454. https://doi.org/10.1007/s13762-020-02652-
[10] J. Lan, B. Wang, C. Bo, B. Gong, J. Ou, Progress on fabrication and application of activated carbon sphere in recent decade, Journal of Industrial and Engineering Chemistry 120 (2023) 47–72. https://doi.org/https://doi.org/10.1016/j.jiec.2022.12.045
[11] N.I.M. Zakir, Z. Zakaria, H. Osman, A. Masa, The adsorption of remazol red dye using porous activated carbon (PAC) from rice husk ash treated using alkali treatment, in: AIP Conf. Proc., American Institute of Physics, (2024). https://doi.org/10.1063/5.0204422
[12] P. Pichniarczyk, M. Niziurska, Properties of ceramic tile adhesives modified by different viscosity hydroxypropyl methylcellulose, Constr. Build. Mater. 77 (2015) 227–232. https://doi.org/10.1016/j.conbuildmat.2014.12.110
[13] M.B. Hunain, S.N. Alnomani, Q. Razzaq, An Investigation of Tensile and Thermal Properties of Epoxy Polymer Modified by Activated Carbon Particle, IOP Conf. Ser. Mater. Sci. Eng. 1094 (2021) 012164. https://doi.org/10.1088/1757-899x/1094/1/012164
[14] D. Kulig, Ł. Bobak, A. Jarmoluk, A. Szmaja, Ż. Król-Kilińska, A. Zimoch-Korzycka, Effect of Chemical Degradation of Sodium Alginate on Capsaicin Encapsulation, Molecules 28 (2023). https://doi.org/10.3390/molecules28237844
[15] M.A. Atiya, A.K. Hassan, F.Q. Kadhim, Green synthesis of copper nanoparticles using tea leaves extract to remove ciprofloxacin (CIP) from aqueous media, Iraqi Journal of Science 62 (2021) 2833–2854. https://doi.org/10.24996/ijs.2021.62.9.1
[16] S.R. Derkach, N.G. Voron’ko, N.I. Sokolan, D.S. Kolotova, Y.A. Kuchina, Interactions between gelatin and sodium alginate: UV and FTIR studies, J. Dispers. Sci. Technol. 41 (2020) 690–698. https://doi.org/10.1080/01932691.2019.1611437
[17] A. Benettayeb, S. Ghosh, M. Usman, F.Z. Seihoub, I. Sohoo, C.H. Chia, M. Sillanpää, Some Well-Known Alginate and Chitosan Modifications Used in Adsorption: A Review, Water (Switzerland) 14 (2022). https://doi.org/10.3390/w14091353
[18] M. Rosi, S. Viridi, Reduction the Oxygen Content of the Coconut Shell Char Produced by Using Simple Pyrolysis Method, in: IOP Conf. Ser. Mater. Sci. Eng., Institute of Physics Publishing, (2018). https://doi.org/10.1088/1757-899X/395/1/012024
[19] A. Abdelnaby, N.M. Abdelaleem, E. Elshewy, A.H. Mansour, S.S. Ibrahim, Application of Bentonite Clay, Date Pit, and Chitosan Nanoparticles as Promising Adsorbents to Sequester Toxic Lead and Cadmium from Milk, Biol. Trace Elem. Res. 201 (2023) 2650–2664. https://doi.org/10.1007/s12011-022-03353-w
[20] S. Al-Bayaty, N. Jubier, R. H. Al-Uqaily, Study of Thermal Decomposition Behavior and Kinetics of Epoxy/Polystyrene Composites by using TGA and DSC, Xi’an Jianzhu Keji Daxue Xuebao/Journal of Xi’an University of Architecture & Technology 12 (2020) 1331–1341.
[21] S. Liu, Y. Li, L. Li, Enhanced stability and mechanical strength of sodium alginate composite films, Carbohydr. Polym. 160 (2017) 62–70. https://doi.org/10.1016/j.carbpol.2016.12.048
[22] A. Salisu, M.M. Sanagi, A. Abu Naim, K.J. Abd Karim, W.A. Wan Ibrahim, U. Abdulganiyu, Alginate graft polyacrylonitrile beads for the removal of lead from aqueous solutions, Polymer Bulletin 73 (2016) 519–537. https://doi.org/10.1007/s00289-015-1504-3
[23] P.N. Fotsing, E.D. Woumfo, S.A. Măicăneanu, J. Vieillard, C. Tcheka, P.T. Ngueagni, J.M. Siéwé, Removal of Cu(II) from aqueous solution using a composite made from cocoa cortex and sodium alginate, Environmental Science and Pollution Research 27 (2020) 8451–8466. https://doi.org/10.1007/s11356-019-07206-3
[24] H. Zhang, Z. Yan, Z. Yang, J. Yao, Q. Mu, D. Peng, H. Zhao, Study on the synthesis and thermal stability of silicone resins reinforced by Si-O-Ph cross-linking, RSC Adv. 11 (2021) 30971–30979. https://doi.org/10.1039/d1ra05524k


