Flow Analysis of Eco-Friendly Geopolymer with Recycled Copper for Rapid Tooling Applications
Sharifah SALSABILA, Z. SHAYFULL, S.M. NASIR, Leong Kean WEI, M. FATHULLAH
Abstract. Injection moulding is one of the most widely used manufacturing processes for producing plastic components with high precision and efficiency. However, warpage remains a critical defect, often caused by uneven cooling and differential shrinkage. The choice of mould material strongly influences cooling efficiency, cycle time, and dimensional stability. Traditionally, P20 tool steel has been the industry standard due to its durability, but its limited thermal conductivity and high machining cost have motivated the search for alternative solutions. This study aims to evaluate recycled copper powder composite (GGMC) as a sustainable alternative to P20 tool steel for mould fabrication. Using Autodesk Moldflow Insight (AMI), simulations of acrylonitrile butadiene styrene (ABS) parts were performed for fill, pack, cooling, and warpage analyses. Results showed that copper-based moulds reduced cooling time by up to 30% compared to P20, owing to superior thermal conductivity, while P20 maintained advantages in tool life for high-cycle production. Warpage analysis confirmed that packing pressure was the dominant factor influencing deformation in the X and Y axes, whereas melt temperature was most critical along the Z axis, with packing time having the least effect. Overall, the findings suggest that recycled copper powder composites provide an effective and sustainable option for rapid tooling and prototype moulds, while P20 remains more suitable for long-term, high-volume manufacturing.
Keywords
Geopolymer, Recycled Copper, Rapid Tooling, Injection Moulding, Warpage, Autodesk Moldflow Insight, Sustainable Manufacturing
Published online 7/15/2026, 9 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Sharifah SALSABILA, Z. SHAYFULL, S.M. NASIR, Leong Kean WEI, M. FATHULLAH, Flow Analysis of Eco-Friendly Geopolymer with Recycled Copper for Rapid Tooling Applications, Materials Research Proceedings, Vol. 68, pp 263-271, 2026
DOI: https://doi.org/10.21741/9781644904237-35
The article was published as article 35 of the book Green Materials, Processing & Characterization
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Abdullah, M. M. A., Kamarudin, H., Mohammed, H., Khairul Nizar, I., Rafiza, A. R., & Zarina, Y. (2011). The relationship of NaOH molarity, Na2SiO3/NaOH ratio, fly ash/alkaline activator ratio, and curing temperature to the strength of fly ash-based geopolymer. Advanced Materials Research, 328-330. doi: 10.4028/www.scientific.net/AMR.328-330.1475 https://doi.org/10.4028/www.scientific.net/AMR.328-330.1475
[2] Ahmad, A. H., Leman, Z., Azmir, M. A., Muhamad, K. F., Harun, W. S. W., Juliawati, A., & Alias, A. B. S. (2009). Optimization of warpage defect in injection moulding process using ABS material. Proceedings – 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009. doi: 10.1109/AMS.2009.120 https://doi.org/10.1109/AMS.2009.120
[3] Buliński, Z., Pawlak, S., Krysiński, T., Adamczyk, W., & Białecki, R. (2019). Application of the ASTM D5470 standard test method for thermal conductivity measurements of high thermal conductive materials. Journal of Achievements in Materials and Manufacturing Engineering, 95(2). doi: 10.5604/01.3001.0013.7915 https://doi.org/10.5604/01.3001.0013.7915
[4] Chen, W. C., Nguyen, M. H., Chiu, W. H., Chen, T. N., & Tai, P. H. (2016). Optimization of the plastic injection molding process using the Taguchi method, RSM, and hybrid GA-PSO. International Journal of Advanced Manufacturing Technology, 83(9-12). doi: 10.1007/s00170-015-7683-0 https://doi.org/10.1007/s00170-015-7683-0
[5] Das, K., Sen, S., Joseph, A., Ghosh, A., Biswas, K., Mukherjee, S., & Ghosh, M. (2023). Investigation on the effects of pretreatment on the surface characteristics of duplex plasma-treated AISI P20 tool steel. Materialia, 27. doi: 10.1016/j.mtla.2023.101679 https://doi.org/10.1016/j.mtla.2023.101679
[6] Dimla, D. E., Camilotto, M., & Miani, F. (2005). Design and optimisation of conformal cooling channels in injection moulding tools. Journal of Materials Processing Technology, 164-165. doi: 10.1016/j.jmatprotec.2005.02.162 https://doi.org/10.1016/j.jmatprotec.2005.02.162
[7] Equbal, A., Sood, A. K., & Shamim, M. (2015). Rapid tooling: A major shift in tooling practice. Manufacturing and Industrial Engineering, 14(3-4). doi: 10.12776/mie.v14i3-4.325 https://doi.org/10.12776/mie.v14i3-4.325
[8] Kashyap, S., & Datta, D. (2015). Process parameter optimization of plastic injection molding: a review. International Journal of Plastics Technology, 19(1). doi: 10.1007/s12588-015-9115-2 https://doi.org/10.1007/s12588-015-9115-2
[9] King, D., & Tansey, T. (2002). Alternative materials for rapid tooling. Journal of Materials Processing Technology, 121(2-3). doi: 10.1016/S0924-0136(01)01145-1 https://doi.org/10.1016/S0924-0136(01)01145-1
[10] Kummara, H., & Gowd, G. H. (2014). Design and Fabrication of Plastic Injection Molding Tool for Pump Gaskets. International Journal of Advanced Engineering Research and Science (IJAERS), 1(3).
[11] Li, J., Bei, J., Liu, W., Xia, X., Zhou, B., Peng, X., & Jiang, S. (2021). Warpage prediction of rhcm crystalline parts based on multi-layers. Polymers, 13(11). doi: 10.3390/polym13111814 https://doi.org/10.3390/polym13111814
[12] Malloy, R. A. (2010). Plastic Part Design for Injection Molding. In Plastic Part Design for Injection Molding. doi: 10.3139/9783446433748.fm https://doi.org/10.3139/9783446433748.fm
[13] Mustafa Al Bakri, A. M., Kamarudin, H., Bnhussain, M., Rafiza, A. R., & Zarina, Y. (2012). Effect of Na2SiO3/NaOH ratios and NaOH molarities on compressive strength of fly-ash-based geopolymer. ACI Materials Journal, 109(5). doi: 10.14359/51684080 https://doi.org/10.14359/51684080
[14] Priyadarshini, M., Behera, A., Biswas, C. K., & Rajak, D. K. (2022). Experimental Analysis and Mechanical Characterization of AISI P20 Tool Steel Through Heat-Treatment Process. Journal of Bio- and Tribo-Corrosion, 8(1). doi: 10.1007/s40735-021-00607-3 https://doi.org/10.1007/s40735-021-00607-3
[15] Sandanayake, M., Gunasekara, C., Law, D., Zhang, G., Setunge, S., & Wanijuru, D. (2020). Sustainable criterion selection framework for green building materials – An optimisation based study of fly-ash Geopolymer concrete. Sustainable Materials and Technologies, 25. doi: 10.1016/j.susmat.2020.e00178 https://doi.org/10.1016/j.susmat.2020.e00178
[16] Shan, Z., Yan, Y., Zhang, R., Lu, Q., & Guan, L. (2003). Rapid manufacture of metal tooling by rapid prototyping. International Journal of Advanced Manufacturing Technology, 21(7). doi: 10.1007/s001700300055 https://doi.org/10.1007/s001700300055
[17] Shoemaker, J. (2006). Moldflow Design Guide : A Resource for Plastics Engineers. In Moldflow Design Guide. https://doi.org/10.3139/9783446418547.fm
[18] Tang, S. H., Kong, Y. M., Sapuan, S. M., Samin, R., & Sulaiman, S. (2006). Design and thermal analysis of plastic injection mould. Journal of Materials Processing Technology, 171(2). doi: 10.1016/j.jmatprotec.2005.06.075 https://doi.org/10.1016/j.jmatprotec.2005.06.075

