Using the Taguchi Approach for Investigating Mechanical Properties of Recycled Carbon Black Reinforced Acrylonitrile Butadiene Styrene (ABS) and Polylactic Acid (PLA) for Injection Moulding Applications

Using the Taguchi Approach for Investigating Mechanical Properties of Recycled Carbon Black Reinforced Acrylonitrile Butadiene Styrene (ABS) and Polylactic Acid (PLA) for Injection Moulding Applications

A.E. KASIM, N.A. SHUAIB, C.C. FOOI, C.R. QUAN, M.H.J.A. HADI, U.F. M. ALI, A.F. OSMAN

Abstract. Carbon black production and demand are expanding globally due to the continued production of automotive, aerospace and many other plastic industries. This is concerning because carbon black waste has the potential to harm the environment and public health. Efforts must be taken to limit the consumption. Recovered carbon black (rCB) is currently a good alternative product. However, using re-claimed carbon black can be difficult, particularly in injection moulding processing. Lack of study and information about processing conditions makes assessing the end product’s mechanical properties difficult. This study focused on processing parameters such as thermoplastic type, rCB weight loading, and injection moulding pressure. The L4 Taguchi orthogonal design was utilised to reduce experimental runs while still gathering quantitative results. From the results, type of plastic is the most dominant factor followed by weight loading and injection pressure. Optimisation of the parameters should depend on the product’s final application. This study highlights the potential use of rCB in reinforcing pure thermoplastics as an alternative material to virgin carbon black (vCB).

Keywords
Recycled Carbon Black, Taguchi Approach, Mechanical Testing

Published online 7/15/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: A.E. KASIM, N.A. SHUAIB, C.C. FOOI, C.R. QUAN, M.H.J.A. HADI, U.F. M. ALI, A.F. OSMAN, Using the Taguchi Approach for Investigating Mechanical Properties of Recycled Carbon Black Reinforced Acrylonitrile Butadiene Styrene (ABS) and Polylactic Acid (PLA) for Injection Moulding Applications, Materials Research Proceedings, Vol. 68, pp 315-321, 2026

DOI: https://doi.org/10.21741/9781644904237-42

The article was published as article 42 of the book Green Materials, Processing & Characterization

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Tofighy, M. A. and Mohammadi, T., Carbon-Based Nanofillers and Their Rubber Nanocomposites: Fundamentals and Applications (Elsevier), 253–285, (2019). https://doi.org/10.1016/B978-0-12-817342-8.00009-3
[2] Nan, X., Zhang, Y., Shen, J., Liang, R., Wang, J., Jia, L., Yang, X., Yu, W. and Zhang, Z., Polymers, 16, 2539, (2024).
[3] Lohar, G. S. and Jogi, B. F., Procedia Manuf., 20, 85–90, (2018).
[4] Zainudin, S., Shuaib, N. A., Omar, N. W. Y. and Azmi, A. I., Int. J. Mod. Manuf. Technol., 13(2), 149–154, (2021).
[5] Yadav, R., Pancharya, A. and Kant, R., Mater. Today: Proc., (2020). https://doi.org/10.1016/j.matpr.2020.09.486
[6] Savetlana, S., Zulhendri, Sukmana, I. and Saputra, F. A., “The effect of carbon black loading and structure on tensile property of natural rubber composite,” in Innovation in Polymer Science and Technology 2016 (IPST 2016), IOP Conf. Ser.: Mater. Sci. Eng., 223, 012009, (2016).
[7] Siva, R., Nemali, S. R., Kunchapu, S. K., Gokul, K. and Arun Kumar, T., Mater. Today: Proc., 47, 4382–4386, (2021). https://doi.org/10.1016/j.matpr.2021.05.189