Exploring the Impact of Carbon Fiber Incorporation on the Mechanical Properties of PLA Composites

Exploring the Impact of Carbon Fiber Incorporation on the Mechanical Properties of PLA Composites

Yusrina MAT DAUD, Hazwani ZAIDOL, Mohammad Firdaus ABU HASHIM, Luqman MUSA, Mohamad Syahmie MOHAMAD RASIDI, Ahmad Azrem AZMI, Lokman Hakim IBRAHIM, Muhammad Al Fatih HENDRAWAN, Kholqillah Ardhian ILMAN, Agus Dwi ANGGONO, Bambang Waluyo FEBRIANTOKO

Abstract. This research investigates the influence of carbon fiber loading on PLA/Carbon Fiber composites utilizing coir coconut husk (CCH) as a sustainable resource. The objective is to evaluate the mechanical and physical characteristics of PLA with varying carbon fiber loadings (0%, 5%, 10%, 15%, and 20%). Fiber is extracted from CCH, carbonized to generate carbon fiber, and compounded with PLA. Test results indicate that a 10% carbon fiber loading yields the most favorable mechanical properties. The study concludes that introducing carbon fiber at its optimum value is highly recommended to attain exceptional properties in PLA.

Keywords
PLA, Carbon Fiber, Coconut Husk

Published online 7/15/2026, 5 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Yusrina MAT DAUD, Hazwani ZAIDOL, Mohammad Firdaus ABU HASHIM, Luqman MUSA, Mohamad Syahmie MOHAMAD RASIDI, Ahmad Azrem AZMI, Lokman Hakim IBRAHIM, Muhammad Al Fatih HENDRAWAN, Kholqillah Ardhian ILMAN, Agus Dwi ANGGONO, Bambang Waluyo FEBRIANTOKO, Exploring the Impact of Carbon Fiber Incorporation on the Mechanical Properties of PLA Composites, Materials Research Proceedings, Vol. 68, pp 121-125, 2026

DOI: https://doi.org/10.21741/9781644904237-16

The article was published as article 16 of the book Green Materials, Processing & Characterization

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] R. Siakeng, M. Jawaid, H. Ariffin, S.M. Sapuan, M. Asim, and N. Saba, Natural fiber reinforced polylactic acid composites : A review, Polym. Compos. 40 (2018) 446-463. https://doi.org/10.1002/pc.24747.
[2] S.H. Sanei and D. Popescu, 3D printed carbon fiber reinforced polymers composites : A systemic review, J. Compos. Sci.4 (2020) 98. https://doi.org/10.3390/jcs4030098
[3] T. Yu, Z. Zhang, S. Song, Y. Bai, and D. Wu, Effect of fiber-layer position on mechanical properties of carbon fiber reinforced materials manufactured by fused deposition modelling, Compos. Struct. 225 (2019) 111147. https://doi.org/10.17222/mit.2022.419
[4] S. Wasti, E. Triggs, R. Farag, M. Auad, S. Adhikari, D. Bajwa, M. Li, and A.J. Ragauskas, Comparison of additive manufacturing and injection molding of biocomposites reinforced with alkali-treated wood flour derived from recycled wooden pallets. Composites Part B: Engineering. 205 (2021) 108483. https://doi.org/10.3390/polym17152004
[5] H.P.S. Abdul Khalil, H.M. Fizree, A.H. Bhat, M. Jawaid, and C.K. Abdullah, Development and characterization of epoxy nanocomposites based on nano-structured oil palm ash, Compos. B Eng. 53 (2013) 324-333. https://doi.org/10.1016/j.compositesb.2013.04.013
[6] I.N. Nasidi, L.H. Ismail, and E.M. Samsudin, Pertanika Journal of Science and Technology. 29 (2021) 693-706. https://doi.org/10.1038/s41598-025-10825-1
[7] V. Thakur, R. Kumar, R. Kumar, R. Singh, and V. Kumar, Recent advances in fused deposition modeling based additive manufacturing of thermoplastic composite structures: A review. J. Thermoplas. Compos. Mater. 36 (2023) 3094-3132.