Effect of Stirring Temperature and Blend Ratio on Flexural and Water Absorption of Toughened PVC/PCL Blends
Zulaikha DAMSAR, Sharifah Shahnaz SYED BAKAR, Muhammad Salihin ZAKARIA
Abstract. To develop a more sustainable, flexible and biocompatible material, this study explores the blending effect of polyvinyl chloride (PVC), a plastic commodity with polycaprolactone (PCL), which known for its biodegradability and biocompatibility. The aim of this study was to identify the effect of stirring temperature on flexural and morphological properties of PVC/PCL blend. This was achieved by using different weight ratios of PVC/PCL blends, 100:0, 70:30, 50:50, and 30:70 with 10 wt.% tetrahydrofuran (THF) as a solvent and stirred at 25°C and 40°C. The blend was fabricated using solution casting methods. The mechanical, morphological, and physical properties of the blend were analyzed. Results revealed that the 30:70 blend stirred at 40°C exhibited the highest flexural strength (23.76 MPa) and 50:50 blend exhibited highest hardness (91.33 Shore A), indicating PCL contributes significantly to mechanical reinforcement likely due to its crystallinity. Microscopy revealed lamellar PVC structures and voids in 70:30 blends at both 25 °C and 40°C, suggesting poor miscibility and phase separation. SEM revealed that the 30:70 blend at 40°C exhibited the smoothest and homogenous fracture surface. Furthermore, water absorption was significantly reduced in 50:50 and 70:30 blends stirred at 40 °C. Overall findings demonstrate that the optimal PVC: PCL ratio is 30:70 and higher stirring temperature (40 °C) enhance structural and functional performance of PVC/PCL blends.
Keywords
Polyvinyl chloride (PVC), Polycaprolactone (PCL), Polymer Blends, Mechanical Properties, Stirring Temperature
Published online 7/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Zulaikha DAMSAR, Sharifah Shahnaz SYED BAKAR, Muhammad Salihin ZAKARIA, Effect of Stirring Temperature and Blend Ratio on Flexural and Water Absorption of Toughened PVC/PCL Blends, Materials Research Proceedings, Vol. 68, pp 9-16, 2026
DOI: https://doi.org/10.21741/9781644904237-2
The article was published as article 2 of the book Green Materials, Processing & Characterization
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Khambatta, F. B., Warner, F., Russell, T., & Stein, R. S. (1976). Small‐angle x‐ray and light scattering studies of the morphology of blends of poly(ϵ‐caprolactone) with poly(vinyl chloride). Journal of Polymer Science Polymer Physics Edition, 14(8), 1391–1424. https://doi.org/10.1002/pol.1976.180140805
[2] Eastmond, G.C. (2000). Poly(ε-caprolactone) Blends. In: Eastmond, G.C., Höcker, H., Klee, D. (eds) Biomedical Applications Polymer Blends. Advances in Polymer Science, vol 149. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-48838-3_2
[3] Rusu, M., Ursu, M., & Rusu, D. (2006). Poly(vinyl chloride) and Poly(e-caprolactone) Blends for Medical Use. Journal of Thermoplastic Composite Materials, 19(2), 173–190. https://doi.org/10.1177/0892705706056463
[4] Rahmatabadi, D., Aberoumand, M., Soltanmohammadi, K., Soleyman, E., Ghasemi, I., Baniassadi, M., Abrinia, K., Bodaghi, M., & Baghani, M. (2023). Toughening PVC with Biocompatible PCL Softeners for Supreme Mechanical Properties, Morphology, Shape Memory Effects, and FFF Printability. Macromolecular Materials and Engineering, 308(10). https://doi.org/10.1002/mame.202300114
[5] Chiu, F.-C., & Min, K. (2000). Miscibility, morphology and tensile properties of vinyl chloride polymer and poly(ε-caprolactone) blends. Polymer International, 49(2), 223–234. https://doi.org/10.1002/(SICI)1097-0126(200002)49:2<223::AID-PI345>3.0.CO;2-U
[6] Pekdemir, M. E., Öner, E., Kök, M., & Qader, I. N. (2021). Thermal behavior and shape memory properties of PCL blends film with PVC and PMMA polymers. Iranian Polymer Journal, 30(6), 633–641. https://doi.org/10.1007/s13726-021-00919-8
[7] Pangesty, A. I., & Todo, M. (2021). Improvement of mechanical strength of tissue engineering scaffold due to the temperature control of polymer blend solution. Journal of Functional Biomaterials, 12(3), 47. https://doi.org/10.3390/jfb12030047
[8] Russell, T. P., & Stein, R. S. (1983). An investigation of the compatibility and morphology of semicrystalline poly(ε‐caprolactone)–poly(vinyl chloride) blends. Journal of Polymer Science Polymer Physics Edition, 21(7), 999–1010. https://doi.org/10.1002/pol.1983.180210701
[9] Liu, W., Zhang, R., Huang, M., Dong, X., Xu, W., Ray, N., & Zhu, J. (2016). Design and structural study of a triple-shape memory PCL/PVC blend. Polymer, 104, 115–122. https://doi.org/10.1016/j.polymer.2016.09.079
[10] Wu, C. (2003). Physical properties and biodegradability of maleated-polycaprolactone/starch composite. Polymer Degradation and Stability, 80(1), 127–134. https://doi.org/10.1016/s0141-3910(02)00393-2

