Surface Performance Evaluation of Lattice Structure Produce by Fused Deposition Modeling Machine Using Design of Experiment (DOE)
N.A.M. RAZIP, M.A. ISMAIL, S. SHAHARUDDIN, M. JOHAR, Z. MOHAMMAD, M.S.E. KOSNAN
Abstract. Additive manufacturing has evolved as a cutting-edge approach that has the potential to transform traditional production methods. Its layer-by-layer build-up approach allows the creation of complex form and geometric structures, offering remarkable efficiency while minimizing material waste and reducing manufacturing costs compared to traditional subtractive process. Fused Deposition Modelling (FDM) has attracted attention among additive manufacturing technologies for its capabilities to construct complex lattice structures, which enable lightweight de-signs with equivalent or higher mechanical performance to traditional solid structures. However, the presence of geometrical and surface texture imperfections in lattice designs have a substantial impact on their mechanical performance. As a result, achieving dimensional accuracy and surface texture in FDM-based additive manufacturing remains a critical challenge. This research aims to investigate the capabilities of Fused Deposition Modelling machines to create complex lattice structures. FDM will be used to create three different lattice designs with variable diameters. A Design of Experiment (DOE) study and statistical analysis methods will be used to evaluate the quality of surface texture of these structures. The outcomes of this study will enhance the quality of surface finish of lattice structures produced by additive manufacturing machine.
Keywords
Additive Manufacturing, Surface Performance, Fused Deposition Modelling (FDM)
Published online 7/15/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: N.A.M. RAZIP, M.A. ISMAIL, S. SHAHARUDDIN, M. JOHAR, Z. MOHAMMAD, M.S.E. KOSNAN, Surface Performance Evaluation of Lattice Structure Produce by Fused Deposition Modeling Machine Using Design of Experiment (DOE), Materials Research Proceedings, Vol. 68, pp 308-314, 2026
DOI: https://doi.org/10.21741/9781644904237-41
The article was published as article 41 of the book Green Materials, Processing & Characterization
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] S. Daminabo, S. Goel, S. Grammatikos, H. Nezhad, and V.K. Thakur, Mater. Today Chem. 16, 100248 (2020). https://doi.org/10.1016/j.mtchem.2020.100248
[2] C.G. Ferro, S. Varetti, G. De Pasquale, and P. Maggiore, Mater. Today Commun. 15, 185-189 (2018). https://doi.org/10.1016/j.mtcomm.2018.03.007
[3] Z.S. Bagheri, D. Melancon, L. Liu, R.B. Johnston, and D. Pasini, J. Mech. Behav. Biomed. Mater. 70, 17-27 (2017). https://doi.org/10.1016/j.jmbbm.2016.04.041
[4] A. Gisario, M. Kazarian, F. Martina, and M. Mehrpouya, J. Manuf. Syst. 53, 124-149 (2019). https://doi.org/10.1016/j.jmsy.2019.08.005
[5] W. Zhu, Prog. Aerosp. Sci., (2019).
[6] L. Yuan, S. Ding, and C. Wen, Bioact. Mater. 4, 56-70 (2019). https://doi.org/10.1016/j.bioactmat.2018.12.003
[7] F. Zanini, M. Sorgato, E. Savio, and S. Carmignato, (no journal info available).
[8] A. Kumar, L. Collini, A. Daurel, and J.-Y. Jeng, Addit. Manuf., 101168 (2020). https://doi.org/10.1016/j.addma.2020.101168
[9] V. Sufiiarov, V. Sokolova, E. Borisov, A. Orlov, and A. Popovich, Mater. Today Proc., (2020).
[10] L. Bochmann, C. Bayley, M. Helu, R. Transchel, K. Wegener, and D. Dornfeld, Surf. Topogr. Metrol. Prop. 3, 014002 (2015). https://doi.org/10.1088/2051-672X/3/1/014002

