Metal Forming 2024
Eds. Danuta Szeliga, Krzysztof Muszka
Materials Research Proceedings Volume 44
Publication Date 2024, 796 pages
print ISBN 9781644903247 (release date September 2024)
ePDF ISBN 9781644903254
DOI: https://doi.or/10.21741/9781644903254
The book covers a great range of topics, including (1) Incremental forming and metal forming of 3D printed materials; (2) numerical modeling of processes and systems; (3) material characterization techniques for predicting microstructure evolution and mechanical properties during or after thermomechanical processing; (4) constitutive and numerical modeling, as well as process and system optimization. The materials covered include metal powders, lightweight systems, advanced high-strength steels, multiphase materials, and high-entropy alloys.
Table of Contents
Microstructure and hot deformation behavior of twin roll cast ZAX210 magnesium wire
KADEN Christoph, GHORPADE Vishal, ULLMANN Madlen, PRAHL Ulrich
Effect of ribs on torque in bending of rebars
HIGAKI Satoshi, NAITO Haruto, GO Tomoki, SASADA Masahiro, TANAKA Tatsuya
Analysis of the influence of spinning temperature on the coordinated deformation of Mg/Al composite tube
ZHENG Jinbin, SHU Xuedao, LI Zixuan, XU Haijie
Hot local compression and die quench ausforming of quenchable steel sheet
MAENO Tomoyoshi, IKEDA Yuto, HANADA Akihiro, MORI Ken-ichiro
The influence of dynamic characteristics of six-bar linkage mechanical press transmission system on the accuracy of slider
ZHAI Hua, ZHANG Yingjie, SONG Zhaoai, ZANG Congyun, ZHANG QingLin, LV Pin, LI Jiajie
Research on circumferential tension-axial shear loading of thin-walled aluminum alloy tubes
ZHANG Shuning, WANG Xiaosong, YU Bingzhai, LIU Gang
Numerical investigation of buckling behaviour of grid stiffened panel with opening during creep age forming
ZHOU Qingheng, XIAO Xuelian, KANG Shaoming, HUANG Xia, LI Yong, LI Dongsheng, ZHOU Wenbin
Advanced elastic-plastic constitutive models for medium-thickness high-strength steel plates: Microstructure-based parameter identification and verification
HU Xiao, ZHOU Yu, GAO Chenxin, SHI Liya, LIAO Yong, ZHANG Haiming, WANG Feilong, WANG Liangyun
Superplastic microstructure characteristics and unified constitutive model of TA32 titanium alloy
LIU Yang, WANG Chunhui, LI Zhiqiang, ZHANG Ning, ZHAO Bing, SUN Chaoyang
Experimental formability evaluation for aluminium alloy sheets under hot stamping conditions
ZHANG Ruiqiang, LI Jiaqi, SHI Zhusheng, LIN Jianguo
Plastic flow modelling under abrupt strain-path change and parameter identification method
ZHANG Tianyin, HAN Xianhong
Simulation of texture-related micro-indentation behavior of typical HCP alloy plates
ZHOU Xiangyu, ZHOU Kecheng, WU Peidong, XU Zhutian, PENG Linfa, LI Shuhui, WANG Huamiao
Forming of lightweight helical gears by means of sheet-bulk metal forming
RECK Manuel, MERKLEIN Marion
Design and simulation of cross wedge rolling process for hollow motor shaft
HAN M., LIU J.X., SHI M.J., SONG H.W., ZHANG S.H., CHENG M.
Effects of forming conditions on limit of drawing ratio during cold drawing and ironing process of Ti-6Al-4V alloy sheets
OKUDE Yusuke, IWAOKA Taku, NAKAMURA Isao, MURAOKA Tsuyoshi, KATAGIRI Takashi
Study on microstructural behavior of aluminum alloy thin-walled tube necking formed by three-roll skew rolling
CHEN Y.S., SHU X.D., XIA Y.X., HU J., LI Z.X., XU H.J., ZHANG S.
Development and industrial implementation of a biodegradable surgical wire production technology from ZnMg0.004 alloy: In vitro assessment of degradation rate and mechanical property changes
MILENIN Andrij, KUSTRA Piotr, PAĆKO Marek, BYRSKA-WÓJCIK Dorota, SULEJ-CHOJNACKA Joanna, PÓŁROLNICZAK Joanna, BARWIŃSKI Roman, KOPAŁA Marcin
Material flow analysis in friction stir consolidation during recycling aluminum alloy chips
LATIF Abdul, PULEO Riccardo, INGARAO Giuseppe, MICARI Fabrizio, FRATINI Livan
Surface integrity analysis of 304 stainless steel after slurry blasting
CHAI Ze-lin, ZHOU Cun-long, GUO Rui, JIANG Zhengyi
New evaluation method for cold-forge solid phase bonding of dissimilar metals
OKAMOTO Haruki, ABE Eiji, HARADA Hiroshi, YUKAWA Nobuki
Magnetic pulse-assisted semi-solid brazing of Cu/Al tube joints and oxide film removal mechanism
RUI Zhenglei, HUANG Shangyu
Solid state recycling operations for AA7075
HAN Chenyang, SIMONETTO Enrico, GHIOTTI Andrea, BRUSCHI Stefania, LATIF Abdul, INGARAO Giuseppe, MICARI Fabrizio, FRATINI Livan
FEM study of process parameters in a novel superplastic forming of titanium alloy Ti-6Al-4V
LIU Jun, PARAMESWARAN Elangovan, YAKUSHINA Evgenia, ZUELLI Nicola, MILLIKEN David M., HUMPHREYS Nick, GILL Les, GREENOUGH Christopher
Response of vacuum vessel inner shell under low-speed impact
ZHAI Hua, WANG Xuncheng, LI Cheng, MA Jianguo, LIU Zhihong, WU Yucheng
Concurrent Improvement of strength, formability and SCC resistance of Al-Zn-Mg-Cu alloy by hot stamping after rapid heating and re-aging on paint baking treatment
HIROSAWA Shoichi, KIM Junmo, MAENO Tomoyoshi, SUZUKI Yasushi, YABUKI Yuuji
Effect of grain size on blank holder force of fine micro-blanking for Inconel 718 superalloy foils
JI Kaisheng, LIU Yanxiong, ZHOU Wangbiao, WU Mengfei, ZHANG Han, GONG Yucheng
Contour precision controlling of welding distortion in fabrication for stainless steel hyperbolic shells adopting mechanical constraints
ZHAI Hua, LI Cheng, LIU Zhihong, MA Jianguo, JI Haibiao, YAN Jianwen, LIU Qiong, ZHU Xiaofeng
Wrinkling behavior of the ultra-thin components with variable cross-sectional perimeter during bending process with local support
ZHUANG Yongpeng, HAN Cong
Environmental impact assessment and comparative analysis of hot stamping and cold stamping processes: A cradle-to-gate lifecycle assessment study
BUCCONI Marco, KARKASINAS Aineias, LIU Jun, PARAMESWARAN Elangovan
Segmented blank holder concept to influence the forming zone during incremental bending
PANICK Daniel, FROHN-SÖRENSEN Peter, ENGEL Bernd
Study influence of forming process on microstructure and properties of deep hole thick wall pipe blank
LEI Bingwang, LIU Haijiang, TU Mingjin, WANG Jiaoqi, WANG Xing, QIN Ruiting, KOU Yanyan, LIU Pengfei
Reduction of springback of Ti6Al4V alloy in ultrasonic vibration assisted deformation: Numerical simulation and experimental study
GAO Meng, WEN Dongxu, LI Jianjun, HUANG Liang
The effect of web tension on calendering wrinkles and corrugations of coated foils
FU Zejun, XU Zhutian, PENG Linfa
Deformation laws and design method of near-net rolling for L-section rings with profile axial conical rolls
QIAN Dongsheng, GU Yixuan, DENG Jiadong, WANG Feng
Microstructure and texture evolution of Mg-Zn-Al-Ca (ZAX210) during groove rolling
STIRL Max, ULLMANN Madlen, PRAHL Ulrich
Forming of magnesium alloy cup using friction heated punch
HARADA Yasunori, TAKAHARA Taiki
Effect of surface characteristics on strain distribution in air- bending
KAIJALAINEN Antti, POKKA Aki-Petteri, JASKARI Matias, HUUKI Juha, HINTSALA Tommi, KÖMI Jukka
Hole expansion performance of a medium manganese advanced high-strength steel after hot rolling and intercritical annealing
PLOSILA Pekka, KANTANEN Pekka, HANNULA Jaakko, JAVAHERI Vahid, KÖMI Jukka, KAIJALAINEN Antti
Improvement of formability of silicon-containing recycled wrought aluminum alloy by hot stamping after rapid heating
KAWANA Ryohei, HIROSAWA Shoichi, OOTAKI Mitsuhiro, MAENO Tomoyoshi, SUZUKI Yasushi, YABUKI Yuuji
Development of X40CrSiMo10-2 steel series for heavy-duty in hot environment of marine diesel engines
EL-BITAR Taher, EL-MELIGY Maha, GAMIL Mohammed
Influence of particle characteristics on mechanical properties of particle reinforced tungsten alloys
XIAO Fangnao, CHENG Gang, BARRIERE Thierry
Research of MF series glass protective lubricant for titanium alloy precision forging process
FENG Chi, DUAN Su-jie
The role of thermomechanical processing in controlling the microstructure inhomogeneity as a way to create special properties of (FeMnNiCo)1-x Mox high entropy alloy – a practical approach
CICHOCKI Kamil, BAŁA Piotr, HENSCHEL Sebastian, KRÜGER Lutz, MUSZKA Krzysztof
Microstructure, strain rate, and temperature effects on the compressive loading behavior of (FeMnNiCo)1-xMox high entropy alloy
KRÜGER Lutz, CICHOCKI Kamil, HENSCHEL Sebastian, CHULIST Robert, BAŁA Piotr, MUSZKA Krzysztof
Investigation of mesoscale deformation and damage behaviour in high-carbon bearing steel via multiscale simulations and experiments
WANG Huiling, QIAN Dongsheng, WANG Feng, HUA Lin
Effects of network-distributed TiB on dynamic recrystallization of TiB/(TA15-Si) composites during the deformation in β phase region
LI Liting, WANG Kehuan, WANG Dongjun, LIU Gang
Semisolid deposition of metallic material by extrusion-base analytical and simulative methodologies
BRUNI Carlo
Roll pass design for round and square sections using an informed artificial neural network
OVERHAGEN Christian, MARTIN Robert
Effect of ductile cast iron tool with grooved polishing and die coatings on friction behaviour in flat strip drawing of A7075-T6 alloy strip with quick heating
HARADA Sohdai, MAENO Tomoyoshi, NOMURA Atsuya, HIROSAWA Shoichi, YABUKI Yuji, SUZUKI Yasushi
Lightweight battery enclosure design
GANGULI Tanmay, DATE Prashant P.
Residual stress and part distortion prediction in L-PBF of Ti-6Al-4V using layer-by-layer FEM simulation
POLLARA Gaetano, PALMERI Dina, BUFFA Gianluca, FRATINI Livan
Modelling of dynamic scale layer growth considering temperature, time and alloying elements
BERGELT Tim, GRAF Marcel, HUNZE-TRETOW Jan, BEHRENS Bernd-Arno, LAMPKE Thomas
Neural surrogate-driven modelling, optimisation, and generation of engineering designs: A concise review
CHEN Siyi, DING Jiangfeng, SHAO Zhutao, SHI Zhusheng, LIN Jianguo
Electroshock plastic constitutive modelling of high strength aluminum alloy based on GA-BP neural network
SONG Yanli, XU Hainan, CHEN Long, LU Jue, HUA Lin
A review of deep neuron network applications in extrusion die design
DING Jiangfeng, CHEN Siyi, SHAO Zhutao, SHI Zhusheng, LIN Jianguo
The influence of process parameters on the axial force of the continuous rolling section in the synchronous forming process of shape and inner hole for hollow axles
YE Caoqi, SHU Xuedao, WANG Jitai, XIA Yingxiang, LI Zixuan, XU Haijie
Optimizing deep drawing parameters for power battery shells through the integration of feature-weighted SVM and genetic algorithm
WANG Ruoda, SUN Yu, WU Kai, WANG Yu
Knowledge-guided particle swarm optimization of multi-link systems for cold and warm forging presses
ZHENG Han, SUN Yu, NI Jun, DING WuXue
Development of unified constitutive model for hot deformation behavior of TC4 with and without diffusion bonding
CAI Zhongman, CHEN Haosheng, LI Can, CHEN Jiarui, LI Xiaoxing, LI Yong
A customized design tool incorporating web and client functions for new mechanical presses
NI Jun, SUN Yu, WANG Yu, WU Kai
Slider movement planning based on improved S-curve acceleration algorithms for servo presses
WANG Jun, WU Kai, DING Wuxue
Influence of hardening model on draw-bending springback prediction of DP980 dual-phase steel
ZHENG Xuebin, HAN Longshuai, Hongwei E, LIU Yu, LI Xuetao, WU Xiangdong, WAN Min
Eccentricity-resistant process design and finite element analysis of deep hole cylindrical parts
LI Shuo, ZHAI Yuewen, HE Xiaomao, QIN Sixiao, JIN Hong
Integrating Numerical and experimental analyses for the realization of pre-detection of delayed fractures on punched surfaces of ultra-high-strength steel sheets
UEDA Yuya, EGUCHI Jin, MATSUNO Takashi
Multi-scale numerical modeling of the multi-pass rolling texture evolution by using crystal plasticity and finite element method
BYRSKA-WÓJCIK Dorota, WIERZBANOWSKI Krzysztof, WRÓBEL Mirosław, BŁONIARZ Remigiusz
Effect of counter punch on formability in two-step compression forming for producing extremely deep cup
KAJIKAWA Shohei, UMEHARA Yutaro, KUBOKI Takashi, IIZUKA Takashi
Development of a Mg-6.8Y-2.5Zn-0.4Zr alloy (WZ73) under varying twin roll casting conditions
UEBERSCHÄR Franziska, ULLMANN Madlen, PRAHL Ulrich
Suppression of non-uniform deformation using die shape in cylindrical deep drawing
MURAOKA Tsuyoshi, OKUDE Yusuke, NAKAMURA Isao, KATAGIRI Takashi
Twin roll casting of ZAX210 magnesium wire: Processing, microstructure, texture and mechanical properties
KITTNER Kristina, ULLMANN Madlen, PRAHL Ulrich
Effect of feed pitch on formability in tube expansion using ball spin forming
OGURI Soma, KAJIKAWA Shohei, KUBOKI Takashi
Evaluation of the friction and wear behavior of a-C:H coatings for lubricant-reduced sheet metal forming
REBLITZ Jonas, ZETTL Bastian, SEYNSTAHL Armin, ORGELDINGER Christian, TREMMEL Stephan, MERKLEIN Marion
Research on material deformation in double-sided shearing with preventing enlargement of sheet material on the die using digital image correlation
UEDA Kouki, SASADA Masahiro, TANAKA Tatsuya
Example of the methodology for producing heterostructural systems using plastic deformation
PABICH Bartłomiej, MAJTA Janusz, KWIECIEŃ Marcin, CICHOCKI Kamil, BŁONIARZ Remigiusz
Development of joining technology between FeCrAl alloys and fusion reactor piping materials
KANAI Ryui, NAOKO Oono, INAO Daisuke, NAGASAKA Takuya, HOKAMOTO Kazuyuki
Hemming for improvement of joint strength in aluminium alloy and carbon fibre-reinforced thermoplastic sheets
ABE Yohei, KIMURA Kensuke
α’-martensite grading techniques in reverse flow forming of AISI 304L
ARIAN Bahman, HOMBERG Werner, KERSTING Lukas, TRÄCHTLER Ansgar, ROZO VASQUEZ Julian, WALTHER Frank
Microstructure evolution of semi-solid billet fabricated by semi-solid isothermal heat treatment of wrought AlSi7Mg aluminum alloy
JIANG Jufu, SONG Tao, WANG Ying, ZHANG Ying, ZHU Liang, DONG Jian
The continuous rotary extrusion (CRE) process of the AZ31 magnesium alloy with various deformation zone geometry
MITKA Monika, MISIOLEK Wojciech Z., LECH-GREGA Marzena, LIMANÓWKA Kamila, SZYMAŃSKI Wojciech
Achievement of martensite strengthening in titanium alloy thin-walled components via non-equilibrium hot stamping
CHANG Shupeng, HUANG Shuaijun, WANG Kehuan, LI Zhe, WEN Zehua, LIU Gang
Study of die punching process for hot stamped high strength steel and its performance evaluation
CHEN Jiafeng, WEI Jinchan, HAN Xianhong, QU Shaofei, SHI Yutong
Integration of automated roll pass design and simulation for the development of shape rolling technology
BIBA Nikolay, STEBUNOV Sergey, MALTSEV Pavel, BELUGIN Vitaliy, ALIMOV Igor
Advancing weathering steel through thermomechanical processing and simulation techniques
REFAIY Hoda, EISSA Mamdouh, MATTAR Taha, EL-SHENAWY Eman
