–
Analysis of the influence of spinning temperature on the coordinated deformation of Mg/Al composite tube
ZHENG Jinbin, SHU Xuedao, LI Zixuan, XU Haijie
download PDFAbstract. Currently, the focus of research in the realm of Mg/Al layered metal composites predominantly lies within the domain of plate structures, while the development of Mg/Al bimetallic composite tubes (BCTs), which hold significant utility, remains in its nascent exploratory phase. Among the various forming methodologies applied to BCTs, the spinning process has garnered considerable attention due to its advantageous attributes encompassing minimal forming loads, uncomplicated tooling requirements, cost-effectiveness, and high dimensional precision. This study delves into the outcomes of forming Mg/Al BCTs at diverse spinning temperatures via a synergy of theoretical frameworks and simulation experiments facilitated by the Simufact Forming software platform. A novel approach is presented for assessing the degree of coordinated deformation at the interface by scrutinizing the interface strain gradient, elucidating the intrinsic correlation between the interface strain gradient and the bonding strength at the interface. Through meticulous analysis, it is discerned that the BCTs exhibit the least interface strain gradient and axial extension disparity when subjected to a spinning temperature of 350°C. Consequently, in the context of spinning preparation for Mg/Al BCTs, a spinning temperature of approximately 350°C is recommended to engender Mg/Al BCTs characterized by enhanced harmonized deformation properties.
Keywords
Composite Tubes, Spinning Process, Simulation Analysis, Temperature, Coordinated Deformation
Published online 9/15/2024, 9 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: ZHENG Jinbin, SHU Xuedao, LI Zixuan, XU Haijie, Analysis of the influence of spinning temperature on the coordinated deformation of Mg/Al composite tube, Materials Research Proceedings, Vol. 44, pp 23-31, 2024
DOI: https://doi.org/10.21741/9781644903254-3
The article was published as article 3 of the book Metal Forming 2024
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] T. Zhang, H. Xu, Z. J. Li, Development and Present Situation of Layered Metal Composites, J. Eng. Sci. 43 (2021) 6775.
[2] X.T. Liu, T.A. Zhang, J.Z. Cui, Technology of clad metal production and its latest progress. Materials Reports 16 (2002) 41.
[3] G.M. Tian, X.M. Li, Y.Q Zhao, Research status of processing technology of laminated metal composite, Mater. China 11 (2013) 696.
[4] L. Liu, X. Chen, F. Pan, A review on electromagnetic shielding magnesium alloys, J. Magnes. Alloy. 9 (2021)16. https://doi.org/10.1016/j.jma.2021.10.001
[5] A. Meher, M. Mahapatra, P. Samal, P.R. Vundavilli, Study on effect of TiB2 reinforcement on the microstructural and mechanical properties of magnesium RZ5 alloy based metal matrix composites, J. Magnes. Alloy. 8 (2020) 780-792. https://doi.org/10.1016/j.jma.2020.04.003
[6] Y. Yang, X. Chen, J. Nie, K. Wei, Q. Mao, F. Lu, Y. Zhao, Achieving ultrastrong Magnesium-lithium alloys by low-strain rotary swaging, Mater. Res. Letter 9 (2021) 255. https://doi.org/10.1080/21663831.2021.1891150
[7] Y. Song, E.H. Han, K. Dong, D. Shan, C.D. Yim, B.S. You, Effect of hydrogen on the corrosion behavior of the Mg-xZn alloys, J. Magnes. Alloy. 2 (2014) 208-213. https://doi.org/10.1016/j.jma.2014.10.002
[8] C.C. Zhi, Z.Y. Wu, L.F. Ma, Z. Huang, Z. Zheng, H. Xv, J. Weitao, J. Lei, Effect of thickness ratio on interfacial structure and mechanical properties of Mg/Al composite plates in differential temperature asymmetrical rolling, J. Mater. Res. Technol. 24 (2023) 8332-8347. https://doi.org/10.1016/j.jmrt.2023.05.031
[9] D.C. Foley, M. Maharbi, K.T. Hartwig, I. Karaman, L.J. Kecskes, S.N. Mathaudhu, Grain refinement vs. crystallographic texture: mechanical anisotropy in a magnesium alloy, Scripta Mater. 64 (2011)193-196. https://doi.org/10.1016/j.scriptamat.2010.09.042
[10] N. Shi, WX. Wang, T.T. Zhang, Finite element simulation and analysis of staggered spinning forming of Magnesium/Aluminum composite pipe, Journal of Taiyuan University of Technology 52 (2021) 269-273.
[11] L.Q. Wang, G. Wang, J.L. Yang, AZ31 / 7475 square bimetal composite tube gas bulging-cold contraction bonding process, J. Plast. Eng. 28 (2021) 69-76.
[12] D. Zhang, G. Zhang, H. Yu, W. Lv, K. Wen, H. Xu, Controlling interfacial composition and improvement in bonding strength of compound casted Al/steel bimetal via Cr interlayer, J. Mater. Res. Technol. 23 (2023) 4385-4395. https://doi.org/10.1016/j.jmrt.2023.02.053
[13] N. Shi, Microstructure evolution and interface bonding mechanism of 6061Al/AZ3lBMg composite pipe by stagger spinning, Taiyuan University of Technology, 2020.
[14] Z.X. Li, S. Rezaei, T. Wang, Recent advances and trends in roll bonding process and bonding model: A review, Chinese Journal of Aeronautics 36 (2023) 36-74.
[15] M. Samandari, K. Abrinia, A. Akbarzadeh, Properties and Mechanism of Al/St Bimetal Tube Bonding Produced by Cold Spin-Bonding (CSB) Process, Transactions of the Indian Institute of Metals 70 (2017).
[16] J.B. Zheng, X.D. Shu, S.Y. Chen, Forming Quality Analysis of Mg-Al Composite Pipes of Multi-Pass Power Spinning, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), October 30- November 3, 2022, Columbus, Ohio, USA.
[17] M. Bambach, M. Pietryga, A. Mikloweit, A finite element framework for the evolution of bond strength in joining-by-forming processes, J. Mater. Process. Technol. 214 (2014) 2156-2168. https://doi.org/10.1016/j.jmatprotec.2014.03.015
[18] S. Guenther, G. Schwich, G. Hirt, Investigation of bond formation behaviour in composite ring rolling, J. Mater. Process. Technol. 275 (2018) 116364. https://doi.org/10.1016/j.jmatprotec.2019.116364
[19] Z. Zhang, Basic research on plastic deformation behavior of AZ31B magnesium alloy, Central South University, 2011.
