Italian Manufacturing Association Conference – XVII AITeM
Eds. Livan Fratini and Luca Settineri
Materials Research Proceedings Volume 57
Publication Date 2025, 688 pages
print ISBN 978-1-64490-372-8 (release date September 2025)
ePDF ISBN 978-1-64490-373-5
DOI: https://doi.org/10.21741/9781644903735
The book covers transformation processes of products, from production to assembly, from testing to recycling: (1) mechanical and technological characterisation of the transformed materials; (2) methodologies and tools for designing transformation systems, processes, and components; (3) programming, management and control of production, assembly, testing, and recycling systems; (4) quality management and environmental safeguard management for sustainable development.
Table of Contents
Investigation of glass-fiber reinforced polypropylene properties dependence on post-consumer recycled polypropylene content
Anna BORTOLETTO, Matteo MICHELINI, Luca GAZZOLA, Adrian L. KELLY, Ben R. WHITESIDE, Marco SORGATO, Giovanni LUCCHETTA
Impact of contour on surface quality, dimensional and geometrical accuracy of Ti48Al2Cr2Nb parts produced with powder bed fusion with electron beam process
Giovanni RIZZA, Manuela GALATI, Paolo MINETOLA, Paolo ANTONIONI, Danilo BRUSON, Giovanni MARCHIANDI, Luca IULIANO
A synergistic integration of photogrammetry and Gaussian Splatting for back-in-time quality inspection
Mattia TROMBINI, Domenico A. MAISANO, Fiorenzo FRANCESCHINI
Preliminary experimental results on a multidimensional model for cognitive assistance systems in manufacturing
BARTOLOMEI Mirco, BARRAVECCHIA Federico, REA Maria, MASTROGIACOMO Luca, CANNIZZARO Davide, FRANCESCHINI Fiorenzo
Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam
Silvio DEFANTI, Simone DE GIORGI, Giovanni RIZZA, Giulia COLOMBINI, Emanuele TOGNOLI, Ahmet Ayberk Gürbüz, Lucia DENTI, Manuela Galati, Luca Iuliano
Real-time mental workload assessment with low intrusiveness for assembly processes: Limits and preliminary results
Riccardo GERVASI, Matteo DE MARCHI, Luca MASTROGIACOMO, Dominik T. MATT, Fiorenzo FRANCESCHINI
Effect of cast extrusion parameters on the surface properties of films made of polyethylene blends with olefinic ionomers
Annalisa GENOVESI, Alessandra CAGGIANO, Massimiliano BARLETTA
Impact of surface determination techniques on dimensional and geometrical metrology using X-ray computed tomography
Federico PIRILLO, Huan SHAO, Stefano PETRÒ, Giovanni MORONI
Advanced active thermography for weld joint inspection
Valentino RAZZA, Manuela DE MADDIS, Pasquale RUSSO SPENA, Luca SANTORO
Document-type classification errors in bibliometric databases: Insights from the engineering/manufacturing field
Domenico Augusto MAISANO, Lucrezia FERRARA, Fiorenzo FRANCESCHINI
The effect of additive manufacturing-induced anisotropy on tool wear when machining martensitic nitinol
Flavia Tucci, Rachele Bertolini, Andrea Ghiotti, Stefania Bruschi
Effect of process parameters on AlCoCr2FeMo0.5Ni high-entropy alloy coatings produced using laser directed energy deposition
Chiara GIANASSI, Erica LIVERANI, Alessandro ASCARI, Alessandro FORTUNATO
Instrumented indentation tests for local temperature-dependent mechanical properties assessment of laser-based powder bed fusion of aluminium alloy
Stefano GUARINO, Gennaro Salvatore PONTICELLI, Alfio SCUDERI, Simone VENETTACCI, Vittorio VILLANI
Optimizing 3D printing process parameters for high-performance inflatable soft actuators
RIFINO Rosanna, PRICCI Alessio, PERCOCO Gianluca
Understanding powder transport mechanisms in directed energy deposition via design of experiments
Adriano Nicola PILAGATTI, Eleonora ATZENI, Alessandro SALMI, Luca IULIANO
Physics-based model for dot geometry prediction in dot-by-dot wire arc additive manufacturing
Niccolò GROSSI, Guido PIERATTINI, Riccardo LILLI, Antonio SCIPPA
Design and preliminary testing of innovative tooling system elements obtained by L-PBF process for effective suppression of chatter vibrations
SCALZO Federico, TOTIS Giovanni, VAGLIO Emanuele, ANTONIALLI Armando Ítalo Sette, SORTINO Marco
A preliminary study about high-pressure homogenization as a viable alternative to produce powder feedstock for selective laser sintering of biopolymers
Alberto GIUBILINI, Giovanna COLUCCI, Manuela GALATI, Giovanni MARCHIANDI, Massimo MESSORI, Luca IULIANO, Paolo MINETOLA
In-situ monitoring of laser powder bed fusion on multi-material substrates for electric mobility
Marco Grasso, Matteo Bugatti, Frank Sarfert, Aitor Echaniz, Bianca Maria Colosimo
FFF of PLA reinforced with flax: Effects of the infill strategy on low-velocity impact behavior and the energy consumption
Ersilia COZZOLINO, Ilaria PAPA, Antonello ASTARITA, Valentina LOPRESTO
Silicone 3D printing: Experimental validation of a reduced-order numerical model for optimal layer deposition
PRICCI Alessio, PERCOCO Gianluca
Optimization of process parameters for fused filament fabrication of ULTEM 1010
VAGLIO Emanuele, BILLÈ Erica, GAMBITTA Alessandro, RONDINELLA Alfredo, TOTIS Giovanni, SCALZO Federico, SORTINO Marco
Impact of cell dimensions and beam radius on the bending characteristics of BCC sandwich panels produced via L-PBF of Ti6Al4V
Dina PALMERI, Gaetano POLLARA, Gianluca BUFFA, Livan FRATINI
Effect of cyclic loading and thermal stimuli on the shape memory behavior of PLA 3D-printed cellular structures
Desole M.P., Gisario A.
From design to reality: Improving multimaterial powder bed fusion laser melting additive manufacturing via in-situ monitoring
Stefania Cacace, Matteo Bugatti, Bianca Maria Colosimo
Process capability investigation on the 3D printing technique for hybrid silica-based sands cores
Mukul Ramesh Kumar, Stefania Cacace, Maurizio Chiesa, Daniele Chiesa, Paolo Parenti
Preliminary study on evaluation of printing parameters for a MEX repair application
Raniero PIRLO, Marco LAFIRENZA, Maria Grazia GUERRA, Fulvio LAVECCHIA, Luigi Maria GALANTUCCI
Experimental characterization of QP1180 steel and its performance in stamping simulation: Comparison with DP1180
Maria Emanuela Palmieri, Matteo Villa, Michele Abruzzo, Giuseppe Macoretta, Stefania Bruschi, Luigi Tricarico
Textured tools and cryogenic cooling for modifying chip morphology in PEEK machining
Anna Bottin, Rachele Bertolini, Stefania Bruschi
Comparison between the mechanical properties and environmental sustainability of basalt and carbon fiber reinforced polymers hoop filament wound components
Iacopo BIANCHI, Massimo DI PIETRO, Archimede FORCELLESE, Francesco GALLIANI, Tommaso MANCIA, Chiara MIGNANELLI, Michela SIMONCINI, Tommaso VERDINI
Effect of heat shrinkable tape layer number on mechanical properties and quality of tubular CFRP components obtained by filament winding
Marina ANDREOZZI, Iacopo BIANCHI, Archimede FORCELLESE, Chiara MIGNANELLI, Massimiliano PIERALISI, Michela SIMONCINI, Tommaso VERDINI
Comparative study of autoclave thermoforming and hot-press moulding for manufacturing green composite parts
G. Parodo, L. Sorrentino, S. Turchetta
Laser texturing of 3D Copper current collector for ultrafast Zinc metal plating
Vincenzina SICILIANI, Nassima YAMINI, Riccardo PELACCIA, Andrea PAOLELLA, Leonardo ORAZI
Study of printing parameters on part performance in foamy TPU using material extrusion technology
Francesco de PALMA, Alessandro PELLEGRINI, Roberto SPINA, Fulvio LAVECCHIA
Enhancing the robustness of nanostructures through the production of self-protective structures by injection molding of thermoplastic elastomers
Giacomo BARUFFA, Keltoum OUBELLAOUCH, Giulia ZANIBONI, Giovanni LUCCHETTA, Marco SORGATO
Physical foaming of 25% post-industrial recycled TPU using the supercritical foaming technology
Francesco MACIARIELLO, Giovanni LUCCHETTA, Marco SORGATO
Numerical modeling of high-speed laser cutting of copper current collectors
Samuele Piandoro, Caterina Angeloni, Alessandro Fortunato, Erica Liverani, Alessandro Ascari
Friction stir welding of AA6082 and AA5083 T-joints for naval applications: Finite element modeling and experimental analysis of material flow
Guido Di Bella, Mohamed Chairi, Davide Campanella, Riccardo Puleo, Gianluca Buffa
Switching supervisory control in fusion laser cutting with vision-based process state detection
CAPRIO Leonardo, GUERRA Sofia, PACHER Matteo, GANDOLFI Davide, SAVARESI Sergio Matteo, TANELLI Mara, PREVITALI Barbara
Peripheral coarse grain prediction in extruded AA6082: Combining finite element simulations with neural networks
Marco Negozio, Adrian H.A. Lutey, Antonio Segatori, Riccardo Pelaccia, Sara Di Donato, Barbara Reggiani, Lorenzo Donati
Investigating the tube production via friction stir extrusion of aluminum chips
Riccardo PULEO, Muhamad ADNAN, Giuseppe INGARAO, Gianluca BUFFA, Livan FRATINI
Identification of tool tip frequency response function through surface location error
Lorenzo MORELLI, Niccolò GROSSI, Antonio Scippa
An AI-based approach for flow front monitoring and prediction in liquid composite molding processes based on dielectric and visual data elaboration
Vitantonio ESPERTO, Fausto TUCCI, Felice RUBINO, Pierpaolo CARLONE
Modeling of molten pool geometry and remelting layer in the laser ablation of Ti6Al4V alloy
Maria Rosaria SAFFIOTI, Serafino CARUSO, Giovanna ROTELLA, Domenico UMBRELLO
Surface Integrity study in cryogenic milling of Ti-6Al-4V titanium alloy
Paolo Albertelli, Michele Monno
Resin molds to improve thermal energy consumption in injection molding process
Giulia ZANIBONI, Riccardo PELACCIA, Leonardo ORAZI, Rossella SURACE, Giovanna ROTELLA, Vito BASILE
A value-driven approach to printed circuit board inspection: Strategic use of inspection technologies to reduce waste
Stefano PUTTERO, Elisa VERNA, Gianfranco GENTA, Maurizio GALETTO
Exploring multi-human multi-robot collaboration in assembly processes: Challenges and opportunities in quality and manufacturing
Matteo CAPPONI, Aurora Sofia DI MATTEO, Luca MASTROGIACOMO
Reuse of 316L stainless steel towards zero-waste laser powder bed fusion
Gabriele LOCATELLI, Sara BOCCHI, Mariangela QUARTO, Gianluca D’URSO
Welding and wire arc additive manufacturing using FSE solid-state recycled wires: Challenges and future perspectives
Gustavo H.S.F.L. CARVALHO, Gianni CAMPATELLI, Gianluca BUFFA
Optimization of manufacturing processes for PS-paper powder compounds in sustainable foodservice plates
Arif Enes KARACA, Alessandra CAGGIANO, Massimiliano BARLETTA
Towards the wire-feed friction stir extrusion-based additive manufacturing of aluminum alloys
Kirill KALASHNIKOV, Davide CAMPANELLA, Muhammad ADNAN, Rosa DI LORENZO, Giuseppe INGARAO, Gianluca BUFFA, Livan FRATINI
Development of low environmental impact technological solutions based on PLA, PBS, PBAT and Talc blends for multilayer food packaging manufacturing
Marzio MILO DI VILLAGRAZIA, Alessandra CAGGIANO, Annalisa GENOVESI, Massimiliano BARLETTA
Reciprocal human–machine learning flow modelling for assisted assembly systems
Yuchen FAN, Alessandro SIMEONE, Dario ANTONELLI
Environmental impact assessment of adhesive joints in basalt fibre-reinforced thermoplastic composites using LCA methodology
Luigi BENVENUTO, Chiara MANDOLFINO, Pietro RUSSO, Matteo BENVENUTO, Marco PIZZORNI, Enrico LERTORA
A decisional framework for second-life applications of textile waste: A data-driven and generative AI approach
Giovanni DE MARTINO, Rosa LEONE, Marica BUCCI, Michele DASSISTI
Thermal and Joule effect debonding techniques: Evaluation of mechanical strength and LCA analysis of bonded joints
Matteo Benvenuto, Enrico Lertora, Marco Pizzorni, Luigi Benvenuto, Alessia Lusiani, Chiara Mandolfino
Fostering sustainability-oriented product innovation: A comprehensive framework to support product development for a circular economy
Luigi PANZA, Giulia BRUNO, Paolo CHIABERT
Implementing Job Sequencing in a CONWIP fully automated assembly line
Arianna ALFIERI, Claudio CASTIGLIONE, Erica PASTORE
Integrating buffer “stock” and buffer loops in an assembly line with conveyors: An automotive case study
Claudio CASTIGLIONE, Erica PASTORE, Arianna ALFIERI
Metaheuristic approaches for solving the scheduling problem in the semiconductor diffusion work area
Roberto Rosario CORSINI, Antonio COSTA, Valeria FICHERA, Giuseppe ORITI, Daniele PAGANO
A mathematical modeling approach for job allocation at STMicroelectronics
EL ACHKAR Elias, FRIGERIO Nicla, PAGANO Daniele, MATTA Andrea
Digitalization of broaching processes: a scalable approach to industry 4.0 in small and medium enterprises
Michele ABRUZZO, Gino DINI, Gualtiero FANTONI, Luca ROMOLI, Marko VUKOVIC
Digital twin solutions for state-aware, dynamic task allocation in flexible cyber-physical production systems
Matteo DE MARCHI, Erwin RAUCH, Dominik T. MATT
Field-driven design of functionally graded TPMS-based 3D printed sandwich structures: Modeling, printing and testing
Gabriele Marabello, Guido Di Bella
Deep learning-based monitoring of laser beam direct energy deposition to detect deviations in process conditions
M. Mazzarisi, M.G. Guerra, A. Angelastro, L.M. Galantucci, S.L. Campanelli
Nanoscale topographical characterization of permeability-related features in the production of polymeric films for food packaging
Giacomo MACULOTTI, Alberto PIOVANO, Gianfranco GENTA, Maurizio GALETTO
Design optimization and one-shot 3D printing of a bio-inspired soft robot capable of counter-flexural motion at low actuation pressures
Luca DI LEO, Alessio PRICCI, Andrea GRAVILI, Gianluca PERCOCO
Fabrication of shape memory composites for non-explosive release mechanisms in space applications
Denise BELLISARIO, Leandro IORIO, Dounia NOQRA, Giorgio PARTIZII, Alice PROIETTI, Fabrizio QUADRINI, Loredana SANTO
Towards efficient defect detection in injection molding with transformer models
Andrea PIERESSA, Marco SORGATO, Giovanni LUCCHETTA
Supervised autoencoder for fault detection and diagnosis in predictive maintenance of bearing ring grinding machine
Pietro Andrea MICIACCIA, Giovanni PASCOSCHI, Antonio DECATALDO, Domenico MONOPOLI, Concetta SEMERARO, Michele DASSISTI
An experimental approach exploiting high-voltage fragmentation as a selective comminution technology for the recovery of key metals
Marco DIANI, Shravan TORVI, Marcello COLLEDANI
An automatic system of handling and heating samples during dynamic hot compression tests
G. Soardi, C. Guerra, M. Seiti, A. Abeni, A. Attanasio, E. Ceretti
A technological analysis and prototype design for efficient and flexible stacking processes
Sen BAI, Nicla FRIGERIO, Daniela FONTANA, Andrea MATTA
Development of a repair strategy for a thin aerospace component with dot-by-dot deposition approach
Gianni CAMPATELLI, Gustavo H.S.F.L. CARVALHO, Paolo C. PRIARONE
Manufacturing quotation platform for turned parts: The PLAT4M project
Antonio SCIPPA, Niccolò GROSSI
Preliminary numerical and experimental investigation of clamping effects on one-up drilling of stacked aluminium aerospace components
Martina Panico, Massimo Durante, Antonio Langella, Luca Boccarusso
Manufacturing of vitrimer matrix composite substrates for cold-spray coatings
Fausto TUCCI, Barbara PALMIERI, Alessia Serena PERNA, Antonio VISCUSI, Alfonso MARTONE, Antonello ASTARITA
