Effect of cyclic loading and thermal stimuli on the shape memory behavior of PLA 3D-printed cellular structures
Desole M.P., Gisario A.
Abstract. This study investigates the shape memory behaviour of PLA 3D printed cellular structures subjected to bending cycles. The focus is on their ability to recover the original shape following the application of a thermal stimulus. Both water and hot air were tested as activation media, with the structures subjected to three alternating cycles of stress and recovery to evaluate their performance. Two structural designs were considered: a topology with negative stiffness, modified to enhance performance and a structure inspired by the spring-loaded crossbow. The latter proved to be more effective, standing out for its mechanical strength and energy absorption capacity. The type of thermal stimulus significantly influences the recovery of the original shape. Specifically, the use of hot air enables localized recovery of the structure, reducing damage to the geometry as a result of cyclic stresses and increasing the energy absorption properties of the structure.
Keywords
Additive Manufacturing, Shape Memory Polymers, Energy Absorption
Published online 9/10/2025, 8 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Desole M.P., Gisario A., Effect of cyclic loading and thermal stimuli on the shape memory behavior of PLA 3D-printed cellular structures, Materials Research Proceedings, Vol. 57, pp 208-215, 2025
DOI: https://doi.org/10.21741/9781644903735-24
The article was published as article 24 of the book Italian Manufacturing Association Conference
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] B. Ch. Kholkhoev et al., «4D-printing of mechanically durable high-temperature shape memory polymer with good irradiation resistance», Applied Materials Today, vol. 36, p. 102022, feb. 2024. https://doi.org/10.1016/j.apmt.2023.102022
[2] G. Dixit e P. M. Pandey, «Experimental investigations of temperature-sensitive shape memory polymer composites for 4D printing», Journal of Thermoplastic Composite Materials, vol. 38, fasc. 2, pp. 537–563, feb. 2025. https://doi.org/10.1177/08927057241254322
[3] W. Xu, Z. Ping, X. Gong, F. Xie, Y. Liu, e J. Leng, «Self-Healing Polymers Coupling Shape Memory Effect», Langmuir, vol. 40, fasc. 31, pp. 15957–15968, ago. 2024. https://doi.org/10.1021/acs.langmuir.4c01369
[4] J. Ukwaththa, S. Herath, e D. P. P. Meddage, «A review of machine learning (ML) and explainable artificial intelligence (XAI) methods in additive manufacturing (3D Printing)», Materials Today Communications, vol. 41, p. 110294, dic. 2024. https://doi.org/10.1016/j.mtcomm.2024.110294
[5] G. Ehrmann e A. Ehrmann, «3D printing of shape memory polymers», Journal of Applied Polymer Science, vol. 138, fasc. 34, p. 50847, 2021
[6] A. Sadraei e S. M. Naghib, «4D printing of physical stimuli-responsive hydrogels for localized drug delivery and tissue engineering», Polymer Reviews, vol. 65, fasc. 1, pp. 104–168, 2025.
[7] E. Rezvani Ghomi et al., «The life cycle assessment for polylactic acid (PLA) to make it a low- carbon material», Polymers, vol. 13, fasc. 11, p. 1854, 2021.
[8] J. Wu, W. Wang, e X. Gao, «Design and optimization of conforming lattice structures», IEEE transactions on visualization and computer graphics, vol. 27, fasc. 1, pp. 43–56, 2019.
[9] W. Tao e M. C. Leu, «Design of lattice structure for additive manufacturing», presentato al 2016 International Symposium on Flexible Automation (ISFA), IEEE, 2016, pp. 325–332.
[10]M. Munford, U. Hossain, S. Ghouse, e J. R. T. Jeffers, «Prediction of anisotropic mechanical properties for lattice structures», Additive Manufacturing, vol. 32, p. 101041, mar. 2020. https://doi.org/10.1016/j.addma.2020.101041
[11]H. Yin, W. Zhang, L. Zhu, F. Meng, J. Liu, e G. Wen, «Review on lattice structures for energy absorption properties», Composite Structures, vol. 304, p. 116397, gen. 2023. https://doi.org/10.1016/j.compstruct.2022.116397
[12]P. Xu et al., «Compression behavior of 4D printed metamaterials with various Poisson’s ratios», International Journal of Mechanical Sciences, vol. 264, p. 108819, feb. 2024. https://doi.org/10.1016/j.ijmecsci.2023.108819
[13]Y. Chen, L. Ye, Y. X. Zhang, e K. Fu, «Compression behaviours of 3D-printed CF/PA metamaterials: Experiment and modelling», International Journal of Mechanical Sciences, vol. 206, p. 106634, set. 2021. https://doi.org/10.1016/j.ijmecsci.2021.106634
[14]K. K. Dudek, W. Wolak, R. Gatt, e J. N. Grima, «Impact resistance of composite magnetic metamaterials», Scientific Reports, vol. 9, fasc. 1, p. 3963, mar. 2019. https://doi.org/10.1038/s41598-019- 40610-w
[15]L. Meng et al., «Impact resisting mechanism of tension–torsion coupling metamaterials», International Journal of Mechanical Sciences, vol. 272, p. 109100, giu. 2024. https://doi.org/10.1016/j.ijmecsci.2024.109100
[16]N. Korshunova et al., «Bending behavior of octet-truss lattice structures: Modelling options, numerical characterization and experimental validation», Materials & Design, vol. 205, p. 109693, lug. 2021. https://doi.org/10.1016/j.matdes.2021.109693
[17]H. Jiang, H. Ziegler, Z. Zhang, S. Atre, e Y. Chen, «Bending behavior of 3D printed mechanically robust tubular lattice metamaterials», Additive Manufacturing, vol. 50, p. 102565, feb. 2022. https://doi.org/10.1016/j.addma.2021.102565
[18]D. Koske e A. Ehrmann, «Infill designs for 3D-printed shape-memory objects», Technologies, vol. 9, fasc. 2, p. 29, 2021.
[19]B. B. Samal, A. Jena, S. K. Varshney, e C. S. Kumar, «FDM 4D printing: A low-cost approach of shape programming and assessing the shape memory properties using angle measurement methods in hot water actuation testing apparatus», Materials Today: Proceedings, vol. 101, pp. 7–14, gen. 2024. https://doi.org/10.1016/j.matpr.2023.02.038
[20]J. Wu et al., «Multi-shape active composites by 3D printing of digital shape memory polymers», Scientific Reports, vol. 6, fasc. 1, p. 24224, apr. 2016. https://doi.org/10.1038/srep24224.
[21]A. Gisario, M. P. Desole, M. Mehrpouya, e M. Barletta, «Energy absorbing 4D printed meta- sandwich structures: load cycles and shape recovery», The International Journal of Advanced Manufacturing Technology, vol. 127, fasc. 3, pp. 1779–1795, 2023.
[22]Y. Wang et al., «Photoresponsive triple shape memory polymers with a self-healing function based on poly (lactic acid)/polycaprolactone blends», Polymer Testing, vol. 120, p. 107966, mar. 2023. https://doi.org/10.1016/j.polymertesting.2023.107966
[23]D. Koske e A. Ehrmann, «Advanced infill designs for 3d printed shape-memory components», Micromachines, vol. 12, fasc. 10, p. 1225, 2021.
[24]J. Jancirani e H. Assarudeen, «A review on structural analysis and experimental investigation of fiber reinforced composite leaf spring», Journal of Reinforced Plastics and Composites, vol. 34, fasc. 2, pp. 95–100, gen. 2015. https://doi.org/10.1177/0731684414564477
[25]Q. Zhao, H. J. Qi, e T. Xie, «Recent progress in shape memory polymer: New behavior, enabling materials, and mechanistic understanding», Progress in Polymer Science, vol. 49–50, pp. 79–120, ott. 2015. https://doi.org/10.1016/j.progpolymsci.2015.04.001
[26]Y. Wu, Y. Han, Z. Wei, Y. Xie, J. Yin, e J. Qian, «4D Printing of Chiral Mechanical Metamaterials with Modular Programmability using Shape Memory Polymer», Advanced Functional Materials, vol. 33, fasc. 52, p. 2306442, 2023. https://doi.org/10.1002/adfm.202306442
[27]A. Rajput, M. R. Sunny, e A. Sarkar, «Optimization of honeycomb parameters of sandwich composites for energy and specific energy absorption using particle swarm optimization», Marine Structures, vol. 92, p. 103498, nov. 2023. https://doi.org/10.1016/j.marstruc.2023.103498
[28]Y. Ji, Z. Gao, W. Chen, H. Huang, M. Li, e X. Li, «Study on the deformation mode and energy absorption characteristics of a corner-enhanced biomimetic spider web hierarchical structure», Thin- Walled Structures, vol. 199, p. 111810, giu. 2024. https://doi.org/10.1016/j.tws.2024.111810
