Aeronautics and Astronautics
AIDAA XXVII International Congress
Eds. Sergio De Rosa, Marco Petrolo, Mirco Zaccariotto
Materials Research Proceedings Volume 37
Publication Date 2023, 786 Pages
print ISBN 9781644902806 (release date December 2023)
ePDF ISBN 9781644902813
DOI: 10.21741/9781644902813
These conference proceedings present 165 papers in all scientific and aerospace engineering fields, including materials and structures, aerodynamics and fluid dynamics, propulsion, aerospace systems, flight mechanics and control, space systems, and missions.
Table of Contents
Aeroacoustic assessment of blended wing body configuration with low noise technologies
Francesco P. Adamo, Mattia Barbarino et al.
Leonardo I4N research program – design of novel acoustic liners for aero engine nacelles
Giuseppe Dilillo, Paul Murray, Nicola Gravagnone, Massimiliano Di Giulio
Aeroacustics computation based on harmonic balance solution
Luca Abergo, Alberto Guardone
Experimental investigation of the noise emitted by two different propellers ingesting a planar boundary layer
Michele Falsi, Ismaeel Zaman, Matteo Mancinelli, Stefano Meloni, Roberto Camussi, Bin Zang, Mahdi Azarpeyvand
Predicting noise spectrum of a small drone rotor in a confined environment: a lattice Boltzmann Vles analysis
Riccardo Colombo, Lorenzo Maria Pii, Gianluca Romani, Maurizio Boffadossi
On the influence of airframe flexibility on rotorcraft pilot couplings
Carmen Talamo, Andrea Zanoni, Davide Marchesoli, Pierangelo Masarati
Tiltrotor whirl-flutter stability analysis using the maximum Lyapunov characteristic exponent estimated from time series
Gianni Cassoni, Alessandro Cocco, Aykut Tamer, Andrea Zanoni, Pierangelo Masarati
Wind tunnel flutter tests of a strut-braced high aspect ratio wing
Luca Marchetti, Stephan Adden, Michael Meheut, Sergio Ricci
New insights on limit cycle oscillations due to control surface freeplay
Nicola Fonzi, Sergio Ricci, Eli Livne
Aeroelastic design and optimization of strut-braced high aspect ratio wings
Toffol Francesco, Sergio Ricci
Ten years of aero-servo-elastic tests at large POLIMI’s wind tunnel for active flutter control and loads alleviation
Sergio Ricci
Studies in hydrogen micromix combustor technologies for aircraft applications
Ainslie D. French, Giuseppe Mingione, Antonio Schettino, Luigi Cutrone, Pietro Roncioni
Performance assessment of low-by-pass turbofan engines for low-boom civil supersonic aircraft
Francesco Piccionello, Grazia Piccirillo , Nicole Viola
Numerical and experimental studies on BLI propulsor architectures
A. Battiston, A. Magrini, R. Ponza, E. Benini, J. Alderman
Neural networks for the identification of degraded components of aircraft fuel quantity system
Rosario Arcuri, Roberta Masciullo, Roberto Bertola
Hardware-in-the-loop validation of a sense and avoid system leveraging data fusion between radar and optical sensors for a mini UAV
Marco Fiorio, Roberto Galatolo, Gianpietro Di Rito
A parametric model for thermal management system for more electric and hybrid aircraft
Sofia Caggese, Marco Fioriti, Flavio Di Fede
Preliminary design of an electromechanical actuator for eVTOL aircrafts in an urban air mobility context
Roberto Guida, Antonio Carlo Bertolino, Andrea De Martin, Giovanni Jacazio, Massimo Sorli
Landing gear shock absorbers guidelines
Michele Guida, Giovanni Marulo, Francesco Marulo
Experiments and simulations for the development of a dual-stator PMSM for lightweight fixed-wing UAV propulsion
Aleksander Suti, Gianpietro Di Rito, Roberto Galatolo, Luca Sani, Giuseppe Mattei
Target localization with a distributed Kalman filter over a network of UAVs
Salvatore Bassolillo, Egidio D’Amato, Massimiliano Mattei, Immacolata Notaro
Integration in controlled airspace: definition and validation of link loss contingency procedures for RPAS in terminal manoeuvring areas
G. D’Angelo, G. Pompei, A. Manzo, G. Riccardi, U. Ciniglio
Hybrid graph-clothoid based path planning for a fixed wing aircraft
Luciano Blasi, Egidio D’Amato, Immacolata Notaro, Gennaro Raspaolo
Navigation services from large constellations in low earth orbit
Giovanni B. Palmerini, Prakriti Kapilavai
A tool for risk assessment after a catastrophic event during suborbital flight operations
Giulio Avanzini, Giovanni Curiazio, Lorenzo Vampo
Cruising by air and sea: brief history, status and outlook for a submersible aircraft
Sergio De Rosa, Marco Cinque, Giuseppe Petrone, Leonardo Lecce
Low-boom supersonic business jet: aerodynamic analysis and mission simulation towards a CO2 emission standard
Giacomo Richiardi, Samuele Graziani, Oscar Gori, Nicole Viola
Effects of different drag laws on ice crystals impingement on probes mounted on a fuselage
A. Carozza, P.L. Vitagliano, G. Mingione
Morphing technology for gust alleviation: an UAS application
Fernando Montano, Vincenzo Gulizzi, Ivano Benedetti
Multidisciplinary design, analysis and optimization of fixed-wing airborne wind energy systems
Filippo Trevisi, Alessandro Croce, Carlo Emanuele Dionigi Riboldi
Refinement of structural theories for composite shells through convolutional neural networks
Marco Petrolo, Pierluigi Iannotti, Mattia Trombini, Mattia Melis
Decision trees-based methods for the identification of damages in strongly damped plates for aerospace applications
Alessandro Casaburo, Cyril Zwick, Pascal Fossat, Mohsen Ardabilian, Olivier Bareille, Franck Sosson
SHM implementation on a RPV airplane model based on machine learning for impact detection
G. Scarselli, F. Dipietrangelo, F. Nicassio
Assessment and optimization of dynamic stall semi-empirical model for pitching aerofoils
Enrico Galli, Gregorio Frassoldati, Davide Prederi, Giuseppe Quaranta
Pattern recognition of the flow around a pitching NACA 0012 airfoil in dynamic stall conditions
Giacomo Baldan, Alberto Guardone
RANS transition model predictions on hypersonic three-dimensional forebody configuration
Luigi Cutrone, Antonio Schettino
A finite-volume hybrid WENO/central-difference shock capturing approach with detailed state-to-state kinetics for high-enthalpy flows
Francesco Bonelli, Davide Ninni, Gianpiero Colonna, Giuseppe Pascazio
Quantum computing CFD simulations: state of the art
Giulio Malinverno, Javier Blasco Alberto, Jon Lecumberri SanMartin
Analysis of plasma formation during hypersonic flight in the earth atmosphere
Salvatore Esposito, Domenic D’ Ambrosio
Multi-step ice accretion on complex three-dimensional geometries
Alessandro Donizetti, Tommaso Bellosta, Mariachiara Gallia, Andrea Rausa, Alberto Guardone
Large Eddy simulations and Reynolds-averaged Navier-Stokes simulations of separation-induced transition using an unstructured finite volume solver
Manuel Carreño Ruiz, Domenic D’Ambrosio
High-fidelity simulation of the interaction between the wake of a descent capsule and a supersonic parachute
Luca Placco, Giulio Soldati, Alessio Aboudan, Francesca Ferri, Matteo Bernardini, Federico Dalla Barba, Francesco Picano
Impact of a wedge in water: assessment of the modeling keyword, presence of cavitation and choice of the filter most suitable for the case study
D. Guagliardo, E. Cestino, G. Nicolosi, E. Guarino, A. Virdis, A. Alfero, D. Pittalis, M.L. Sabella
Thermal fluid-structure interaction by discontinuous Galerkin methods
Vincenzo Gulizzi
Conjugate heat transfer applied to transitory analysis for rocket engine cooling systems design
Vincenzo Barbato, Matteo Fiore, Francesco Nasuti
Assessment of aerodynamics of low Martian atmosphere within the CIRA program TEDS
Francesco Antonio D’Aniello, Pietro Catalano, Nunzia Favaloro
A combustion-driven facility to study phenomenologies related to hypersonic sustained flight
Antonio Esposito
Development of a DNS solver for compressible flows in generalized curvilinear coordinates
Giulio Soldati, Alessandro Ceci, Sergio Pirozzoli
Numerical tank self-pressurization analyses in reduced gravity conditions
Francesca Rossetti, Marco Pizzarelli, Rocco Pellegrini, Enrico Cavallini, Matteo Bernardini
Aerodynamic analysis of a high-speed aircraft from hypersonic down to subsonic speeds
Giuseppe Pezzella, Antonio Viviani
Virtual testing application to ESA micro vibrations measurement system
Lorenzo Dozio, Leonardo Peri, Michele Pagano, Pietro Nali
Nonlinear transient analyses of composite and sandwich structures via high-fidelity beam models
Matteo Filippi, Rodolfo Azzara, Erasmo Carrera
BEA: Overview of a multi-unmanned vehicle system for diver assistance
Leonardo Barilaro, Jason Gauci, Marlon Galea, Andrea Filippozzi, David Vella, Robert Camilleri
Requirements definition in support of digital twin platform development
Castrese Di Marino, Valeria Vercella, Rocco Gentile, Giacomo Nasi, Stefano Centomo
Coupling effect of acoustic resonators for low-frequency sound suppression
G. Catapane, L.M. Cardone, G. Petrone, O. Robin, F. Franco
New UAV ice tunnel characterization
Arrigo Avi, Giuseppe Quaranta, Riccardo Parin
Remote sensing validation with in-situ measurements for efficient crop irrigation management
I. Terlizzi, F. Morbidini, C. Maucieri, C. Bettanini, G. Colombatti, S. Chiodini, F. Toson, M. Borin
DUST mitigation technology for lunar exploration and colonization: existing and future perspectives
Guido Saccone, Nunzia Favaloro
A static, refractive and monolithic Fourier spectrometer for an HEMERA balloon flight
Fabio Frassettoa, Lorenzo Cocolab, Paola Zuppella, Vania Da Deppo, Riccardo Claudi, Luca Poletto
Ascent trajectory of sounding balloons: dynamical models and mission data reconstruction
C. Bettanini, M. Bartolomei, A. Aboudan, L. Olivieri
Italian space agency space transportation activities and programs
Marta Albano, Rocco Carmine Pellegrini, Roberto Bertacin, Simone Ciabuschi, Simone Illiano, Rocco Maria Grillo, Enrico Cavallini
Nonlinear mechanical analysis of aerospace shell structures through the discontinuous Galerkin method
Giuliano Guarino, Alberto Milazzo
Exploring aerospace advancements and global collaborations: a comprehensive analysis of MCAST’s aerospace program in Malta
Leonardo Barilaro, Lorenzo Olivieri, Mark Wylie, Joseph Borg
Comparison of lattice core topologies in sandwich structures
G. Mantegna, C.R. Vindigni, D. Tumino, C. Orlando, A. Alaimo
Thermal buckling analysis and optimization of VAT structures via layer-wise models
A. Pagani, E. Zappino, R. Masia, F. Bracaglia, E. Carrera
Surface node method for the peridynamic simulation of elastodynamic problems with Neumann boundary conditions
Francesco Scabbia, Mirco Zaccariotto, Ugo Galvanetto
Crack localization on a statically deflected beam by high-resolution photos
Andrea Vincenzo De Nunzio, Giada Faraco
Adaptive finite elements based on Carrera unified formulation for meshes with arbitrary polygons
Maria Cinefra, Andrea Rubino
Analysis of the manufacturing signature on AFP-manufactures variable stiffness composite panels
Alfonso Pagani, Alberto Racionero Sánchez-Majano
An analytical tool for studying the impact of process parameters on the mechanical response of composites
E. Zappino, M. Petrolo, R. Masia, M. Santori, N. Zobeiry
Acoustic characteristics evaluation of an innovative metamaterial obtained through 3D printing technique
L.M. Cardone, S. De Rosa, G. Petrone, G. Catapane, A. Squillace, L. Landolfi, A.L.H.S. Detry
Hygrothermal effects in aeronautical composite materials subjected to freeze-thaw cycling
Christian Bianchi, Pietro Aceti, Giuseppe Sala
Polymer matrices for composite materials: monitoring of manufacturing process, mechanical properties and ageing using fiber-optic sensors
Davide Airoldi, Pietro Aceti, Giuseppe Sala
An energy-based design approach in the aero-structural optimization of a morphing aileron
Alessandro De Gaspari, Vittorio Cavalieri, Nicola Fonzi
A boundary element method for thermo-elastic homogenization of polycrystals
Dario Campagna, Vincenzo Gulizzi, Alberto Milazzo, Ivano Benedetti
Flutter instability in elastic structures
Davide Bigoni, Francesco Dal Corso, Andrea Piccolroaz, Diego Misseroni, Giovanni Noselli
Can we use buckling to design adaptive composite wings?
Chiara Bisagni
Immersed boundary-conformal coupling of cylindrical IGA patches
Giuliano Guarino, Pablo Antolin, Alberto Milazzo, Annalisa Buffa
Folding simulation of TRAC longerons via unified one-dimensional finite elements
Riccardo Augello, Erasmo Carrera, Alfonso Pagani, Sergio Pellegrino
Numerical-analytical evaluation about the impact in water of an elastic wedge using the SPH method
D. Guagliardo, E. Cestino, G. Nicolosi
Data-driven deep neural network for structural damage detection in composite solar arrays on flexible spacecraft
Federica Angeletti, Paolo Gasbarri, Marco Sabatini
A numerical parametric study on delamination influence on the fatigue behaviour of stiffened composite components
Angela Russo, Andrea Sellitto, Concetta Palumbo, Rossana Castaldo, Aniello Riccio
On the use of double-double design philosophy in the redesign of composite fuselage barrel components
Antonio Garofano, Andrea Sellitto, Aniello Riccio
Multifunctional composites as Solid-Polymer-Electrolytes (SPE) for Lithium Ion Battery (LIB)
Salvatore Mallardo, Gennaro di Mauro, Michele Guida, Pietro Russo, Gabriella Santagata, Rosa Turco
Virtual element method for damage modelling of two-dimensional metallic lattice materials
Marco Lo Cascio, Ivano Benedetti, Alberto Milazzo
A meso-scale model of progressive damage and failure in LSI-produced ceramic matrix composites for aerospace applications
A. Airoldi, M. Riva, E. Novembre, A.M. Caporale, G. Sala, M. De Stefano Fumo, L. Cavalli
A peridynamics elastoplastic model with isotropic and kinematic hardening for static problems
Mirco Zaccariotto, Atefeh Pirzadeh, Federico Dalla Barba, Lorenzo Sanavia, Florin Bobaru, Ugo Galvanetto
Structural batteries challenges for emerging technologies in aviation
Gennaro Di Mauro, Michele Guida, Gerardo Olivares, Luis Manuel Gomez
Dynamic buckling structural test of a CFRP passenger floor stanchion
Gennaro Di Mauro, Michele Guida, Fabrizio Ricci, Leandro Maio
Deep learning algorithms for delamination identification on composites panels by wave propagation signals analysis
Ernesto Monaco, Fabrizio Ricci
Deployment of a CubeSat radiative surface through an autonomous torsional SMA actuator
Filippo Carnier, Alberto Riccardo Donati, Elena Villa, Daniela Rigamonti, Paolo Bettini
Development of an FBG-based hinge moment measuring system for wind tunnel testing
A. Taraborrelli, A. Gurioli, P. De Fidelibus, E. Casciaro, M. Boffadossi, P. Bettini
Buckling and post-buckling response of curved, composite, stiffened panels under combined loads including pressurization
Luisa Boni, Daniele Fanteria, Tommaso Lucchesi
Insights on state of the art and perspectives of XR for human machine interfaces in advanced air mobility and urban air mobility
Sandhya Santhosh, Francesca DeCrescenzio, Millene Gomes Araujo, Marzia Corsi, Sara Bagassi, Fabrizio Lamberti, Filippo Gabriele Pratticò, Domenico Accardo, Claudia Conte, Francesco De Nola, Marco Bazzani, Joyce Adriano Losi
Electric conversion of a general aviation aircraft: a case study
Sergio Bagarello, Ivano Benedetti
Aerodynamic design of advanced rear end for large passenger aircraft
Salvatore Corcione, Vincenzo Cusati, Fabrizio Nicolosi
Towards multidisciplinary design optimization of next-generation green aircraft
Luca Pustina, Matteo Blandino, Pietro Paolo Ciottoli, Franco Mastroddi
Improvements in on-board systems design for advanced sustainable air mobility
Claudia Conte, Domenico Accardo
Recent developments about hybrid propelled aircraft: a short review
L.M. Cardone, S. De Rosa, G. Petrone, F. Franco, C.S. Greco
Refined structural theories for dynamic and fatigue analyses of structure subjected to random excitations
Matteo Filippi, Elisa Tortorelli, Marco Petrolo, Erasmo Carrera
Facility for validating technologies for the autonomous space rendezvous and docking to uncooperative targets
M. Sabatini, G.B. Palmerini, P. Gasbarri, F. Angeletti
Simulation of in-space fragmentation events
Lorenzo Olivieri, Cinzia Giacomuzzo, Stefano Lopresti, Alessandro Francesconi
Scientific activity of Sapienza University of Rome aerospace systems laboratory on the study of lunar regolith simulants, focusing on their effect on the microwave fields propagation
Andrea Delfini, Roberto Pastore, Fabio Santoni, Michele Lustrino, Mario Marchetti
The new transmitting antenna for BIRALES
G. Bianchi, S. Mariotti, M.F. Montaruli, P. Di Lizia, M. Massari, M.A. De Luca, R. Demuru, G. Sangaletti, L. Mesiano, I. Boreanaz
Continuous empowering with laser power transmission technologies for ISRU moon assets: CIRA approach
Maria Chiara Noviello, Nunzia Favaloro
Preliminary design of a CubeSat in loose formation with ICEYE-X16 for plastic litter detection
Francesca Pelliccia, Raffaele Minichini, Maria Salvato, Salvatore Barone, Salvatore Dario dell’Aquila, Vincenzo Esposito, Marco Madonna, Andrea Mazzeo, Ilaria Salerno, Antimo Verde, Marco Grasso, Antonio Gigantino, Alfredo Renga
A revisited and general Kane’s formulation applied to very flexible multibody spacecraft
D.P. Madonna, P. Gasbarri, M. Pontani, F. Gennari, L. Scialanga, A. Marchetti
Concept and feasibility analysis of the Alba CubeSat mission
M. Mozzato, S. Enzo, R. Lazzaro, M. Minato, G. Bemporad, D. Visentin, F. Filippini, A. Dalla Via, A. Farina, E. Pilone, F. Basana, L. Olivieri, G. Colombatti, A. Francesconi
Space object identification and correlation through AI-aided light curve feature extraction
Chiara Bertolini, Riccardo Cipollone, Andrea De Vittori, Pierluigi Di Lizia, Mauro Massari
Development of a smart docking system for small satellites
Alex Caon, Luca Lion, Lorenzo Olivieri, Francesco Branz, Alessandro Francesconi
AUTOMA project: technologies for autonomous in orbit assembly operations
Alex Caon, Martina Imperatrice, Mattia Peruffo, Francesco Branz, Alessandro Francesconi
Overview of spacecraft fragmentation testing
Stefano Lopresti, Federico Basana, Lorenzo Olivieri, Cinzia Giacomuzzo, Alessandro Francesconi
Feasibility analysis of a CubeSat mission for space rider observation and docking
Chilin Laura, Bedendo Martina, Banzi Davide, Casara Riccardo, Costa Giovanni, Dolejsi Elisabetta, Quitadamo Vincenzo, Trabacchin Nicolò, Visconi Delia, Visentin Alessia, Basana Federico, Olivieri Lorenzo, Colombatti Giacomo, Francesconi Alessandro
Analysis of small spacecraft Mars aerocapture through a single-event drag modulation
Tobia Armando La Marca, Giorgio Isoletta, Michele Grassi
Onboard autonomous conjunction analysis with optical sensor
Luca Capocchiano, Michele Maestrini, Mauro Massari, Pierluigi Di Lizia
Mini-IRENE, a successful re-entry flight of a deployable heatshield capsule
Stefano Mungiguerra, Raffaele Savino, Paolo Vernillo, Luca Ferracina, Francesco Punzo, Roberto Gardi, Maurizio Ruggiero, Renato Aurigemma, Pasquale Dell’Aversana, Luciano Gramiccia, Samantha Ianelli, Giovanni D’Aniello, Marta Albano
Electro-thermal dynamic simulations and results of a deorbiting tethered system
G. Anese, G. Colombatti, A. Brunello, A. Valmorbida, G. Polato, S. Chiodini, E.C. Lorenzini
Mechanical and pneumatic design and testing of a floating module for zero-gravity motion simulation
Simone Galleani, Thomas Berthod, Alex Caon, Luca Lion, Federico Basana, Lorenzo Olivieri, Francesco Branz, Alessandro Francesconi
Simulations for in-flight stellar calibration aimed at monitoring space instruments optical performance
Casini Chiara, P. Chioetto, A. Comisso, A. Corso, F. Frassetto, P. Zuppella, V. Da Deppo
Reduced-order modelling of the deployment of a modified flasher origami for aerospace applications
A. Troise, P. Celli, M. Cinefra, V. Netti, A. Buscicchio
Deployment profile analysis for tethered deorbiting technologies
G. Polato, A. Valmorbida, A. Brunello, G. Anese, S. Chiodini, G. Colombatti, E.C. Lorenzini
The Janus COM mechanism onboard the JUICE probe to the Jovian system
G. Colombatti, A. Aboudan, M. Bartolomei, S. Chiodini, A. Dattolo, G. Noci, F. Sarti, T.Bilotta, A.Colosimo
Comparison of LARES 1 and LARES 2 missions – one year after the launch
Ignazio Ciufolini, Antonio Paolozzi, Emiliano Ortore, Claudio Paris, Erricos C. Pavlis, John C. Ries, Richard Matzner
Tracking particles ejected from active asteroid Bennu with event-based vision
Loïc James Azzalini, Dario Izzo
Totimorphic structures for space application
Amy Thomas, Jai Grover, Dario Izzo, Dominik Dold
Pushing the limits of re-entry technology: an overview of the Efesto-2 project and the advancements in inflatable heat shields
Giuseppe Guidotti, Giuseppe Governale, Nicole Viola, Ingrid Dietleinc, Steffen Callsen, Kevin Bergmann, Junnai Zhai, Roberto Gardi, Barbara Tiseo, Ysolde Prevereaud, Yann Dauvois, Giovanni Gambacciani, Giada Dammacco
The ATEMO device: a compact solution for earth monitoring
Federico Toson, Alessio Aboudan, Carlo Bettanini, Giacomo Colombatti, Irene Terlizzi, Sebastiano Chiodini, Lorenzo Olivieri
The Hera Milani mission
M. Cardi, M. Pavoni, D.Calvi, F. Perez, P. Martino, I. Carnelli, Milani consortium members
Small celestial body exploration with CubeSat Swarms
Emmanuel Blazquez, Dario Izzo, Francesco Biscani, Roger Walker, Franco Perez-Lissi
Low-energy earth-moon mission analysis using low-thrust optimal and feedback control
A. Almonte, I. Ziccardi, A. Adriani, A. Marchetti, M. Pontani
The application of modal effective mass for PCB friction lock compliance against spacecraft launch random vibration spectrum
Mark Wylie, Leonardo Barilaro
Near-optimal feedback guidance for low-thrust earth orbit transfers
D. Atmaca, M. Pontani
Reduced-attitude stabilization for spacecraft boresight pointing using magnetorquers
Fabio Celani
Trajectory optimization and multiple-sliding-surface terminal guidance in the lifting atmospheric reentry
Edoardo Maria Leonardi, Mauro Pontani
Analytic formulation for J2 perturbed orbits
Silvano Sgubini, Giovanni B. Palmerini
Low-thrust maneuver anomaly detection of a cooperative asset using publicly available orbital data
Riccardo Cipollone, Pierluigi di Lizia
Efficient models for low thrust collision avoidance in space
Juan Luis Gonzalo, Camilla Colombo, Pierluigi Di Lizia, Andrea De Vittori, Michele Maestrini, Pau Gago Padreny, Marc Torras Ribell, Diego Escobar Antón
An overview of the ArgoMoon and LICIAcube flight dynamics operations
Marco Lombardo, Luis Gomez Casajus, Marco Zannoni, Igor Gai, Edoardo Gramigna, Paolo Tortora, Elisabetta Dotto, Marilena Amoroso, Simone Pirrotta, Valerio Di Tana, Biagio Cotugno, Silvio Patruno, Francesco Cavallo, the LICIACube Team
Re-entry predictions of space objects and impact on air traffic
Franco Bernelli-Zazzera, Camilla Colombo, Mattia Recchia
Update on green chemical propulsion activities and achievements by the University of Padua and its spin-off T4I
F. Barato, A. Ruffin, M. Santi, M. Fagherazzi, N. Bellomo, D. Pavarin
1D numerical simulations aimed to reproduce the operative conditions of a LOx/LCH4 engine demonstrator
Angelo Romano, Daniele Ricci, Francesco Battista
Fast reconfiguration maneuvers of a micro-satellite constellation based on a hybrid rocket engine
Antonio Sannino, Stefano Mungiguerra, Sergio Cassese, Raffaele Savino, Alberto Fedele, Silvia Natalucci
Tests and simulations on 200N paraffin-oxygen hybrid rocket engines with different fuel grain lengths
Stefano Mungiguerra, Daniele Cardillo, Giuseppe Gallo, Raffaele Savino, Francesco Battista
Thermite-for-demise (T4D): thermite characteristics heuristic optimization on object- and spacecraft-oriented re-entry models
Alessandro Finazzi, Filippo Maggi, Tobias Lips
Numerical and experimental assessment of a linear aerospike
Emanuele Resta, Gaetano Maria Di Cicca, Michele Ferlauto, Roberto Marsilio
Numerical suite for the design, simulation and optimization of cathode-less plasma thrusters
Nabil Souhair, Mirko Magarotto, Raoul Andriulli, Fabrizio Ponti
Particle migration modeling in solid propellants
Raoul Andriulli, Nabil Souhair, Luca Fadigati, Mattia Magnani, Fabrizio Ponti
Validation of a numerical strategy to simulate the expansion around a plug nozzle
Marco Daniel Gagliardi, Luca Fadigati, Nabil Souhair, Fabrizio Ponti
Solar simulator facility for the verification of space hardware performance
C. Bettanini, M. Bartolomei, S. Chiodini, L. Tasinato, P. Ramous, F. Dona, S. Debei
Trajectory reconstruction by means of an event-camera-based visual odometry method and machine learned features
S. Chiodini, G. Trevisanuto, C. Bettanini, G. Colombatti, M. Pertile
The wide angle camera of rosetta
Giampiero Naletto
Development of a modular central electronic unit (CEU) for data handling and management in Martian atmosphere investigations
L. Marrocchi, M. Marchetti, F. Costa, S. Debei
SIMBIO-SYS, the remote sensing instruments on board the BepiColombo mission
G. Cremonese, C. Re, the SIMBIO-SYS team
The ESA PANGAEA programme: training astronauts in field science
Matteo Massironi, Francesco Sauro, Samuel J. Payler, Riccardo Pozzobon, Harald Hiesinger, Nicolas Mangold, Charles S. Cockell, Jesus Martínez Frias, Kåre Kullerud, Leonardo Turchi, Igor Drozdovskiy, Loredana Bessone
Front cover for space optical telescopes. a legacy from ROSETTA to JUICE
G. Parzianello, M. Bartolomei, S. Chiodini, M. Zaccariotto, G. Colombatti, A. Aboudan, C. Bettanini, S. Debei
In-vacuo structured fabrics for vibration control
Paolo Gardonio, Sofia Baldini, Emiliano Rustighi, Ciro Malacarne, Matteo Perini
Experimental application of pseudo-equivalent deterministic excitation method for the reproduction of a structural response to a turbulent boundary layer excitation
Giulia Mazzeo, Mohamed Ichchou, Giuseppe Petrone, Olivier Bareille, Francesco Franco, Sergio De Rosa
Labyrinth quarter-wavelength tubes array for the reduction of machinery noise
G. Catapane, G. Petrone, O. Robin, J.-C. Gauthier-Marquis, S. De Rosa
Comparative study of shock response synthesis techniques for aerospace applications
Ada Ranieri, Simone De Carolis, Giuseppe Carbone, Michele Dassisti, Andrea De Cesaris, Leonardo Soria
Vibro-acoustic analysis of additively manufactured acoustic metamaterial via CUF adaptive finite elements
M. Rossi, M.C. Moruzzi, S. Bagassi, M. Corsi, M. Cinefra
A brief review of pilots’ workload assessment using flight simulators: subjective and objective metrics
Giuseppe Iacolino, Antonio Esposito, Calogero Orlando, Andrea Alaimo
Applying an interior VR co-design approach for the medical deployment vehicle of the future
J. Herzig, F. Reimer, M. Lindlar, P. Weiand, J. Biedermann, F. Meller, B. Nagel
Innovative ideas for the use of augmented reality devices in aerodrome control towers
Jürgen Teutsch
ADS-B driven implementation of an augmented reality airport control tower platform
Tommaso Fadda, Sara Bagassi, Marzia Corsi
Maturity-based taxonomy of extended reality technologies in aircraft lifecycle
Sara Bagassi, Marzia Corsi, Francesca De Crescenzio, Martino Carlo Moruzzi, Sandhya Santhosh
