A peridynamics elastoplastic model with isotropic and kinematic hardening for static problems

A peridynamics elastoplastic model with isotropic and kinematic hardening for static problems

Mirco Zaccariotto, Atefeh Pirzadeh, Federico Dalla Barba, Lorenzo Sanavia, Florin Bobaru, Ugo Galvanetto

download PDF

Abstract. This study proposes a formulation equivalent to J2 plasticity with the associated flow rule to simulate the elastoplastic behavior of materials with isotropic or kinematic hardening in a peridynamic framework. The capabilities of the developed formulation are analysed through 2D and 3D case studies whose results (displacement and stress field) are compared with those obtained from the corresponding FEM models.

Keywords
Ordinary State-Based Peridynamics, Elastoplastic Materials, Isotropic Hardening, Kinematic Hardening

Published online 11/1/2023, 5 pages
Copyright © 2023 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Mirco Zaccariotto, Atefeh Pirzadeh, Federico Dalla Barba, Lorenzo Sanavia, Florin Bobaru, Ugo Galvanetto, A peridynamics elastoplastic model with isotropic and kinematic hardening for static problems, Materials Research Proceedings, Vol. 37, pp 394-398, 2023

DOI: https://doi.org/10.21741/9781644902813-87

The article was published as article 87 of the book Aeronautics and Astronautics

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] S.A. Silling, M. Epton, O. Weckner, J. Xu, E. Askari, Peridynamic states and constitutive modeling, J. Elasticity 88 (2007) 151-184. https://doi.org/10.1007/s10659-007-9125-1
[2] Simo, J.C., Hughes, T.J.R., Computational inelasticity. volume 7. Springer-Verlag, New York, 1998. https://doi.org/10.1007/b98904
[3] Mitchell, J.A., A nonlocal, ordinary, state-based plasticity model for peridynamics, Technical Report. Sandia National Laboratories, Albuquerque, NM, and Livermore, CA, (2011).
[4] Mousavi, F., Jafarzadeh, S., Bobaru, F., An ordinary state-based peridynamic elastoplastic 2D model consistent with J2 plasticity. Int. J. of Solids and Structures 229 (2021). https://doi.org/10.1016/j.ijsolstr.2021.111146
[5] A. Pirzadeh, F. Dalla Barba, F. Bobaru, L. Sanavia, M. Zaccariotto, U. Galvanetto, Elastoplastic Peridynamic formulation for materials with isotropic and kinematic hardening, submitted for publication (2023).
[6] Madenci, E., Oterkus, S., Ordinary state-based peridynamics for plastic deformation according to von mises yield criteria with isotropic hardening. J. of the Mech. and Ph. of Solids 86 (2016) 192–219. https://doi.org/10.1016/j.jmps.2015.09.016
[7] Liu, Z., Bie, Y., Cui, Z., Cui, X., Ordinary state-based peridynamics for nonlinear hardening plastic materials’ deformation and its fracture process. Eng. Fract. Mech. 223 (2020). https://doi.org/10.1016/j.engfracmech.2019.106782