Material Forming – ESAFORM 2025
Eds. Pierpaolo Carlone, Luigino Filice, Domenico Umbrello
Materials Research Proceedings Volume 54
Publication Date 2025, 2616 pages
ePDF ISBN 978-1-64490-359-9  (release date May 2025)
DOI: https://doi.org/10.21741/9781644903599

The ESAFORM 2025 proceedings covers 280 papers on a wide range of topics, including: Additive Manufacturing, Composites Forming Processes, Extrusion and Drawing, Forging and Rolling, Formability of Metallic Materials, Friction and Wear in Metal Forming, Incremental and Sheet Metal Forming, Innovative Joining by Forming Technologies, Optimization and Inverse Analysis in Forming, Machining, Cutting, and Severe Plastic Deformation Processes, Material Behavior Modelling, New and Advanced Numerical Strategies for Material Forming, Non-Conventional Processes, Polymer Processing and Thermomechanical Properties and Sustainability in Material Forming.

Table of Contents


Experimental assessment and 2D-Modelling of the viscous sintering of superimposed filaments based on biopolymer
Laurent CHAUNIER, Mélanie THADASACK, Anne-Laure REGUERRE, Achraf CHEBBI, Lucas HUTTIN, Amélie MOISY, Sébastien COMAS-CARDONA, Timm WEITKAMP


Flexible resins lattices produced by stereolithography for biomedical applications
Stefano Belcuore, Stefano Pandini, Elisabetta Ceretti, Paola Ginestra


Study of metallic particle bonding on thermoplastic substrate in cold spray
Enrico D’Auria, Vitantonio Esperto, Fausto Tucci, Felice Rubino


Modeling the filament of magnesium alloys
Bruni Carlo


Investigation of process-geometry-microstructure-properties relationships in Inconel 718 single-bead deposits using wire based laser metal deposition
Mabrouk DERGUINI, Yannick BALCAEN, Morgane MOKHTARI, Joël ALEXIS


Design of experiment on smart materials: tensile test on 3D printed composites reinforced with continuous carbon fiber and resistivity detection
Imi Ochana, François Ducobu, Mohamed Khalil Homrani, Anthonin Demarbaix


Ultrasonic monitoring and machine learning integration for layer-by-layer defect detection in PBF-LB/M
El Arbi HAJJIOUI, Foued ABROUG, Khanh NGUYEN, Maher BAILI, Kamal MEDJAHER, Lionel ARNAUD


Modelling bead deposition in material extrusion using the smoothed particle hydrodynamics framework PySPH
Lukas HOF, Felix FRÖLICH, Florian WITTEMANN, Luise KÄRGER


The location effect on IN625 fabricated by the laser powder bed fusion process
Sara Bocchi, Mariangela Quarto, Gianluca D’Urso, Tommaso Pastore, Tommaso Persico


Analysis of mechanical and metallurgical properties of HSLA fabricated by wire and arc additive manufacturing (WAAM)
Matheus Miranda, Bruno S. Cota, Valdemar R. Duarte, Tarcísio G. Brito, Gustavo H.S.F.L. de Carvalho, Telmo G. Santos


Effect of process parameters on mechanical properties of photopolymeric resin in masked stereolithography
Marina Andreozzi, Iacopo Bianchi, Tommaso Mancia, Chiara Mignanelli, Michela Simoncini, Tommaso Verdini


Towards the 3D printing of inducible materials
Martín Pérez Sánchez, Manuel Ibañez, Luis Domenech Ballester


Thermal and mechanical performance of TPMS-based heat exchangers fabricated via additive manufacturing: A focus on gyroid structures
Valeria Palomba, Mohamed Chairi, Gabriele Marabello, Guido Di Bella


Optimizing additive manufacturing of sandwich structures: Effect of TPMS cores on flexural properties
Gabriele Marabello, Mohamed Chairi, Guido Di Bella


Study of the WAAM-CMT process for ER70S steel: Influence of the main parameters on the morphology of single tracks
Eleonora Viola, Alessia Teresa Silvestri, Andrea El Hassanin, Antonino Squillace


Wire arc additive manufacturing deposition with solid-state recycled wire processed via friction stir extrusion
G.H.S.F.L. Carvalho, G. Campatelli, D. Campanella, R. Di Lorenzo


Assessing the printability of alginate-cellulose-based inks for syringe extrusion printing
Caterina Pasotti, Miriam Seiti, Pieter De Wever, Paola Ginestra, Pedro Fardim, Eleonora Ferraris


Microstructural and defects investigation of AlCrFeMnNi-based high entropy alloy fabricated via laser powder bed fusion
Abdul Herrim Seidou, Catherine Blondiau, Olivier Dedry, Jérôme Tchoufang Tchuindjang, Anne Mertens


Predicting optimal L-PBF printing location according to desired part quality: A data-driven methodology
Gabriele Locatelli, Mariangela Quarto, Gianluca D’Urso, Claudio Giardini


Experimental study on the mechanical properties of ABS-Kevlar composite specimens during high-speed FFF
Ioannis T. CHRISTODOULOU, Nikolaos E. KARKALOS, Angelos P. MARKOPOULOS


Bonding between additively manufactured parts and CFRP: An investigation to increase mechanical performance by acting on joint geometry
Matteo Benvenuto, Marco Pizzorni, Chiara Mandolfino, Luigi Benvenuto, Enrico Lertora


Porosity analysis of L-PBF manufactured AZ91D components
Lennart Grüger, Joanna Szyndler, Felix Jensch, Sebastian Härtel


Effect of polymer melt flowability on printability of continuous carbon fiber prepreg filament
Ziguang Deng, Jieren Bai, Xiaolong Liu, Ying Yu, Yu Wang


Investigation of the influence of AI-controlled process parameter adjustment on the mechanical properties of LBPF-manufactured parts
Chukwuemeka Okolo, Katharina Eissing, Richard Williams, Felix Jensch, Omar Fergani, Sebastian Härtel


Enhanced drilling process to improve hole quality of additively manufactured Inconel 718 Alloy
Ozhan Kitay, Yusuf Kaynak, Aqib Mashood Khan


Effect of ring-shaped beam profiles in LPBF of Nickel alloy 718 on the surface roughness
Ersilia Cozzolino, Austin Tiley, John Middendorf, Antonello Astarita


Influence of surface quality on performance of forging dies produced by additive manufacturing: The role of post-processing in LPBF-manufactured X55 steel
Alexander Sviridov, Artem Alimov, Felix Jensch, Sergej Dubinin, Sebastian Härtel


Advancements in iron aluminide alloy processing: A comparative study with DED alternatives
Gökhan Ertugrul, Aliakbar Emdadi, Sebastian Härtel


Advanced multi-sensor monitoring system in wire arc additive manufacturing for enhanced process and parts production
Alessia Teresa Silvestri, Andrea El Hassanin, Giorgio de Alteriis, Eleonora Viola, Rosario Schiano Lo Moriello, Antonino Squillace


Framework for determining and simulating tensile properties of smart composite FDM printed parts
Mohamed Khalil Homrani, Anthonin Demarbaix, Imi Ochana, François Ducobu


Comparison of machine learning classification techniques for process window identification applied on different manufacturing processes
Manuel LOPEZ CABRERA, Wahb ZOUHRI, Sandra ZIMMER-CHEVRET, Alexandre COLLOT, Stéphane MATHIEU, Daniel BOEHM, Jean-Yves DANTAN


Internal structure of short fiber reinforced thermoplastics manufactured with fused filament fabrication
Alp Şık, Mahoor Mehdikhani, Jeroen Soete, Stepan V. Lomov, Hamed Tanabi, Baris Sabuncuoglu


Electrochemical machining of 3D printed NiTi alloy: A preliminary study
Alessia Serena PERNA, Fabio SCHERILLO, Antonino SQUILLACE


Meso- and macroscale modelling strategies for biomimetic structures produced using L-PBF technology
Anastasia Ciccarella, Giuseppe Dell’Avvocato, Gabriele Cortis, Daniele Cortis, Donato Orlandi, Luca di Angelo, Luca Cortese, Edoardo Mancini


Investigations on material extrusion process for zirconia filled with a partially bio-based polymer
Delphine AUZENE, Marwa ABID, Mohamed BOUDIFA, Sébastien CHARLON, Luc ORDINSKI, Marie-France LACRAMPE, Thierry BARRIERE


Effect of retained porosity due to additive manufacturing on dynamic loadings
Benoit Revil-Baudard, Oana Cazacu, Sujeily Soto-Medina, Philip Flater


On the morphing behavior of 4D printed PLA-based parts
Mylene S. Cadete, Idalina Gonçalves, Victor Neto


A Preliminary study: Support-free manufacturing of rotationally symmetric pipes from continuous carbon fiber reinforced polymers with multi-axis 3D printing
Zsolt KÁLLAI, Johann KIPPING, Jan BREMER, Thorsten SCHÜPPSTUHL


Experimental investigation to reduce knit line effects in C-SMC
Marcel Olma, Nils Meyer, Sergej Ilinzeer, Florian Wittemann, Constantin Krauß, Luise Kärger


Significance of the material parameters within a three-dimensional solid-shell element for thermoforming simulation
Johannes Mitsch, Bastian Schäfer, Luise Kärger


Numerical modeling of the process parameters in the pultrusion of preconsolidated polypropylene/glass tapes
Paolo DE SIO, Vitantonio ESPERTO, Fausto TUCCI, Pierpaolo CARLONE


Numerical modeling for forming of woven composites based on 3D strain gradient elasticity
Deyong Sun, Shuyuan Li, Shan Tang, Weizhao Zhang


A comprehensive numerical workflow to simulate post-manufacture shape distortions in composite materials
Yvan DENIS, Nihad SIDDIG, Santiago MONTAGUD, Clément FREYSSINET, Tanguy MORO, Sibin SASEENDRAN, Estelle CASTANET


Manufacturing tool optimization using a comprehensive multi-physical numerical workflow for high performance composites
Maxence COUSSY, Yvan DENIS, Mehdi MARIN, Simon RIEU, Damien LECOINTE, Gaëlle GUYADER


Flow front tracking in SCRIMP processes by simultaneous visual and dielectric monitoring
Vitantonio Esperto, Felice Rubino, Fausto Tucci, Pierpaolo Carlone


Numerical workflow for skin model tolerancing applied to a composite study
Clément FREYSSINET, Tanguy MORO, Yvan DENIS, Estelle CASTANET, Sibin SASEENDRAN


Mechanical properties of AFP-manufactured CF/PEEK vs CF/LM-PAEK ring coupons: Impact of process parameters on shear strength
Vincenzo IANNONE, Felice DE NICOLA, Giovangiuseppe GIUSTO, Mario COSTANTINI, Giovanni BRUNO, Pierpaolo CARLONE


Towards an efficient simulation tool for textile modelling at meso-scale
Baptiste LACROIX, Auriane PLATZER, Julien COLMARS, Emmanuelle VIDAL-SALLE


Prediction quality of macroscopic forming simulation of non-crimp fabrics for aerospace applications
Jan Paul Wank, Stefan Haas, Dominik Dörr, Patrik Runeberg, Benedikt Lux, Constantin Krauß, Bastian Schäfer, Luise Kärger


Finite element modeling of buckle defects formation during RTM preforming of dry woven reinforcements
Zakariae EL-ALAMI, Audrey HIVET, Gilles HIVET


Fiber migration in compression molded LFT-D materials: characterization proposal and first results
Christoph Schelleis, Luca Meckes, Frank Henning


Investigating the strength of adhesively bonded SMC components
Michele Tropeano, Gianluca Gatti, Luca Raimondi, Lorenzo Donati, Davide Serradimigni


Press forming simulations: Is our characterization hitting the mark?
Wouter Grouve, Dennis Brands, Sebastiaan Wijskamp, Remko Akkerman


Sheet Molding Compound with highly aligned fiber reinforcement: An experimental investigation
Elias Gall, Sergej Ilinzeer, Frank Henning


Optimization of the infusion process with acrylic resin through physics-based simulation
Nihad Siddig, Yvan Denis, Antoine De Fontgalland, Damien Lecointe, Philippe Le Bot


Single point incremental forming of multi-matrix continuously-reinforced composites: A feasibility study
Jan-Erik RATH, Doran NETTIG, Dominic R. PALUBISKI, Thorsten SCHÜPPSTUHL, Dmitry S. IVANOV


Effect of process parameters on mechanical properties of CFRP components obtained by filament winding process
Marina Andreozzi, Daniele Ciccarelli, Massimo Di Pietro, Tommaso Mancia, Chiara Mignanelli, Michela Simoncini


Embedded element approach for the design of modular forming
Dominic R. Palubiski, Janice M. Dulieu-Barton, Ian Hamerton, Dmitry S. Ivanov


Influence of gripper positions on the formation of wrinkles during the thermoforming process of thermoplastic UD-tape laminates
Georg Zeeb, Johannes Mitsch, Michael Wilhelm, Luise Kärger, Frank Henning


Capabilities and limitations of pure-shear based macroscopic forming simulations for 0°/90° biaxial non-crimp fabrics
Bastian Schäfer, Dominik Dörr, Naim Naouar, Jan Paul Wank, Luise Kärger


Evaluation of hydronitrogen plasma treatment to improve the bonding process of PCM composite material in automotive: A case study
G. Gatti, M. Tropeano, L. Giorgini, L. Donati, F. Della Torca, G. Gentile, L. Mazzocchetti


Squeeze flow visualization using digital image correlation
Gerben BIELEMAN, Wouter J.B. GROUVE, Francesco RONDINA, Edwin T.J. KLOMPEN, Remko AKKERMAN


Investigation of cure kinetic model and gel point for a vinylester-based SMC material
Federico Bernardi, Davide Serradimigni, Tomasz Garstka, Luca Raimondi, Lorenzo Donati


Continuous microtomography of the hot press consolidation of high performance CF/PAEK layered composites
Adrien LE REUN, Arthur LEVY, Nicolas LEFEVRE, Henri-Alexandre CAYZAC, Vincent SOBOTKA, Steven LE CORRE


Creation of ‘over-moulded’ PEEK samples for interface bond strength predictions
Maria Veyrat Cruz-Guzman, Jonathan P.-H. Belnoue, Stephen J. Eichhorn, Adam Chaplin, John Grasmeder, Dmitry S. Ivanov


Influence of the pre-heating process of thermoplastic mono-material sandwich-structures for thermoforming
Anna Krüger, Sascha Kilian, Frank Henning


3D multi-scale thermal modeling of AFP in-situ consolidation processes for thermoplastic composites using an Eulerian FEM approach
Bruno A. Storti, Adrien Le Reun, Steven Le Corre


Process-performance relationship of the CF/PA6 laminates
Sepehr Simaafrookteh, Canbek Giray, Stepan V. Lomov, Jan Ivens


Modelling compaction-induced defects in overmoulding of thermoplastic composites
Anatoly Koptelov, Xun Wu, Will Darby, Andrew Parsons, Ole T. Thomsen, Stephen R. Hallett, Lee T. Harper, Jonathan P.-H. Belnoue


Design and manufacturing of thermoplastic matrix composite panels with overmoulded stiffening grids
Philippe OLIVIER, Bruno CASTANIE, Florian NEUVEU, Christophe CORNU


Numerical analysis of the compression molding process of automotive structures by means of direct fiber simulation
Mario Castro, Luca Raimondi, Davide Serradimigni, Lorenzo Donati


An open-source object oriented finite element software for composite forming
Eduardo Guzman-Maldonado, Nahiene Hamila


The first European benchmark exercise on squeeze flow testing of high-performance carbon fibre sheet moulding compounds
Connie Qian, Miro Duhovic, Dominic Schommer, Florian Gortner, Andreas Gebhard, Thomas Neumeyer, Marcel Olma, Louis Schreyer, Luise Kärger, Martin Hohberg, Hao Yuan, Anna Julia Imbsweiler, Leah Senn Ramirez, Sepehr Simaafrookhteh, Jan Ivens, Stepan V. Lomov, Gerben Bieleman, Wouter Grouve, Francois Mahé, Christophe Binetruy, Andreas Kapshammer, Zoltan Major, Dmitry S. Ivanov, Jonathan P.-H. Belnoue, Anatoly Koptelov, Jakub Jakimow, Yvonne Aitomaki, Dimitra Ramantani


Domain-oriented multiscale optimization for composite materials
João Dias-de-Oliveira, Joaquim Pinho-da-Cruz, Filipe Teixeira-Dias


Industrial automated finite element analysis for dry fibre composite forming
Lachlan M. Williams, Adam J. Thompson, Stephen R. Hallett, Jonathan P-H. Belnoue, Sjoerd van der Veen


Effect of application of pseudo-porthole die in hot extrusion of AA6063 chips for direct recycling on mechanical properties of products
Sorawut Srichana, Tatsuya Funazuka, Takumi Urakawa, Tomomi Shiratori, Noriyasu Oguma, Numpon Mahayotsanun, Kuniaki Dohda


Investigation of the repeatability of residual stress measurements using X-ray diffraction on cold extruded cups
Manuel FRIEDLEIN, Dominik HOFFMANN, Michael KNAPS, Marion MERKLEIN


Comprehensive analysis of waving defects in aluminium profile extrusion
Ivan Kniazkin, Ivan Kulakov, Nikolay Biba


Friction extrusion from AlMgSi machining waste at high extrusion ratio
Guilherme Poy Ignacio, Lars Rath, Uceu F.H. Suhuddin, Benjamin Klusemann


Numerical simulation of hot extrusion of a novel Mg-Zn-Ca alloy and its comparison with AZ31 alloy
Reeturaj Tamuly, Digavalli Ravi Kumar, Sivanandam Aravindan


Prediction of charge-weld strength in aluminum extrusion using solid-state welding models
Eren Can Sariyarlioglu, Jun Ma, Torgeir Welo


Microstructure prediction using finite element simulation and artificial neural network for extrusion of AA6XXX aluminum alloy
Marco Negozio, Riccardo Pelaccia, Sara di Donato, Barbara Reggiani, Lorenzo Donati, Adrian H.A. Lutey


Comparison of different machine control modes during friction extrusion of AA2024
Harikrishna Rana, Chang Chan, Uceu F.H. Suhuddin, Noomane Ben Khalifa, Benjamin Klusemann


Effect of material characterization via torsion tests on the accuracy of FEM simulations in the extrusion process
Sara Di Donato, Riccardo Pelaccia, Marco Negozio, Nicola Lai, Mohamad El Mehtedi, Barbara Reggiani, Lorenzo Donati


Effect of Si, Cu, Mn additions on the extrudability of recycled Al-Zn-Mg alloys
Baptiste Faivre, Jun Ma, Kai Zhang, Krzysztof Zaborowski, Xiang Ma


Modeling of charge welds evolution through Cahn-Hilliard equation for interaction between different Fluids: Experimental-numerical comparison with industrial case studies
Sara Di Donato, Riccardo Pelaccia, Marco Negozio, Barbara Reggiani, Lorenzo Donati


Optimization of the manufacturing process to minimize porosity in a CW614N brass sealing cap
Levy Bertoletti, Claudio Rossini, Luca Girelli, Lorenzo Montesano, Marcello Gelfi, Annalisa Pola


Towards hybrid modelling of aluminium extrusion mechanical properties – A univariate representation of artificial aging
Christian Dalheim Øien, Ole Runar Myhr, Geir Ringen


Simulation of the evolution of microstructure during extrusion of an AA6082
Sindre Hovden, Johannes Kronsteiner, Amir Horr


Extreme gradient boosting (XGB)-driven simulator for radial-axial force estimation in ring rolling
Mattia Perin, Guido Berti


Inhibition of tool surface degradation in hot forging through tailored forming of hybrid dies
Michael TILL, Julius PEDDINGHAUS, Janina SIRING, Johanna UHE, Kai BRUNOTTE


Numerical process design for hot forging of steel encased titanium workpieces
Janina Siring, Donik Brahimi, Jytte Möckelmann, Hendrik Wester, Johanna Uhe, Bernd-Arno Behrens


Investigation of the combined effect of friction and interstand tension on the work conditions of a two-stands reversing cold mill
Antonio Piccininni, Mattia Antonicelli, Angela Cusanno, Pasquale Guglielmi, Donato Sorgente, Gianfranco Palumbo


Thermal and mechanical load on the die clamping system in the forging hammer
Nico WAGNER, Robert TEHEL, Christian NAUMANN, Joachim REGEL, Martin DIX


AI supported process optimisation in a multi-material cup backward extrusion process chain
Eduard Ortlieb, Hendrik Wester, Johanna Uhe, Bernd-Arno Behrens


Wear effects on coated tools during the alternating forming of case-hardening steel and aluminium wrought alloy
Armin Armin PIWEK, Julius PEDDINGHAUS, Johanna UHE, Kai BRUNOTTE


Numerical mapping of the surface roughness during skin pass rolling of high strength aluminum alloys using the plane strain upsetting test
Lena Koch, Min Chen, Holger Brüggemann, David Bailly, Emad Scharifi


Laser triangulation for quality monitoring in automated series forging processes: A method for evaluating the component quality feature ‘flash’
Claudia GLAUBITZ, Marcel ROTHGÄNGER, Eduard ORTLIEB, Julius PEDDINGHAUS, Kai BRUNOTTE


Void closure behavior during hot forming of an Fe-Al alloy
Aliakbar EMDADI, Felix JENSCH, Joanna SZYNDLER, Hsuan-Po HUANG, Sebastian HÄRTEL, Sabine WEIß


Forging of hybrid gears with wear-resistant surfaces using deposition-welded semi-finished products
Niklas GERKE, Laura BUDDE, Eduard ORTLIEB, Simon PEDDINGHAUS, Kai BIESTER, Julius PEDDINGHAUS, Hendrik WESTER, Johanna UHE, Jörg HERMSDORF, Nick SCHWARZ, Ludger OVERMEYER, Bernd-Arno BEHRENS


Study of correlation between scraps and main process parameters in flow-forming alloy wheels production
Alessandro Trevisani, Andrea Abeni, Paola Serena Ginestra, Alessio Franchi, Alessandro Concoreggi, Mauro Silvestri, Elisabetta Ceretti


Crystal-plasticity finite-element simulations of two-step loading of a ferrite-martensite dual phase steel sheet
Takayuki HAMA, Yuto NAKATA, Naoki MIYAZAWA, Takashi MATSUNO, Yoshitaka OKITSU


Image-assimilation of deformed dual-phase steel microstructure via U-net deep learning
Takashi Matsuno, Yota Fukuda, Kazuyuki Shimizu, Hiroto Shoji, Mitsuru Ohata, Norio Yamashita, Hideo Yokota, Tetsuro Murai


Analysis of damage-dependent performance in deep-drawn metal components
Martina Müller, Lena Koch, Niklas Fehlemann, Marina Kemperle, Tim Herrig, David Bailly, Sebastian Münstermann, Thomas Bergs


Improvement in hole expansion ratios of dual phase DP 980 steels for holes prepared by electrical discharge machining by micro-plasma heat treatment
Aman Mohtta, Murugaiyan Amirthaligam, Uday Chakkingal


A cost-effective cold roll-forming FE model for industrial applications
Senart Timothy, Mathieu Gauchey


Process – structure – property relations in DP800 investigated using representative volume elements
Niklas C. Fehlemann, Dorothea Czempas, Maximillian Hribsek, Sebastian Münstermann


Electrically-assisted cyclic torsion of 5083 aluminium alloy
Daniel Dobras, Karol Jaśkiewicz, Maciej Zwierzchowski


Effect punch edge control on crack propagation during piercing of amorphous electrical steel sheets
Tomomi Shiratori, Nanaka Takahashi, Suguri Furuhata, Tatsuhiko Aizawa


Hole expansion limit prediction for DP980 steel sheet
Kazuma Kita, Toshihiko Kuwabara, Tomoki Nedachi, Yuya Murai, Nobuyuki Seki


Heat-assisted forming of high strength low alloy S700MC steel
Mehmet Okan Görtan, Melih Tuyan, Ali Osman Gündoğdu


Flexible stretch bending of AA6082-T4 and WT profiles using reconfigurable tooling
Chanmi Moon, Sigmund A Tronvoll, Torgeir Welo, Jun Ma


Strain-rate control in hydraulic bulge-tests: Theory and experiments
Holger ARETZ, Antonella COMETA, Ton VAN DEN BOOGAARD


A unified fracture model for cleavage and ductile fracture
Guijia Li, Zinan Li, Junhe Lian


Formability limits by local buckling in thin-walled tubes and profiles
Inês M. Almeida, João P. Magrinho, M. Beatriz Silva, Paulo A.F. Martins


On the mechanical behavior of steels subjected to reverse loading
Gabriela Vincze, Marilena C. Butuc, Rafael O. Santos


Near-net forging of high strength AISI316 stainless steel wires using massively nitrogen supersaturated CoCrMo superalloy dies
Tatsuhiko Aizawa, Tatsuya Fukuda, Takafumi Komatsu


Experimental investigation and analysis evaluations of the wear condition of AISI H13 material
Özgün Yurdakul, Aptullah Karakaş, Bülent Acar


Analysis of friction properties of DC04 using pin extrusion test with modified parameters
Marion VOGEL, Keyu LUO, Birgit VOGEL-HEUSER, Marion MERKLEIN


Effect of hybrid tool surface technologies on the wear performance of thin sheet shearing punches
Mehmet Okan Görtan, Ahmet Celal Topkaya, Yağmur Bayraktar


Experimental and numerical analysis of an improved adjustable ironing punch design
Kaarel Siimut, Kasper Mygind Madsen, Ermanno Ceron, Brian Møller, Giuliano Bissacco, Chris Valentin Nielsen


Intrinsic lubrication: A new approach in the context of the deep drawing process
Ermir Cakici, Werner Homberg


Tribological behavior and microstructure of IN718 produced by SPS in comparison with LMD and forged grades
Pierre GOREZ, Foad NAIMI, Eric FEULVARCH, Vincent FRIDRICI


Impact of surface engineering on friction stability and forming process variability in automotive components
Toni CHEZAN, Pieter BAART, Javad HAZRATI, Johan PILTHAMMAR


Influence of wire properties on electrohydraulic forming of thin sheet metals
Lasse LANGSTÄDTLER, Christian SCHENCK


SEM-EDX-based characterization of ductile damage in sheet metal forming of Al-Mg-Si alloy
Annemarie HEISER, Jonas WERNER, Martina MÜLLER, Thomas BERGS, Alexander SCHWEDT, Emad SCHARIFI, David BAILLY


Advanced thermomechanical flow forming: A novel approach to α’ martensite control for enhanced material properties
Bahman Arian, Werner Homberg, Lukas Kersting, Ansgar Trächtler, Julian Rozo Vasquez, Frank Walther


Iterative model of collar height in hole rolling for application in a closed-loop model predictive product property control
Daniel Spies, Frauke Hinrichs, Stefan Dietrich, Peter Groche, Volker Schulze


Investigation of the mechanical properties of embossed sheet metals materials under static and dynamic loads
Pascal Heinzelmann, Michael Vöhringer, Kim Rouven Riedmüller, Mathias Liewald


Effect of manufacturing process on mechanical properties of polyetheretherketone (PEEK) cranial implants produced by single-point incremental forming (SPIF)
Elizabeth MAMROS, Ihab RAGAI, Brian YOUNG


Production by 3D printing of modular tools for highly customizable hydroforming of light sheet metals
Pasquale Guglielmi, Antonio Piccininni, Paola Ginestra, Angela Cusanno, Andrea Abeni, Valerio Minafra, Elisabetta Ceretti, Gianfranco Palumbo


Effect of forming strategies on strain paths and local strain evolution in incremental sheet forming using digital image correlation
Raphaël LE FRANC, Ahmad AL KHATIB, Jean-François COULON, Jean-Benoît LE CAM, Gwenaël PICAUT


Influence of near-surface embossing on the hot crack formation during laser beam welding of metal sheets from 6000 aluminum alloys
Maximilian Bachmann, Kim Rouven Riedmüller, Johannes Michel, Christian Hagenlocher, Mathias Liewald, Thomas Graf


Formability analyses during multi-stage SPIF process using optimized ductile fracture locus
Abdul Samad, Shamik Basak


Experimental, analytical, and numerical analysis of clinched-assisted electromagnetic forming of AA1100 sheet
Rakesh Kumar Mishra, Ashish Rajak


Influence of forming temperature on damage and product performance in hot stamping of steel
Philipp Lennemann, A. Erman Tekkaya, Yannis P. Korkolis


Investigation of the influence of tool geometry on sheet thinning of bipolar plates in multi-stage embossing
Max MEERKAMP, Lars UHLMANN, Jan SOMMER, Martina MÜLLER, Tim HERRIG, Thomas BERGS


Hot double sided incremental forming of continuous fiber reinforced thermoplastics: Process analysis and system design
Doran NETTIG, Jan-Erik RATH, Thorsten SCHÜPPSTUHL, Johannes FRANK, Björn RIECKEN, Christian-André KEUN


Process analysis and microstructural influences during contact heating of aluminium
Ricardo Trân, Verena Psyk, Sven Winter, Martin Dix, Verena Kräusel


Real-time modelling of incremental multi-pass flow forming by a hybrid, data-based model
Lukas Kersting, Sharin Kumar Gunasagran, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler, Werner Homberg, Frank Walther


Effect of depth increment on damage in incremental sheet forming
Shiori Gondo, Maximilian A. Wollenweber, Hamed Dardaei Joghan, Marlon Hahn, Yannis P. Korkolis, A. Erman Tekkaya


Assessing the influence of modeling choices on finite element analysis for robotic single-point incremental sheet forming
José CAICEDO, Sandra CHEVRET, Idriss TIBA, Yessine AYED, Tudor BALAN


Investigations of property-controlled flow forming with defined strain hardening using a virtual sensor
Jeannette BOLL, Robert LAUE, Frank WENDLER, Carolin BINOTSCH, Till CLAUSMEYER, Sebastian HÄRTEL, Olfa KANOUN, Birgit AWISZUS


Glass4AutoFuture: Modeling thermal-mechanical dynamics in vacuum-assisted deep drawing of 3D thin glass components for automotive interiors
Anh Tuan VU, Constantin MEINERS, Skadi BÖGERSHAUSEN, Cornelia ROJACHER, Tim BREPOLS, Stefanie REESE, Thomas BERGS


Enhancing accuracy in two-point incremental sheet forming (TPIF): The influence of compliance and effective squeeze factor
Youngrok Lee, Zixuan Mu, Ankush Bansal, Alan Taub, Mihaela Banu


Feasibility of 5-axis CNC friction stir welding of Aluminum 3003-H14
Austin CLARK, Ihab RAGAI, Gianluca BUFFA, Livan FRATINI


Hybrid forming of metal-polymer gears: A feasibility assessment
Diego R. ALBA, Calvin EBERT, Philip REITINGER, Christian BONTEN, Mathias LIEWALD


Experimental and numerical investigation of the influence of rolling-induced sheet metal deformation on SPR joints
Malte Christian Schlichter, Özcan Harabati, Jean-Patrick Ludwig, Max Böhnke, Christian R. Bielak, Mathias Bobbert, Gerson Meschut


Simulation and modelling of press hardening and clinching using inductive heating
Mikhail Solovev, Anja Rautenstrauch, Andreas Kunke, Till Clausmeyer, Florian Gerstner


Contour extraction for enhanced quality control: Image analysis in mechanical joining
Franziska SCHÜTZELT, Christian KRAUS, Welf-Guntram DROSSEL


Optimization of friction stir welding parameters for steel joints in shipbuilding using machine learning and finite element analysis
Simone Panfiglio, Mohamed Chairi, Antonio Denaro, Gabriele Marabello, Chiara Borsellino, Guido Di Bella


Contactless temperature measurements on FSWed joints in aluminum and magnesium alloys
Iacopo Bianchi, Archimede Forcellese, Tommaso Mancia, Chiara Mignanelli, Massimiliano Pieralisi, Tommaso Verdini


Simulation of the joining process of graded hardened multi-range capable rivets
Pia K. Holtkamp, Christian R. Bielak, Mathias Bobbert, Gerson Meschut


Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry
Viktoria Olfert, Maik Gollnick, Keke Yang, Jacob Krause, David Hein, Gerson Meschut


Deep drawing effects of structured steel sheets with undercuts by cold rolling for interlocking joints
Aron Ringel, Karl Johann Tilly, David Bailly


Finite element analysis for controlling heat affected zone, hardness and grain size evolution in plasma arc welding of AISI 304
Serafino CARUSO, Francesco BORDA, Luigino FILICE


Data driven prognosis of clinch joints in multi-material design
Jean-Patrick Ludwig, Seraphin Tsi-Nda Lontsi, Jonas Neumann, Lukas Kappis, Christian Scharr, Wilko Flügge, Marion Merklein, Gerson Meschut


Direct hot rolling as a solid-state recycling process for green sheets production
Mohamad EL MEHTEDI, Noomane BEN KHALIFA, Pasquale BUONADONNA, Rayane EL MOHTADI, Gianluca MARONGIU, Francesco AYMERICH, Mauro CARTA


Hybrid joining of cast aluminum and sheet steel using refill friction stir spot welding with strength enhancement via adhesive application
Tong Shen, Rafael Piccoli, Leonardo Hendler, Andre Barbosa, Ting Chen, Uceu Suhuddin, Massimo Cucco, Benjamin Klusemann


Experimental investigation of rotational friction welding for EN AW-6082 – 20MnCr5 joints
Ahmed Dewidar, Alexej Verschinin, Norman Mohnfeld, Hendrik Wester, Sebastian Barton, Hans Jürgen Maier, Johanna Uhe


Expert-informed neural network (EINN) for the forming depth prediction from a small-scale sheet metal forming database
Luca Quagliato, Mattia Perin, Vahid Modanloo, Taeyong Lee


Intelligent approach for accurately identifying constitutive material parameters of anisotropic tubular materials
Ali Khalfallah, Zied Ktari, Luis Filipe Menezes


Influence of DIC settings on temperature fields in combined thermal-kinematic measurements for heterogeneous tests
Alessandro Lambrughi, Sandrine Thuillier, Sam Coppieters


Out-of-plane shear testing of anisotropic sheet metals using double bridge shear test
Bojan STARMAN, Andraž MAČEK, Tomaž PEPELNJAK, Miroslav HALILOVIČ, Sam COPPIETERS


Integrating stochastic effects and uncertainties into inverse analysis of hot bulk forging processes through automated API-driven finite element simulations and machine learning
Artem Alimov, Yuyao Jiang, Markus Gardill, Sebastian Härtel


Integration of a digital twin for data-driven modeling of punch-bending processes using the asset administration shell
Henning PETERS, Andreas MAZUR, Ansgar TRÄCHTLER, Barbara HAMMER


Inverse identification of anisotropic plasticity model parameters using FEMU and a heterogeneous test
Mafalda Gonçalves, Sandrine Thuillier, António Andrade-Campos


Projection-based reconstruction of dent strains in thin-walled metallic structures
Yajun Liu, Bojan Starman, Alessandro Lambrughi, Philip Eyckens, Rob Salaets, Miroslav Halilovič, Sam Coppieters


Virtual forming based on model calibration from heterogeneous tests
Lisa Germain, Mafalda Gonçalves, Thibault Barret, Antonio Andrade-Campos, Sandrine Thuillier


Uncertainty analysis in sheet metal forming processes: Troubleshooting with machine learning
Tomás Parreira, Daniel Cruz, Armando Marques, Pedro Prates, Marta Oliveira1, Diogo Neto, Abel Santos, Valdemar Fernandes, André Pereira


The human factor in FEM based optimization
Matteo STRANO, Etrugrul KAYA


Evaluating the impact of 3D constitutive models on predictive performance of xgboost for material parameter identification
Pedro Prates, Dário Mitreiro, Armando Marques, André Pereira, António Andrade-Campos


Yld2004-18p anisotropy parameter identification using ann models and variance-based input selection
Salam Ebrahim ABRAR, Lee Kinsey BRAD, Ha JINJIN


Investigating the strength of aluminum and copper parts produced by powder metallurgy using furnace and laser sintering
Muhannad Ahmed Obeidi, Ahmed R. Al-Hamaoy, Pruthviraj Hosuru Venkategowda, Jim White, Dermot Brabazon


On finishing turning of Inconel 718 using WC and CBN cutting inserts under dry conditions
Nicola Pozzato, Rachele Bertolini, Andrea Ghiotti, Stefania Bruschi


Influence of milling parameters of powder DED Inconel 718 on cutting forces, surface roughness and temperature
Sylvain Etzol, Guillaume Altmeyer, Arnaud Duchosal


Tool wear analysis in hobbing high torque splined shafts
Nils Paucke, Martin Beutner, Philipp Damm, Gunnar Meichsner, Georg Hahn, Dirk Zimmermann, Matthias Steffens, Matthias Hackert-Oschätzchen


Influence of punch velocity during high-speed blanking of 22MnB5 steel with electromagnetic drive
E. Galiev, M. Linnemann, S. Winter, L. Winter, V. Psyk, M. Dix


Smart process parameters adaptation for drilling of CFRP and AA7075 stacks
Martina Panico, Eva Begemann, Andreas Gebhardt, Felix Hartmann, Tobias Herrmann, Antonio Langella, Luca Boccarusso


Evaluations of in-process strains and residual stresses in Cp-Ti Gr 2 strips produced by large strain extrusion machining
Gursimranjot Singh Mavi, Ravinder Singh Joshi, Arshpreet Singh


Cryogenic effects on the mechanical behavior of bulk metallic glasses
Laura MANGOURNY, Bruno LAVISSE, Yessine AYED, Guénaël GERMAIN


Experimental investigation about abrasion wear of microtools through direct and indirect measurements.
Alessandro Metelli, Andrea Abeni, Aldo Attanasio


Impact of semi-finished part properties and process configuration on the final geometry of structural free-form bent profiles
Viktor Böhm, Lorenzo Scandola, Jeremias Tschannerl, Christina Sunderkötter, Alexander Harms, Dennis Lauterbach, Wolfram Volk


On the importance of heat source modeling for controlling molten pool geometry during laser surface treatment of Ti6Al4V alloy
Maria Rosaria Saffioti, Serafino Caruso, Mariateresa Caggiano, Giovanna Rotella


Milling of titanium alloy: Effects of different lubrorefrigeration conditions on environmental impact
Mariateresa Caggiano, Maria Rosaria Saffioti, Serafino Caruso, Giovanna Rotella, Agata Sposato


Influence of thinning design on cutting process in drilling
Shoichi TAMURA, Tomohiro KIKUCHI, Katsufumi INAZAWA, Takashi MATSUMURA


Assessment of tribological properties of straight oils in machining operations using various experimental setups
Vincent BURNICHON, Cédric COURBON, Ferdinando SALVATORE, Emilie VIEVILLE, Ugo MASCIANTONIO, Joël RECH


Finish milling of polylactide (PLA) 3D-printed parts: Influence of printing pattern and lubrication on final surface roughness
Margaux LORENZONI, Laurent SPITAELS, Edouard RIVIERE-LORPHEVRE, Jérémy ODENT, Rachid M’SAOUBI, Liam CLOËZ, Michaël FONTAINE, François DUCOBU


Investigating submicron particle generation in machining: The role of coolants and operational conditions
Iñigo RODRIGUEZ, Gregor FILIPIČ, Mikel CUESTA, Gorka ORTIZ-DE-ZARATE, Maja REMŠKAR, Franci PUŠAVEC, Pedro J. ARRAZOLA


Effect of ultrashort pulse laser parameters on periodic structure and friction properties of cemented carbide cutting tool
Atsushi Ezura, Taisei Shinbo, Hiroki Sasazaki, Naohiko Soma, Koutarou Fujino, Takashi Matsuzawa, Shoichi Tamura


Material flow during constrained friction processing and its effects on the local properties of AM50 rods
Camila Caroline de Castro, Ting Chen, Diogo de Campos Fernandes, Benjamin Klusemann


Experimental analysis of the substrate influence in tool life in slot milling of stainless steel
Iñaki M. ARRIETA, Mikel ETXEBESTE, Denis SORIANO, Alex RODRIGUEZ, Mikel ARTOLA, Gorka ORTIZ DE ZARATE, Pedro J. ARRAZOLA


Enhancing interfacial bonding strength in fiber-metal laminates through burnishing and laser texturing surface treatments for improved mechanical performance
Maria Rosaria Saffioti, Chiara Morano, Serafino Caruso, Mariateresa Caggiano, Giovanna Rotella, Domenico Umbrello


Life cycle assessment-guided design for sustainable microinjection molds
Giuseppe SERRATORE, Francesco BORDA, Vito BASILE, Luigino FILICE


Effect of different cryogenic lubrication methods on machinability of Ti6Al4V
Gabriel DE PAIVA SILVA, Yessine AYED, Bruno LAVISSE, Guénaël GERMAIN


Influence of grain size and cobalt content on machinability of tungsten carbide with diamond-coated tools
Markus DIEGEL, Markus MEURER, Thomas BERGS


Innovative process to fabricate curved aluminium frames reducing buy to fly and geometrical distortions
Gabriella Caputo, Francesco Passeggio, Giancarlo Ingenito, Sabato Inserra Imparato, Fatima Cicchiello


Theoretical modelling of yield stress in cold-rolled and annealed AISI 420 steel: Dependence on rolling pre-strain
Yadong ZHOU, Kegu LU, Redmer VAN TIJUM, Yutao PEI, Jan POST


Thermoviscoplastic modeling of the shearing process for mechanism-driven fine blanking of high manganese steel
Frank SCHWEINSHAUPT, Martina MÜLLER, Tim HERRIG, Thomas BERGS


Implementation of Uncoupled ductile damage model for damage assessment during edge stretching.
Mohd Firoz Alam, Fausto Tucci, Hariharan Krishnaswamy, Uday Chakkingal


Numerical modeling and experimental investigations of creep behaviour of polycarbonate
Lin Sun, Gang Cheng, Thierry Barrière


Simulation of lateral compressive deformation of wood by finite element analysis with lattice model
Shohei Kajikawa, Keitaro Oda, Takashi Kuboki, Soichi Tanaka, Masahiro Kondo, Mitsuru Abe, Masako Seki, Tsunehisa Miki


Determination of a machine learning constitutive model from biaxial tensile test: application to thermal forming limits prediction of AA6061 sheets from shear to equi-biaxial tension
Zhihao WANG, Dominique GUINES, Lionel LEOTOING


Material characterization of ferritic stainless steels at high temperatures
Jan FLESCH, Florian WEBER, Simon BURGER, Yannis P. KORKOLIS, A. Erman TEKKAYA


Thermodynamic model using Kelvin decomposition to predict the mechanical behaviour of single-crystal superalloys after casting operation
Louis ROCHE, Carl LABERGERE, Houssem BADREDDINE, Mylène LEDUC, Taha Niane NGADIA


Porosity evolution under shear loadings
Karl Knaak, Oana Cazacu, Benoit Revil-Baudard


CPFEM calibration of 3D Vegter yield locus for DWI battery cans
Saurabh RATHORE, Karo SEDIGHIANI, Eisso ATZEMA, Celal SOYARSLAN, Ton VAN DEN BOOGAARD


Solid-shell element for modeling consolidation-induced wrinkle defect formation
Maarten M. Hodzelmans, Stephen R. Hallett, Joris J.C. Remmers, Jonathan P.-H. Belnoue


Adaptive mesh refinement for efficient random cellular automata finite element analysis in complex geometries
Mateusz SITKO, Kacper PAWLIKOWSKI, Konrad PERZYNSKI, Lukasz MADEJ


Reducing the influence of the computational domain discretisation on grain growth in the cellular automaton austenite-to-ferrite transformation model
Mariusz Wermiński, Mateusz Sitko, Łukasz Madej


Data-driven approaches for predicting underfill in hot bulk forging processes
Yuyao Jiang, Artem Alimov, Marcus Knaack, Sebastian Härtel, Markus Gardill


Simulation of hollow embossing rolling for full-scale bipolar plates
Franz Reuther, Sven Winter, Verena Psyk, Verena Kräusel


Enhancing performance in bolt torque tightening using a connected torque wrench and augmented reality
Adeline FAU, Mina GHOBRIAL, Philippe SEITIER, Pierre LAGARRIGUE, Michel GALAUP, Alain DAIDIE, Patrick GILLES


Comparative analysis of a hypoelastic formulation with a hyperelastic one in the simulation of sheet metal forming processes
Marta C. OLIVEIRA, Rúben T. ALMEIDA, João P. BRITO, José L. ALVES


An analytical predictor machine learning corrector scheme for modeling lateral flow in hot strip rolling
Amirali HASHEMZADEH, Frederic E. BOCK, Camile HOL, Koen SCHUTTE, Antonella COMETA, Celal SOYARSLAN, Benjamin KLUSEMANN, Ton VAN DEN BOOGAARD


Barkhausen noise analysis for inline monitoring of residual stresses using a soft sensor for freeform bending with moveable die
Sophie Charlotte Stebner, Linghao Kong, Viktor Böhm, Ahmed Ismail, Boris Lohmann, Wolfram Volk, Sebastian Münstermann


Semi-solid thixoforming, microstructure, and mechanical properties of Al-6wt%Si alloy via liquid reaction sintering of elemental powders
Hu Lianxi, Liu Wenchao, Sun Yu, Ba Meiyi


Analysis of wear resistance of polymers metallized by cold spray
Dario DE FAZIO, Antonello ASTARITA, Luca BOCCARUSSO, Alessia PERNA, Antonio VISCUSI, Massimo DURANTE


Friction stir welding (FSW) of 1200-O aluminum alloy: Temperature distribution modeling and metallurgical characterization
Geraldo T. Costa, Valdemar R. Duarte, Tarcísio G. Brito, Francisco W.C. Farias, Rafael Nunes3, Gustavo H.S.F.L. de Carvalho, Gianni Campatelli, Bruno S. Cota


3D printing of soft actuators in nano-filled shape memory thermoplastic polyurethane
Luca Burratti, Denise Bellisario, Fabrizio Quadrini, Leandro Iorio, Loredana Santo


Optimizing parameter selection for machine learning models to predict coating characteristics in cold spray processes on polymeric materials
Alessia Serena PERNA, Alessia AURIEMMA CITARELLA, Fabiola DE MARCO, Luigi DI BIASI, Massimo DURANTE, Genoveffa TORTORA, Antonio VISCUSI


Concept and prototype of a 3-component extruder for fusion deposition of vibration-damping polymer concrete
Philipp Plänitz, Richard Petermann, Artem Shemchuk, Sören Majcherek, Markus Barth, Matthias Hackert-Oschätzchen


Accomplishing functional requirements of a device used in testing perforation resistance of a 3D printed part
Mihaela NICOLAU, Laurențiu SLĂTINEANU, AndreeaI STRATE, Marius-Andrei MIHALACHE, Oana DODUN


Analysis and description of under-water pressure waves usable for forming applications
Linda Fleischer, Verena Psyk, Maik Linnemann, Martin Dix


Direct deposition of CF/PEKK composite shims on CF composite laminates for aeronautics
Giorgio PATRIZII, Denise BELLISARIO, Dounia NOQRA, Leandro IORIO, Alice PROIETTI, Fabrizio QUADRINI, Loredana SANTO


Manufacturing of shape memory composite hinges by additive manufacturing
Dounia NOQRA, Denise BELLISARIO, Leandro IORIO, Giorgio PATRIZII, Alice PROIETTI, Fabrizio QUADRINI, Loredana SANTO


Abrasion resistance of some composite polymer materials
Roxana HOBJÂLĂ, Vasile ERMOLAI, Răzvan MITITELU, Adelina HRIȚUC, Elisaveta CRĂCIUN, Ioan SURUGIU, Laurențiu SLĂTINEANU, Cristian BISOG


Investigation on the surface integrity in electrical discharge machining of Co-Cr-Mo
Christoph Lerez, Chris Michaelis, Laura Zak, Lukas Blumenröhr, Matthias Hackert-Oschätzchen


Numerical investigation of pulsed welding on aluminum alloy with a dual-region laser source: Exploring non-equal pulse parameters
Piandoro Samuele, Fortunato Alessandro, Liverani Erica, Ascari Alessandro


Shape memory polymer composite device with embedded heater for one way soft actuation
Loredana SANTO, Denise BELLISARIO, Alice PROIETTI, Giorgio PATRIZII, Dounia NOQRA, Fabrizio QUADRINI, Leandro IORIO


Investigation of micro holes fabrication via metal extrusion (MEX) additive manufacturing for micro EDM manufacturing
Francesco G. Modica, Lara Rebaioli, Vito Basile, Alessandro Guida, Irene Fassi


Development of a casein-based matrix and mechanical properties of sustainable composites from cellulose and cellulose acetate: A preliminary study
Maria Rosaria Ricciardi, Vincenza Antonucci, Marco Russo, Lorena Affatato, Antonio Langella


Hemp/PLA impregnated yarn produced by pultrusion
Luca Boccarusso, Massimo Durante, Martina Panico, Maria Rosaria Ricciardi, Marco Russo, Antonio Langella


Numerical simulation of shell hydroforming of precipitation-hardened stainless steel
Subhrajit Chand, Ravi Kumar Digavalli, Hariharan Krishnaswamy, Anoop C.R., Narayana Murty S.V.S.


Parameter identification for deep rolling of X120Mn12+VC deposition layer
Murli Manohar PANDEY, Erik FORKE, Stefan SCHUBERTH, Toni SPRIGODE, Till CLAUSMEYER, Guntram WAGNER


Effect of surface preparation on adhesive bonding of CFRP compression molding laminates
Vincenzina Siciliani, Riccardo Pelaccia, Marco Alfano, Davide Castagnetti, Luca Raimondi, Alessandro Zanchi, Lorenzo Donati, Leonardo Orazi


A novel phase-field description for the anodic dissolution during electrochemical machining
Johanna Waimann, Annika Schmidt, Christian F. Niordson


Enhancing surface quality and corrosion resistance of LPBF nitinol alloy through electrochemical polishing
Matteo Tognazzo, Rachele Bertolini, Andrea Ghiotti, Stefania Bruschi


Properties evaluation on SiC reinforced aluminum composite under a novel process of cryogenic treatment
Baosheng Liu, Nan Guo, Yuansong Zeng , Ran Pan, Yunhe Chang, Zhiyong Li


Study on plasma electrolytic polishing (PeP) of deeper channel structures
Hans-Peter SCHULZE, Mathias HERZIG, Oliver KROENING


Considerations on the incremental forming of natural fibre-reinforced polypropylene composites
Antonio Formisano, Luca Boccarusso, Dario De Fazio, Giuseppe Irace, Massimo Durante


Experimental derivation of process input parameters for pulsed electrochemical machining of additively and conventionally produced 316L stainless steel
Alexander Thielecke, Pascal Clauß, Maximilian Schröder, Gunnar Meichsner, Richard Petermann, Philipp Damm, Matthias Hackert-Oschätzchen


Investigation of post-processing of additively manufactured stainless steel by electrochemical jet machining
Philipp DAMM, Daniel GROSCHUPP, Lars BERG, Alexander THIELECKE, Gunnar MEICHSNER, Matthias HACKERT-OSCHÄTZCHEN


Prediction of elastic properties of polyethylene terephthalate after biaxial elongation using a multiscale approach
Yun-Mei Luo, Luc Chevalier, Thanh Tung Nguyen


Enhancing weld in ultrasonic spot welding of carbon fibre-reinforced polyetheretherketone with polyetherimide energy director
Adrian KORYCKI, Christian GARNIER, France CHABERT, Fabrice CARASSUS, Toufik DJILALI


Mechanical and kinetic characterization of additively manufactured PLA structures for improved process and warpage modeling
Felix Frölich, Dominik Dörr, Alexander Jackstadt, Florian Wittemann, Luise Kärger


Modeling and numerical simulation of a friction-compression process for recycling thermoplastics
Sami Meksassi, Matthieu Zinet, Claire Barrès, Shihe Xin, M’hamed Boutaous


Improvement of thermal management of composites forming tools using lattice structures
Matthis Balthazar, Nicolas Baudin, Jérôme Soto, Sébastien Guéroult, Vincent Sobotka


Determination of induced modulus of PET bottles via free-blowing of preforms
Thanh Tung Nguyen, Yun-Mei Luo, Luc Chevalier


Mechanical characterization of plaster-based blends modified with high-density polyurethane wastes
David Rodríguez Izquierdo, Carmine Borgia, Luigino Filice, Francesco Gagliardi


Resistance welding of thermoplastic composites with Elium-impregnated carbon-fibre heating element
Luigi Benvenuto, Leonardo Ferretti, Enrico Lertora, Chiara Mandolfino, Matteo Benvenuto, Marco Pizzorni


Linking surface appearance to MEX processing parameters
Roberto SPINA, Nicola GURRADO


Thermo-mechanical properties of polylactic acid/olive wood composite for additive manufacturing
Francisco Comino, José A. Martinez-Sánchez, Pablo E. Romero, Nicola Gurrado, Roberto Spina


Injection molding simulations for the manufacturing of polymer hollow microneedles
Pol Vanwersch, Tim Evens, Sylvie Castagne, Albert Van Bael


Anisotropic expansion and shrinkage behavior of thermosetting prepreg layups with respect to the compaction strategy
Sourour Traouli, Steven Le Corre, Vincent Sobotka, Mael Péron, Jago Pridie


Determination of welding parameters for polypropylene rods on a prototype friction welding machine
Sarantis NIKOLETAKIS, George-Christopher VOSNIAKOS, Protesilaos KOSTAZOS


Thermal effects on bead morphology in fused filament fabrication: A numerical approach to recycled PLA deposition
Mario Emanuele DI NARDO, Francesco NAPOLITANO, João DIAS-DE-OLIVEIRA, Tiago SILVA, Pietro RUSSO, Pierpaolo CARLONE


Numerical modelling of thermoplastic CO2 assisted extrusion foaming: Exploring the process-microstructure relationship
Mustafa ALTINISIK, Margot CHAUVET, Martial SAUCEAU, Raffaele D’ELIA, Romain SESCOUSSE, Fabien BAILLON, Guilhem MICHON


A quantitative assessment of variability in impact polypropylene mechanical recycling
Henda MRABTI, Gaël COLOMINES, Sophie QUILLARD, Yves BÉREAUX


Life cycle assessment of natural fibers recovery techniques: A comparison between mechanical and chemical procedures
Francesco NAPOLITANO, Ersilia COZZOLINO, Alessandro Andrea SCHIAVO, Ilaria PAPA, Antonello ASTARITA, Pietro RUSSO


Feasibility of infusion processing for carbon fiber/vitrimeric epoxy composites
Barbara Palmieri, Fabrizia Cilento, Fausto Tucci, Antonio Viscusi, Alessia Serena Perna, Antonello Astarita, Michele Giordano, Eugenio Amendola, Alfonso Martone


Optical scanning application for numerical calibration of strain analysis on injection molded rail fastening components
Giulia Zaniboni, Keltoum Oubellaouch, Riccardo Pelaccia, Vincenzina Siciliani, Leonardo Orazi, Barbara Reggiani


A comparative study of recycled PET, PETG, and virgin opaque PET for material extrusion
Domenyo Thierrie ASSEM, Tiphaine MÉRIAN, France CHABERT, Amevi TONGNE, Kodjo ATTIPOU, Adékunlé SALAMI


Friction stir consolidation of aluminium chips: A new approach to overcome the inhomogeneous properties of the consolidated billet
Riccardo Puleo, Giuseppe Ingarao, Livan Fratini


Decoating operations for repurposing end-of-life (EOL) automotive metal sheets
Lorenzo MARINELLI, Daniele FARIOLI, Matteo STRANO


Comparative analysis of microstructure evolution and magnetic properties in strip-cast vs. Conventionally produced non-grain-oriented electrical steel
Dorothea Czempas, Sebastian Häner, Max Müller, David Bailly, Emad Scharifi


Life cycle assessment of metal additive manufacturing processes: A comparative study of bound metal deposition and binder jetting technologies
Iacopo Bianchi, Archimede Forcellese, Luciano Greco, Massimiliano Pieralisi, Tommaso Verdini, Alessio Vita


Gas forming of a deep drawn component for reshaping purposes
Antonio Piccininni, Emanuele Fulco, Angela Cusanno, Pasquale Guglielmi, Donato Sorgente, Gianfranco Palumbo


Optimizing sheet hydroforming process parameters with a focus on sustainability
Angela Cusanno, Luca Ciacci, Antonio Piccininni, Pasquale Guglielmi, Francesco Arfelli, Donato Sorgente, Gianfranco Palumbo


Injection compression molding of wood powder mixed with natural binder
Ryo Kawase, Takashi Kuboki, Shohei Kajikawa


Life cycle assessment applied to the cutlery sector in the case of steel-based production
Chiara de Pizzol, Davide Salandini, Paola Ginestra, Angela Daniela La Rosa


Influence of different oxide thicknesses on the friction induced and continuous solid-state recycling of aluminum scrap
Steffen Gabsa, Timothy Daniel Goller, Ansgar Nordieker, Werner Homberg, Guido Grundmeier


Evaluation of plasma cleaning efficiency for surface contaminant removal from AA7075 chips
Chenyang Han, Enrico Simonetto, Andrea Ghiotti, Stefania Bruschi


Eco-sustainable sandwich panels: Influence of process parameters on adhesion and mechanical performance
Gianluca Parodo, Costanzo Bellini, Vittorio Di Cocco, Francesco Iacoviello, Luca Sorrentino, Sandro Turchetta


Recycling magnesium alloy AZ31B chips via friction stir consolidation: A sustainable approach
Muhammad Adnan, Simone Amantia, Riccardo Puleo, Giuseppe Ingarao, Livan Fratini


Evaluation of the environmental impact of direct hot rolling, ECAP and FSE for aluminum chips recycling
Mauro CARTA, Pasquale BUONADONNA, Rayane El MOHTADI, Daniele LAI, Mohamad EL MEHTEDI


Mode-I fracture toughness of flax/epoxy composites: A comparative study of autoclave and oven curing techniques
Humberto Almeida Jr, Andraž Maček, Miroslav Halilovič