Terotechnology XI
Ed. Agnieszka Szczotok
Materials Research Proceedings Volume 17
Publication Date 2020, 288 Pages
Print ISBN 978-1-64490-102-1 (release date November, 2020)
ePDF ISBN 978-1-64490-103-8
DOI: 10.21741/9781644901038
The book focuses on the technology of installation, maintenance, replacement and removal of manufacturing machinery and transportation equipment. Areas covered include industrial management, reliability, technical diagnostics, materials science, design of experiments, tribology and technical safety.
Keywords
Terotechnology, Manufacturing Machinery, Transportation Equipment, Spool Control Valves, CFD Simulation, Turbine Nozzle Outlet, Foundry Simulation Codes, Risk Assessment, Flow Control Valves, Hydraulic Drive and Control Systems, Bearing Housing, Defects in Metal Matrix Composites, Controlling Cast Iron Foundry, Camouflage Colors, Erosion Blasting, Fuzzy Logic in Databases, Urban Traffic Noise, Machining of Metal Matrix Composites, Laser Cutting Methods, UV Laser Micro Machining, Simulation of Flow Control, Bearing Housing, Plasma Cutting, Electrical Discharge Machining, Decarburization of Rails, Bogie Frame Strength, Multi Sensor Detection System, DLC Coatings, Horizontal Meshed Heaters, Underground Composite Pressure Pipes, Diagnostic Process of Castings, Toxic Gases Emission, Floor Materials in Rolling Stock, Railway Rubber Products, Electric Cables and Wires, Anti-Graffiti Coatings, Defects in Rails, Screw Coupling 1MN, Laser Welding of Girth Joint, Combustion Chamber of a Piston
Table of Contents
Failure Prediction of Spool Control Valve using CFD Simulation
DOMAGALA Mariusz, BIKASS Saeed, FABIS-DOMAGALA Joanna, MOMENI Hassan and FILO Grzegorz
Matrix FMEA Analysis of a Spool Control Valve
FABIS-DOMAGALA Joanna, BIKASS Saeed, MOMENI Hassan, DOMAGALA Mariusz, FILO Grzegorz and KWIATKOWSKI Dominik
Improving the Non-Destructive Test by initiating the Quality Management Techniques on an Example of the Turbine Nozzle Outlet
SIWIEC Dominika, DWORNICKA Renata and PACANA Andrzej
The Conditions for Application of Foundry Simulation Codes to Predict Casting Quality
POPIELARSKI Paweł
The Ex Ante Risk Assessment in the Project in Interval Analysis Description
KOZIEN Ewa and KOZIEN Marek
Fluid-Structure Interaction Simulation of Flow Control Valve
DOMAGALA Mariusz, MOMENI Hassan, DOMAGALA-FABIS Joanna, SAEED Bikass, FILO Grzegorz and SHOKRI Azmin
The Concept of a Modular Integrated Test Stand for Testing Hydraulic Drive and Control Systems
GUZOWSKI Artur and SOBCZYK Andrzej
Analysis of the Quality of Bearing Housing and Improving the Method of Identifying the Root of Incompatibility
SIWIEC Dominika and PACANA Andrzej
Applying a Traditional Casting Defect Classification to Categorize Casting Defects in Metal Matrix Composites with Saturated Reinforcement
GAWDZIŃSKA Katarzyna, BRYLL Katarzyna, KOSTECKA Ewelina and STOCHŁA Dorota
Logistic Controlling Processes and Quality Issues in a Cast Iron Foundry
ULEWICZ Robert, MAZUR Magdalena, KNOP Krzysztof and DWORNICKA Renata
Assessment of the Technological Position of a Selected Enterprise in the Metallurgical Industry
KLIMECKA-TATAR Dorota and INGALDI Manuela
Selection and Verification of Camouflage Colors
PLEBANKIEWICZ Ireneusz, MAZURCZUK Robert and SZCZODROWSKA Bogusława
A Concept of Virtual Reality in Military Camouflage Application
Wojciech PRZYBYŁ, Ireneusz PLEBANKIEWICZ and Adam JANUSZKO
Shaping of Non-classical Cogbelt Pulleys using Selected Methods of Erosion Blasting
Piotr KRAWIEC
Implementation of Fuzzy Logic in Industrial Databases
KARPISZ Dariusz and KIEŁBUS Anna
Simulation and Assessments of Urban Traffic Noise by Statistical Measurands using mPa or dB(A) Units
BĄKOWSKI Andrzej and RADZISZEWSKI Leszek
Effect of Gas Laser Beam applied during Machining of Metal Matrix Composites Reinforced by Sic Particle
PRZESTACKI Damian, BARTKOWSKA Aneta, KUKLIŃSKI Mateusz, KIERUJ Piotr and SZYMAŃSKI Michał
Laser Cutting Methods – Review
KURP Piotr
The Micro Machining of Polypropylene by UV Laser – the Influence of Laser Operating Parameters
TOFIL Szymon
The Influence of Plasma Cutting Parameters on the Geometric Structure of Cut Surfaces
RADEK Norbert, PIETRASZEK Jacek, RADEK Mateusz and PARASKA Olga
Influence of Electrode Material on Surface Roughness during Die-Sinking Electrical Discharge Machining of Inconel 718
CHWALCZUK Tadeusz, FELUSIAK Agata, WICIAK-PIKUŁA Martyna and KIERUJ Piotr
Impact of Decarburization on the Hardness of the Rails Running Surface
MIKŁASZEWICZ Ireneusz
Influence of Surface Substrate Texture on the Properties of Al2O3 / IF-WS2 Surface Layers
KORZEKWA Joanna and GĄDEK-MOSZCZAK Aneta
The Impact of Residual Stresses on Bogie Frame Strength
KULKA Andrzej and BIŃKOWSKI Robert
Strength Testing of a Composite Mounting Frame for a Multi Sensor Detection System
KRYSIAK Piotr, SZCZEPANIAK Marcin, WOJCIESZYŃSKA Patrycja and JASIŃSKI Wiesław
Microstructure and Tribological Properties of DLC Coatings
RADEK Norbert, PIETRASZEK Jacek, SZCZOTOK Agnieszka, FABIAN Peter and KALINOWSKI Artur
Performance Analysis of Diamond Coated End Mill during Machining of Metal Matrix Composite
WICIAK-PIKUŁA Martyna, FELUSIAK Agata and KIERUJ Piotr
Verification of Correlations for Pool Boiling Heat Transfer on Horizontal Meshed Heaters
RADEK Norbert , ORMAN Łukasz J., PIETRASZEK Jacek and BRONČEK Jozef
Strength Testing and Ring Stiffness Testing of Underground Composite Pressure Pipes
KRYSIAK Piotr, OWCZAREK Radosław, BŁAŻEJEWSKI Wojciech and BŁACHUT Aleksander
Analysis of the Diagnostic Process of Castings used in Automotive
CZERWIŃSKA Karolina, PACANA Andrzej and ULEWICZ Robert
Influence of Irradiance Level on the Toxic Gases Emission During the Combustion of Materials used in Floor Constructions in Rolling Stock
MILCZAREK Danuta and DUSZYNSKA-ZAWADA Patrycja
Fire Properties of Railway Rubber Products
RADZISZEWSKA-WOLIŃSKA Jolanta and ŚWIETLIK Aneta
Fire and Smoke Properties of Electric Cables and Wires in Case of Different Geometric Structure and Composition
TARKA Izabela, PIERGIES Jakub and ŁYSZCZ Marta
Effectiveness of Anti-Graffiti Coatings used in Rolling Stock
GARBACZ Marcin and KOWALIK Paweł
The Laboratory Tests of the Embedded Block System with High Vertical Elasticity
ANTOLIK Łukasz and SIWIEC Jakub
Investigations of the Head Check Defects in Rails
KOWALCZYK Dariusz, ANTOLIK Łukasz, MIKŁASZEWICZ Ireneusz and CHALIMONIUK Marek
The Influence of Pulse Current Frequency on Selected Aspects of Heat Transfer during GTA Welding of 321 Steel
OSTROMĘCKA Małgorzata, KOLASA Andrzej and CZARNECKI Marcin
Tests and FEM Calculations for the Screw Coupling 1MN
KOWALCZYK Dariusz and RAGUS Izabela
Laser Welding of Girth Joint – Numerical Simulation and Experimental Investigation
DANIELEWSKI Hubert, SKRZYPCZYK Andrzej, PAŁA Tadeusz, FURMAŃCZYK Piotr, TOFIL Szymon and WITKOWSKI Grzegorz
Improvement of the Surface of the Combustion Chamber of a Piston using Selected Techniques of Production Organization
CZERWIŃSKA Karolina, DWORNICKA Renata and PACANA Andrzej
