Influence of Surface Substrate Texture on the Properties of Al2O3 / IF-WS2 Surface Layers
KORZEKWA Joanna and GĄDEK-MOSZCZAK Aneta
download PDFAbstract. Anodic oxidation of aluminum alloy in a ternary solution of SAS (sulfuric, adipic and oxalic acids) with inorganic fullerene-like tungsten disulfide (IF-WS2) is named in the article Al2O3/IF-WS2. The thickness, geometric structure of the surface (SGP) and the tribological properties such as friction coefficient of Al2O3/IF-WS2 junction with polieteroeteroketon filled with graphite, carbon fiber and PTFE (named PEEK/BG) were investigated. The influence of electrolysis time and temperature on the tribological properties of coatings was studied using 2k factorial design.
Keywords
Surface Layer, Nanomaterials, Nanoparticles, Tribological Properties
Published online , 7 pages
Copyright © 2020 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: KORZEKWA Joanna and GĄDEK-MOSZCZAK Aneta, Influence of Surface Substrate Texture on the Properties of Al2O3 / IF-WS2 Surface Layers, Materials Research Proceedings, Vol. 17, pp 152-158, 2020
DOI: https://doi.org/10.21741/9781644901038-23
The article was published as article 23 of the book Terotechnology XI
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] E.P. Degarmo, J.T. Black, R.A. Kohser, (2003), Materials and Processes in Manufacturing, Hoboken, Wiley, 2003.
[2] M. Kadlecková, A. Minarík, P. Smolka, A. Mrácek, E. Wrzecionko, L. Novák, L. Musilová, R. Gajdošík, Preparation of Textured Surfaces on Aluminum-Alloy Substrates, Materials 12 (2019) art. 109. https://doi.org/10.3390/ma12010109
[3] Yuankai Zhou, Hua Zhu, Wenqian Zhang, Xue Zuo, Yan Li and Jianhua Yang, Influence of surface roughness on the friction property of textured surface, Advances in Mechanical Engineering 1–9. https://doi.org/10.1177/1687814014568500
[4] V. Rodriguez, J. Sukumaran, M. Ando, P. De Baets, Roughness measurement problems in tribological testing, Sustainable Construction & Design 2 (2011) 115-121.
[5] P. Kwolek, Hard anodic coatings on aluminum alloys, Advances in Manufacturing Science and Technology 41 (2017) 35-46.
[6] N. Tsyntsaru, B. Kavas, J. Sort, M. Urgen, J.-P. Celis, Mechanical and frictional behaviour of nano-porous anodized aluminium, Materials Chemistry and Physics 148 (2014) 887-895. https://doi.org/10.1016/j.matchemphys.2014.08.066
[7] M. Bara, W. Skoneczny, S. Kaptacz, Tribological properties of ceramic-carbon surface layers obtained in electrolytes with a different graphite content. Maintenance and Reliability 40 (2008) 66-70.
[8] H. Ruiz-Luna, D. Lozano-Mandujano, J.M. Alvarado-Orozco, A. Valarezo, C.A. Poblano-Salas, L.G. Trapaga-Martinez, F.J. Espinoza-Beltran, J. Munoz-Saldana, Effect of HVOF Processing Parameters on the Properties of NiCoCrAlY Coatings by Design of Experiments, Journal of Thermal Spray Technology 23 (2014) 950-961. https://doi.org/10.1007/s11666-014-0121-2
[9] M. J. Anderson, P. J. Whitcomb, Design of Experiments for Coatings, Minneapolis, Stat-Ease, 2006. https://doi.org/10.1201/9781420044089.ch15
[10] P. Walczak, A. Sobczyk, Simulation of water hydraulic control system of Francis turbine. Proc. 8th FPNI Ph.D Symposium on Fluid Power, 2014, art. V001T04A001. https://doi.org/10.1115/FPNI2014-7814
[11] M. Domagala, H. Momein, J. Domagala-Fabis, G. Filo, M. Krawczyk, J. Rajda, Simulation of particle erosion in a hydraulic valve. Materials Research Proceedings 5 (2018) 17-24.
[12] J. Krawczyk, A. Sobczyk, J. Stryczek, P. Walczak, Tests of new methods of manufacturing elements for water hydraulics. Materials Research Proceedings 5 (2018) 200-205.
[13] A. Pacana, K. Czerwinska, R. Dwornicka, Analysis of non-compliance for the cast of the industrial robot basis, METAL 2019 28th Int. Conf. on Metallurgy and Materials (2019), Ostrava, Tanger 644-650. https://doi.org/10.37904/metal.2019.869
[14] Z. Ignaszak, P. Popielarski, T. Strek, Estimation of coupled thermo-physical and thermo-mechanical properties of porous thermolabile ceramic material using Hot Distortion Plus® test. Defect and Diffusion Forum 312-315 (2011) 764-769. https://doi.org/10.4028/www.scientific.net/DDF.312-315.764
[15] L. Dabek, A. Kapjor, L.J. Orman, Boiling heat transfer augmentation on surfaces covered with phosphor bronze meshes. MATEC Web of Conf. 168 (2018) art. 07001. https://doi.org/10.1051/matecconf/201816807001
[16] E. Skrzypczak-Pietraszek, J. Pietraszek, Phenolic acids in in vitro cultures of Exacum affine Balf. f. Acta Biol. Crac. Ser. Bot. 51 (2009) 62-62.
[17] E. Skrzypczak-Pietraszek, I. Kwiecien, A. Goldyn, J. Pietraszek, HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture. Phytochemistry Letters 20 (2017) 443-448. https://doi.org/10.1016/j.phytol.2017.01.009
[18] S. Wojciechowski, P. Twardowski, T. Chwalczuk, Surface Roughness Analysis after Machining of Direct Laser Deposited Tungsten Carbide, Met & Props 2013, 14th Int. Conf. on Metrology and Properties of Eng. Surf., Journal of Physics Conference Series 483 (2014) art. 012018. https://doi.org/10.1088/1742-6596/483/1/012018
[19] R. Dwornicka, N. Radek, M. Krawczyk, P. Osocha, J. Pobedza, The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model. METAL 2017 26th Int. Conf. on Metallurgy and Materials (2017), Ostrava, Tanger 1252-1257.
[20] Radek, N., Kurp, P., Pietraszek, J., Laser forming of steel tubes. Technical Transactions 116 (2019) 223-229. https://doi.org/10.4467/2353737XCT.19.015.10055
[21] A. Szczotok, D. Karpisz, Application of two non-commercial programmes to image processing and extraction of selected features occurring in material microstructure. METAL 2019: 28th Int. Conf. on Metallurgy and Materials, Ostrava, TANGER, 1721-1725. https://doi.org/10.37904/metal.2019.971
[22] J. Pietraszek, Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator. In: Rutkowski L., Kacprzyk J. (eds) Neural Networks and Soft Computing. Advances in Soft Computing, vol 19. Physica, Heidelberg: 2003, 250-255. https://doi.org/10.1007/978-3-7908-1902-1_35
[23] A. Pacana, M. Pasternak-Malicka, M., Zawada. A. Radon-Cholewa, Decision support in the production of packaging films by cost-quality analysis. Przem. Chem. 95 (2016) 1042-1044.
