Terotechnology XII
Ed. Norbert Radek
Materials Research Proceedings Volume 24
Publication Date 2022, 328 Pages
Print ISBN 978-1-64490-204-2 (release date August, 2022)
ePDF ISBN 978-1-64490-205-9
DOI: 10.21741/9781644902059
Terotechnology is concerned with the installation, commissioning, maintenance, replacement, and removal of plant machinery and equipment. It also includes operation and design aspects, and related subjects and practices.
Keywords
Flow Control Valve, Boiling Heat Transfer, Laser Treated Heaters, Laser Micro Machining, Surface Laser Micropatterning, Adhesive Joints, WC-Co Coatings, Diamond-Like Carbon Coatings, TiO2 Coatings, Weathering of Paint Systems. Rolling Stock, Cellular Automata, High Strength Concrete, Concrete Composites, Thermal Sensations, Intelligent Buildings, Sulphuric Acid, Corrosion Resistance of Coatings on Steel, Evaluating the Technological Modernity of Machines, Computer Simulation Techniques, Production Management, TNT Storage, Powder Metallurgy, Graphene Oxide, Rail Head Operational Crack, Aluminum Castings, Non-Destructive Testing, Automotive Industry Case Studies, Quality Assessment, Bearing Shell Casting, Rail Vehicles, Fuels in Rail Transport, Fire Hazard, Mobility Assessment for Tracked Vehicles, Laser Welding, Helical Metal Expansion Joints, Steel Joints, Flash Butt Welded Rail Joints, Gas Face Seals, Design Parameters of Ball Bearing, Neural Network Structure, Prescriptive Maintenance Strategy, Unmanned Aerial Vehicles, Urban Traffic Noise, Textile Cleaning Processes
Table of Contents
The Influence of Oil Contamination on Flow Control Valve Operation
DOMAGALA Mariusz, MOMENI Hassan and FABIS-DOMAGALA Joanna
Boiling Heat Transfer Performance of Pin-Fins During Boiling of Water and Ethanol
DZIEDZIC Joanna and CEDRO Martyna
Performance of Laser Treated Heaters in Pool Boiling
ORMAN Łukasz J., RADEK Norbert and DUDEK Agata
On the Method of Multi-Layer Laser Micro Machining
WITKOWSKI Grzegorz
Surface Laser Micropatterning of Polyethylene Terephthalate (PET) to Increase the Shearing Strength of Adhesive Joints
TOFIL Szymon, MANOHARAN Manikandan and NATARAJAN Arivazhagan
Laser Processing of WC-Co Coatings
RADEK Norbert, PIETRASZEK Jacek, BRONČEK Jozef , GONTARSKI Dariusz, SZCZOTOK Agnieszka, PARASKA Olga and MULCZYK Krystian
Characterization and Properties of Diamond-Like Carbon Coatings
KOWALCZYK Joanna, KĘCZKOWSKA Justyna and SUCHAŃSKA Małgorzata
Selection of Process Parameters for Laser Texturing of DLC Coatings
KALINOWSKI Artur, RADEK Norbert, SĘK Piotr, PIETRASZEK Jacek and ORMAN Łukasz
Properties of TiO2 Coatings Obtained by Atomic Layer Deposition (ALD) on the Ti13Nb13Zr Titanium Alloy
PIOTROWSKA Katarzyna and MADEJ Monika
Evaluation of the Influence of Laboratory Weathering of Paint Systems used in Rolling Stock on Selected Mechanical Properties
GARBACZ Marcin
Virtual Methods of Testing Automatically Generated Camouflage Patterns Created Using Cellular Automata
PRZYBYŁ Wojciech, MAZURCZUK Robert, SZCZEPANIAK Marcin, RADEK Norbert and MICHALSKI Marek
Nonlinear Analysis of Beams made of High Strength Concrete Prestressed with Unbonded Tendons
KOWALSKI Damian
The use of Polymer Recyclates in the Technology of Concrete Composites Production
PIETRZAK Alina
Sustainable Buildings – Thermal Sensations Case Study
DĘBSKA Luiza and KAPJOR Andrej
Traditional and Intelligent Buildings – Perceptions of Thermal Comfort
KRAWCZYK Natalia
Corrosion of the S235JR Carbon Steel after Normalizing and Overheating Annealing in 2.5% Sulphuric Acid at Room Temperature
LIPIŃSKI Tomasz and PIETRASZEK Jacek
The Influence of the Solvent on the Corrosion Resistance of Vinyltrimethoxysilane Based Coatings Deposited on X20Cr13 Steel
KUCHARCZYK Aleksandra, ADAMCZYK Lidia and MIECZNIKOWSKI Krzysztof
Evaluation of the Technological Modernity of the Machines used in the Metallurgical Industry
INGALDI Manuela and MAZUR Magdalena
The use of Computer Simulation Techniques in Production Management
KRYNKE Marek and KLIMECKA-TATAR Dorota
Analysis of the Physicochemical Properties of The Ti6Al4V Titanium Alloy Produced by the Plastic Working Method and the SLS Method
KIERAT Oliwia, DUDEK Agata and MOSKAL Grzegorz
Impact of TNT Storage Time on Its Physicochemical and Explosives Properties
DYLONG Agnieszka, DYSZ Karolina and KUBECKI Adam
Microstructure and Mechanical Properties of Powder Metallurgy Fe-Cu-Sn-Ni Alloys
BOROWIECKA-JAMROZEK Joanna and LACHOWSKI Jan
Study of the Impact of –NH2 Modification on Adsorptive Properties of Graphene Oxide
KWAK Anna, DYLONG Agnieszka and MALISZEWSKI Waldemar
Empirical Model of the Rail Head Operational Crack on the Example of a Head Check Defect
ANTOLIK Łukasz
The Model for Analyzing and Improving Aluminum Castings
CZERWIŃSKA Karolina, DWORNICKA Renata and PACANA Andrzej
Improving the Non-Destructive Testing Process of the Outer Bearing Ring
SIWIEC Dominika, DWORNICKA Renata and PACANA Andrzej
Solving Critical Quality Problems by Detecting and Eliminating their Root Causes – Case-Study from The Automotive Industry
KNOP Krzysztof and ULEWICZ Robert
Vickers Method Application for Quality Assessment the First Patterns of a Selected Product of the Automotive Industry – a Case Study
JAGUSIAK-KOCIK Marta and IDZIKOWSKI Adam
Analysis of the Causes of the Non-Conformity of the Bearing Shell Casting Used on Rail Vehicles
PACANA Andrzej, CZERWIŃSKA Karolina and DWORNICKA Renata
Improving the Quality of Products from Cast Alloy with the use of Grey Relational Analysis (GRA)
SIWIEC Dominika, DWORNICKA Renata and PACANA Andrzej
Alternative Fuels in Rail Transport and their Impact on Fire Hazard
RADZISZEWSKA-WOLIŃSKA Jolanta Maria
Comparative Analysis of the Mobility Assessment Methods for Tracked Vehicles
PARTYKA Jacek
Concept of Laser Welding of Concentric Peripheral Lap Joint
DANIELEWSKI Hubert and ZRAK Andrej
Ideas and Assumptions of a New Kind Helical Metal Expansion Joints
KURP Piotr
Microstructure and Mechanical Properties of Dissimilar Friction Welded B500B-1.4021 Steel Joint
OSTROMĘCKA Małgorzata
Testing of Flash Butt Welded Rail Joints
MIKŁASZEWICZ Ireneusz
Analysis of Pressure Distribution in Non-Contacting Impulse Gas Face Seals
BŁASIAK Slawomir and TAKOSOGLU Jakub
Influence of Operating Parameters and Selected Design Parameters of Ball Bearing on the Friction Torque
ADAMCZAK Stanisław, MAKIEŁA Włodzimierz and GORYCKI Łukasz
Locking Mechanism of a Slider with Self-Adjusting Backlash: Design and Dynamic Analysis
JASIŃSKI Wiesław, KRYSIAK Piotr and PICHLAK Cezary
Analysis of Neural Network Structure for Implementation of the Prescriptive Maintenance Strategy
FILO Grzegorz and LEMPA Paweł
Analysis of Neural Network Training Algorithms for Implementation of the Prescriptive Maintenance Strategy
LEMPA Paweł and FILO Grzegorz
Usage of Unmanned Aerial Vehicles in Medical Services: A Review
KOZIOŁ Anna and SOBCZYK Andrzej
Analysis of Urban Traffic Noise at Weekends – Case Study
RADZISZEWSKI Leszek, BĄKOWSKI Andrzej, BURDZIK Rafał and WARCZEK Jan
The Assessment of the Environmental Impact of Textile Cleaning Processes in the Aquatic Environment on Human Health
PARASKA Olga, IVANISHENA Tetiana, ZAKHARKEVICH Oksana, HES Lubos and RADEK Norbert
Development of the Mobile Application to Calculate Parameters of Underwear Patterns
ZAKHARKEVICH Oksana, KOSHEVKO Julia, SHVETS Galyna, KULESHOVA Svetlana, BAZYLIUK Elvira, PARASKA Olga and KAZLACHEVA Zlatina
