Residual Stresses 2018
ECRS-10
Ed. Marc Seefeldt
Materials Research Proceedings Volume 6
Publication Date 2018, 312 Pages
Print ISBN 978-1-945291-88-3 (release date October 5th, 2018)
ePDF ISBN 978-1-945291-89-0
DOI: 10.21741/9781945291890
The European Conference on Residual Stresses (ECRS) series is the leading European forum for scientific exchange on internal and residual stresses in materials. It addresses both academic and industrial experts and covers a broad gamut of stress-related topics from instrumentation via experimental and modelling methodology up to stress problems in specific processes such as welding or shot-peening, and their impact on materials properties.
Chapters: Diffraction Methods; Mechanical Relaxation Methods; Acoustic and Electromagnetic Methods; Composites, Nano and Microstructures; Films, Coatings and Oxides; Cold Working and Machining; Heat Treatments and Phase Transformations; Welding, Fatigue and Fracture: Stresses in Additive Manufacturing.
Keywords
Residual Stresses Determination, Internal Stresses in Materials, Diffraction Methods, Mechanical Relaxation Methods, Acoustic and Electromagnetic Methods, Composite Materials, Nanomaterials, Thin Films, Coatings, Oxides, Cold Working, Machining, Heat Treatment, Phase Transformations, Welding, Fatigue Stresses, Fracture: Stresses, Neutron Strain Scanning, Duplex Steel Bending, Plastic Deformation, X-Ray Micro-Diffraction, Submerged Arc Welding, Metal Cutting, Laser Cladding, Shot-Peened Tool Steel, Hole Drilling Stresses, Cast Iron, Thermal Surface Treatment, Mechanical Surface Treatment, Bones under Tensile Load, Synchrotron Diffraction Characterization, Oxide Scales on Stainless Steel, PVD Coating Stresses, Laser Local Quenching, Bending Fatigue, Bearing Fatigue Life, Weld Imperfections, Multi-Layer Welds, Nickel Based Superalloys, Laser Heat Treatment, Laser Beam Melting
Table of Contents (all papers are OPEN ACCESS / click on any title to see the full abstract and PDF)
Single Tilt Method for Residual Stress Evaluation with 2D Detectors
B.B. He
Use of Symmetry for Residual Stress Determination
R.C. Wimpory, M. Hofmann
Neutron Strain Scanning of Duplex Steel Subjected to 4-Point-Bending with Particular Regard to the Strain Free Lattice Parameter D0
S. Pulvermacher, J. Gibmeier, J. Saroun, J. Rebelo Kornmeier, F. Vollert, T. Pirling
Plastic Deformation of InSb Micro-Pillars: A Comparative Study Between Spatially Resolved Laue and Monochromatic X-Ray Micro-Diffraction Maps
T. Sadat, M. Verezhak, P. Godard, P.O. Renault, S. Van Petegem, V. Jacques, A. Diaz, D. Grolimund, L. Thilly
In-Situ Analysis of Material Modifications During Deep Rolling by Synchrotron X-Ray Diffraction Experiments
H. Meyer, J. Epp
Residual Stresses Induced in T Butt Welds from Submerged Arc Welding of High Strength Thick Section Steel Members
G.W. Sloan, S. Pearceb, V.M. Linton, X. Ficquet, E. Kingston, I. Brown
In-Situ Synchrotron X-Ray Diffraction Studies in the Chip Formation Zone During Orthogonal Metal Cutting
J. Gibmeier, D. Kiefer, R. Hofsaess, N. Schell
Development of Residual Stresses During Laser Cladding
A. Narayanan, M. Mostafavi, M. Pavier, M. Peeld
Round Robin Study on Residual Stresses Using X-Ray Diffraction for Shot-Peened Tool Steel Specimens
J. Holmberg, M. Palosaari, S. Hosseini, H. Larjosuo, P. Andersson
Convergence Behavior in Line Profile Analysis Using Convolutional Multiple Whole-Profile Software
M. Kumagai, T. Uchida, K. Murasawa, M. Takamura, Y. Ikeda, H. Suzuki, Y. Otake, T. Hama, S. Suzuki
High-Resolution Neutron Diffraction Setting for Studies of Macro- and Microstrains in Polycrystalline Materials
P. Mikula, M. Rogante, J. Šaroun, M. Vrána
Stress Measurements of Coarse Grain Materials using Double Exposure Method with Hard Synchrotron X-Rays
K. Suzuki, T. Shobu, A. Shiro
Study of Error Analysis and Sources of Uncertainty in the Measurement of Residual Stresses by the X-Ray Diffraction
E.T. Carvalho Filho, J.T.N. Medeiros, L.G. Martinez, V.C. Pinto
A Procedure for Plasticity Error Correction for Determination of Residual Stresses by the ESPI-HD Method
L. Lobanov, F.A.P. Fernandes, V. Savitsky
Hole Drilling Residual Stress Evaluations in Cast Iron
M. Lundberg, L. Elmquist
Residual Stresses in Railway Axles
Ř. Bohuslav, V. Jaroslav, N. Tomáš, D. Halabuk
Residual Stress Measurement of the Engineering Plastics by the Hole-Drilling Strain-Gage Method
A. Kohri, T. Mikami, Y. Suzuki
Micromagnetic Analysis of Residual Stress Distribution in 42CrMo4 Steel after Thermal and Mechanical Surface Treatment
I. Bobrov, J. Epp, H.-W. Zoch
In Situ Mechanical Behavior of Regenerating Rat Calvaria Bones Under Tensile Load via Synchrotron Diffraction Characterization
A. Zaouali, B. Girault, D. Gloaguen, F. Jordana, M.-J. Moya, P.-A. Dubos, V. Geoffroy, M. Schwartzkopf, T. Snow, H. Gupta, O. Shebanova, K. Schneider, B. Chang
Residual Stress Analysis in the Oxide Scales Formed on 316L Stainless Steel at 700 °C under Humid Air
L. Linwei, J. Vincent
Evaluation of Residual Stresses in PVD Coatings by means of Tubular Substrate Length Variation
H. Lille, A. Ryabchikov, J. Kõo, E. Adoberg, V. Mikli, J. Kübarsepp, P. Peetsalu
Distinguishing Effect of Buffing Operation on Surface Residual Stress Distribution and Susceptibility of 304L SS and 321 SS Welds to Chloride Induced SCC
P.S. Kumar, K. Mankari, S.G. Acharyya
Comparison of Different Methods of Residual Stress Determination of Cold-Rolled Austenitic-Ferritic, Austenitic and Ferritic Steels
J. Čapek, K. Trojan, J. Němeček, N. Ganev, K. Kolařík
Effects of Cutting Parameters on the Residual Stresses of SAE 1045 Steel after Turning
V.C. Pinto, E.T. de Carvalho Filho, J.T.N. de Medeiros
Characterization of Residual Stresses and Retained Austenite on 416 Stainless Steel via X-Ray Diffraction Techniques
T. Simmons, G. Grodzicki, J. Pineault, J. Taptich, M. Belassel, J. Nantais, M. Brauss
Comparison of Nondestructive Stress Measurement Techniques for Determination of Residual Stresses in the Heat Treated Steels
H. Hizli, C.H. Gür
Evolution of Microstructure and Residual Stress in Hot Rolled Ti-6Al-4V Plates Subjected to Different Heat Treatment Conditions
W. Rae, S. Rahimi
Influence of Surface Pretreatment on Residual Stress Field of Heat-Treated Steel Induced by Laser Local Quenching
Y. Sakaida, Y. Sasaki, H. Owashi
Residual Stress Formation in Component Related Stress Relief Cracking Tests of a Welded Creep-Resistant Steel
M. Rhode, A. Kromm, D. Schroepfer, J. Steger, T. Kannengiesser
In-Situ Determination of Critical Welding Stresses During Assembly of Thick-Walled Components made of High-Strength Steel
D. Schroepfer, A. Kromm, A. Hannemann, T. Kannengiesser
Reviewing the Influence of Welding Setup on FE-Simulated Welding Residual Stresses
S. Gkatzogiannis, P. Knoedel, T. Ummenhofer
Effect of Dengeling on Bending Fatigue Behaviour of Al Alloy 7050 and Comparison with Milling and Shot Peening
R.L. Peng, L. Selegård, M. Jonsson, M. Ess, G. Petersén
Analysis of Residual Stress State in Deep-Rolled HT-Bolts
J. Unglaub, J. Hensel, R. Wimpory, T. Nitschke-Pagel, K. Dilger, K. Thiele
Comparing the Influence of Residual Stresses in Bearing Fatigue Life at Line and Point Contact
T. Coors, F. Pape, G. Poll
Limitations and Recommendations for the Measurement of Residual Stresses in Welded Joints
T.N. Nitschke-Pagel
Experimental and Computational Analysis of Residual Stress and Mechanical Hardening in Welded High-Alloy Steels
N. Hempel, T. Nitschke-Pagel, J. Rebelo-Kornmeier, K. Dilger
Residual Stress Redistribution During Elastic Shakedown in Fillet Welded Plate
J.R. Chukkan, G. Wu, M.E. Fitzpatrick, X. Zhang, J. Kelleher
Modelling the Welding Process of an Orthotropic Steel Deck
E. Van Puymbroeck, N. Iqbal, H. De Backer
Strength Calculation of Stiffened Structures Taking Into Consideration Realistic Weld Imperfections
C. Stapelfeld, B. Launert, H. Pasternak, N. Doynov, V. Michailov
Contribution to Simplified Residual Stress Calculations of Multi-Layer Welds
J. Klassen, T. Nitschke-Pagel, K. Dilger
Residual Stresses in Selective Laser Melted Samples of a Nickel Based Superalloy
A. Kromm, S. Cabeza, T. Mishurova, N. Nadammal, T. Thiede, G. Bruno
Evaluation of In-Process Laser Heat Treatment on the Stress Conditions in Laser Metal Deposited Stellite® 21
G.L. Payne, I. Violatos, S. Fitzpatrick, D. Easton, J. Walker
Residual Stresses Analysis in AISI 316L Processed by Selective Laser Melting (SLM) Treated by Mechanical Post-Processing Treatments
Q. Portella, M. Chemkhi, D. Retraint
Analytical Model for Distortion Prediction in Wire + Arc Additive Manufacturing
J.R. Hönnige, P. Colegrove, S. Williams
An Analytical Method for Predicting Residual Stress Distribution in Selective Laser Melted/Sintered Alloys
D. Boruah, X. Zhang, M. Doré
Determination of the X-Ray Elastic Constants of the Ti-6Al-4V Processed by Powder Bed-Laser Beam Melting
N. Dumontet, G. Geandier, F. Galliano, B. Viguier, B. Malard
LinkedIn Post
