Investigation of electromechanical coupling characteristics of a double magnet system

Investigation of electromechanical coupling characteristics of a double magnet system

Andrzej Mitura, Krzysztof Kecik

Abstract. In this work, the experimental results of the electromechanical coupling coefficient identification are presented. The research covers two cases: test with a single magnet (I) and test with a double magnet, where two repelling magnets in one structure are connected (II). In case (I), the analytical description of the electromechanical coupling coefficient was determined. Whereas the analysis of case (II) confirms the superposition principle for interactions between both magnets and a single inductive coil. Finally, the presented analysis proposes some premises which will be used in the future to develop the model with two levitating magnets.

Keywords
Electromechanical Coupling, Energy Harvesting, Superposition

Published online , 6 pages
Copyright © 2023 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Andrzej Mitura, Krzysztof Kecik, Investigation of electromechanical coupling characteristics of a double magnet system, Materials Research Proceedings, Vol. 30, pp 55-60, 2023

DOI: https://doi.org/10.21741/9781644902578-8

The article was published as article 8 of the book Experimental Mechanics

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] M. Mosch, G. Fischerauer, A comparison of methods to measure the coupling coefficient of electromechanical vibration energy harvesters, Micromachines, 10 (2019) 0823. https://doi.org/10.3390/mi10120826
[2] K. Kecik, A. Mitura, J. Warminski, S. Lenci, Foldover effect and energy output a nonlinear pseudo-maglev harvester, AIP Conf. Proc., 1922 (2018) 100009. https://doi.org/10.1063/1.5019094
[3] B. Sungryong, K. Pilkee, Load resistance optimization of bi-stable electromagnetic energy harvester based on harmonic balance, Sensors, 21 (2021) 1505. https://doi.org/10.3390/s21041505
[4] G.D. Pasquale, A. Soma, F. Fraccorollo, Comparison between piezoelectric and magnetic strategies for wearable energy harvesting, J. Phys.: Conf. Ser., 476 (2013) 012097. https://doi.org/10.1088/1742-6596/476/1/012097
[5] A. Mitura, K. Kecik, Modeling and energy recovery from a system with two pseudo-levitating magnets, Bull. Pol. Acad. Sci. Tech. Sci., 70 (2022) e121721.
[6] K. Kecik, A. Mitura, S. Lenci, J. Warminski, Energy harvesting from a magnetic levitation system, Int. J. Non-linear Mech., 94 (2017) 200-206. https://doi.org/10.1016/j.ijnonlinmec.2017.03.021
[7] https://www.mathworks.com/help/matlab/ref/polyfit.html
[8] S. Hoffman, Estimation of prediction error in regression air quality models, Energies, 14 (2021) 7387. https://doi.org/10.3390/en14217387
[9] K. Kecik, Modification of electromechanical coupling in electromagnetic harvester, Energies, 15 (2022) 4007. https://doi.org/10.3390/en15114007