Microstructure and Tribological Properties of ESD Coatings after Laser Processing
RADEK Norbert, PIETRASZEK Jacek, SZCZOTOK Agnieszka
download PDFAbstract. The paper is concerned with determining the influence of the laser treatment process on the properties of electro spark coatings. The properties were assessed after laser treatment by analysing the microstructure, measuring the microhardness and friction coefficient. The tests were carried out for Mo and Cu coatings (the anode) electro-spark deposited over the C45 steel substrate (the cathode) and molten with a laser beam. The coatings were deposited by means of an ELFA-541. The laser treatment was performed with an Nd:YAG, BLS 720 laser. The coatings are desirable in sliding friction pairs.
Keywords
Electro-Spark Deposition, Laser Processing, Coatings, Properties
Published online 7/16/2018, 4 pages
Copyright © 2018 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: RADEK Norbert, PIETRASZEK Jacek, SZCZOTOK Agnieszka, ‘Microstructure and Tribological Properties of ESD Coatings after Laser Processing’, Materials Research Proceedings, Vol. 5, pp 206-209, 2018
DOI: https://dx.doi.org/10.21741/9781945291814-36
The article was published as article 36 of the book Terotechnology
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] I.V. Galinov, R.B. Luban, Mass transfer trends during electrospark alloying, Surface & Coatings Technology 79 (1996) 9-18. https://doi.org/10.1016/0257-8972(95)02434-4
[2] T. Chang-bin, L. Dao-xin, W. Zhan, G. Yang, Electro-spark alloying using graphite electrode on titanium alloy surface for biomedical applications, Applied Surface Science 257 (2011) 6364-6371. https://doi.org/10.1016/j.apsusc.2011.01.120
[3] B. Antoszewski, E. Evin, J. Audy, Study of the effect of electro-spark coatings on friction in pin-on-disc testing, Journal of Tribology-Transactions of the ASME 3 (2008) 253-262.
[4] N. Radek, A. Sladek, J. Broncek, I. Bilska, A. Szczotok, Electrospark alloying of carbon steel with WC-Co-Al2O3: deposition technique and coating properties, Advanced Materials Research 874 (2014) 101-106.
[5] N. Radek, E. Wajs, M. Luchka, The WC-Co electrospark alloying coatings modified by laser treatment, Powder Metallurgy and Metal Ceramics 47 (2008)197-201. https://doi.org/10.1007/s11106-008-9005-7
[6] N. Radek, J. Konstanty, Cermet ESD coatings modified by laser treatment. Archives of Metallurgy and Materials 57 (2012) 665-670. https://doi.org/10.2478/v10172-012-0071-y
[7] J. Pietraszek, N. Radek, K. Bartkowiak, Advanced statistical refinement of surface layer’s discretization in the case of electro-spark deposited carbide-ceramic coatings modified by a laser beam, Solid State Phenom. 197 (2013) 198-202. https://doi.org/10.4028/www.scientific.net/SSP.197.198
[8] N. Radek, J. Pietraszek, B. Antoszewski, The average friction coefficient of laser textured surfaces of silicon carbide identified by RSM methodology, Advanced Materials Research 874 (2014) 29-34. https://doi.org/10.4028/www.scientific.net/AMR.874.29
[9] R. Ulewicz, Hardening of steel X155CrVMo12-1 surface layer, Journal of the Balkan Tribological Association 21 (2015) 166-172.
[10] A. Dudek, L. Adamczyk, Properties of hydroxyapatite layers used for implant coatings, Optica Applicata 43 (2013) 143-151.
[11] A. Dudek, A. Wronska, L. Adamczyk, Surface remelting of 316 L+434 L sintered steel: microstructure and corrosion resistance, Journal Of Solid State Electrochemistry 18 (2014) 2973-2981. https://doi.org/10.1007/s10008-014-2483-2
