Tests of New Methods of Manufacturing Elements for Water Hydraulics
Justyna KRAWCZYK, Andrzej SOBCZYK, Jarosław STRYCZEK, Paweł WALCZAK
download PDFAbstract. The article presents a review of modern methods of producing hydraulic components that can work with water as a working medium. The presented technology of coating and production of plastic elements is an alternative to the currently used stainless steel construction. Large-scale testing of cylinders and valves made in coating technology has been carried out. Innovative methods for designing pumps made of plastic have been developed, and were confirmed by laboratory tests.
Keywords
Water Hydraulics, Hydraulic Cylinders, Hydraulic Pumps, Directional Control Valve, Coating, Plastic
Published online 7/16/2018, 6 pages
Copyright © 2018 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Justyna KRAWCZYK, Andrzej SOBCZYK, Jarosław STRYCZEK, Paweł WALCZAK, ‘Tests of New Methods of Manufacturing Elements for Water Hydraulics’, Materials Research Proceedings, Vol. 5, pp 200-205, 2018
DOI: https://dx.doi.org/10.21741/9781945291814-35
The article was published as article 35 of the book Terotechnology
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] W. Okularczyk, A. Sobczyk, Experimental investigations of guide rings made of UHMWPE and PTFE composite in water hydraulic systems, Proceedings of 5th FPNI PhD Symposium, Krakow (2008)
[2] J. Pobędza, A. Sobczyk, Modern coating used in high pressure water hydraulic components, Key Engineering Materials, Vol. 542, Advanced Materials in Machine Design, Trans Tech Publications Ltd., Zurich-Durnten (2013) 143-155.
[3] Kędzia Krzysztof: An algorithm for the determination of the control parameters of a multisource drive system, Technical Transactions, R. 114, vol. 3 (2017) 173 – 182.
[4] F. Conrad, J. Pobędza, A. Sobczyk, IT-Tools Concept for Simulation and Design of Water Hydraulic Mechatronic Test Facilities for Motion Control and Operation in Environmentally Sensitive Application Areas, Proceedings of ASME Intl Mechanical Engineering Congress IMECE´04: Fluid Power Systems and Technology. Vol. 2, New York (2004) 1 – 9. https://doi.org/10.1115/IMECE2004-62411
[5] A. Sobczyk, Water Hydraulics – the Industrial Perspective. Water Hydraulics. The Natural Choice, Bergen University College, Bergen, 2004, pp 34 – 67.
[6] A. Sobczyk, P. Walczak P, Selection of materials to fabricate pressure control valve components for water hydraulics systems application – selected aspects, Proceedings of 2011 International Salon of Hydraulics and Pneumatics – HERVEX, Calimanesti-Caciulata, (2011) 158 – 166.
[7] J. Pobedza, A. Sobczyk, Properties of high pressure water hydraulic components with modern coatings. Advanced Materials Research. Trans Tech Publications Ltd (2014)
[8] J. Stryczek, K. Biernacki, J. Krawczyk, J. Wołodźko, Application of plastics in the building of fluid power elements, Vìsnik Nacìonal’nogo Tehnìčnogo Unìversitetu Ukraïni “Kiïvs’kij Polìtehničnij Ìnstitut”, Journal of Mechanical Engineering of the National Technical University of Ukraine, nr 2 (2014) 5 – 11.
[9] K. Nering, K. Rup, Unsteady natural convection in micropolar nanofluids, Archives of Thermodynamics, Vol. 35, No. 3, (2014) 155 – 170.
[10] P. J. Gamez-Montero, P. Antoniak, R. Castilla, J. Freire, J. Krawczyk, J. Stryczek, E. Codina, Magnet-sleeve-sealed mini trochoidal-gear pump prototype with polymer composite gear, Energies, vol. 10, nr 10 (2017) 1 – 18. https://doi.org/10.3390/en10101458
[11] A. Sobczyk, P. Walczak P, New Approach in Simulation of Water Turbine Guide Apparatus Control System, Proceedings of the 7th FPNI PhD Symposium, Reggio Emilia, (2012) 981 – 991.
[12] P. Śliwiński, Influence of Water and Mineral Oil on the Leaks in Satellite Motor Commutation Unit Clearances. POLISH MARITIME RESEARCH 3 (95) Vol. 24 (2017) 58 – 67.
[13] A. Gawlik, J. Pobędza, A. Sobczyk, P. Walczak, Tests of directional poppet valves with DLC and CNC coatings for water hydraulic, International Scientific-Technical Conference: Hydraulics and Pneumatics, Wroclaw (2012) 519 – 531.
[14] J. Krawczyk, J. Stryczek, Designing of the gerotor pump body made of plastics Proceedings of ASME 2016 9th FPNI Ph.D. Symposium on Fluid Power [electronic paper], Florianópolis (2016). ASME, New York (2016) 1 – 6.
[15] J. Krawczyk, J. Stryczek, Construction and experimental research on plastic cycloidal gears used in gerotor pumps, 8th FPNI Ph.D Symposium on Fluid Power [electronic paper], Lappeenranta (2014). ASME,New York (2014) 1 – 6.
[16] A. Sobczyk, P. Walczak P, Simulation of Water Hydraulic Control System of Francis Turbine, ASME Proceedings of the 8th FPNI PhD Symposium, Lappeenranta (2014).
