Discussing of Deformation of Additive Manufacturing due to External Bending

Discussing of Deformation of Additive Manufacturing due to External Bending

Y.J. Lin, J.C. Wang, C.Y. Su, C.H. Yang

Abstract. Default and deformations are some of issues for Additive manufacturing, as known as the 3D printing. When it processes multilayer thin films stacking, this process will introduce higher residual stress that causes deformation. This phenomenon makes the product faulty such as delamination, crack and blisters. The reason could be included ununiformed casting, temperature, cubical contraction etc. However, it is not easily to seem the difference form the films in the present. For ceramic materials, if deformation was existed at interface between layers, the crack would appear after the sintering was completed. For elastic material, the film will be bended, if the structure of product is unstable or the thickness is not thick enough to resist bending. In order to observe the deformation from material, residual stress and external bending must be considered. The purpose of the present study is to find the best approximation of formula for 3D printing and to predict the residual stress for the products. Later, the producing process could be adjusted until the most deformation is eliminated. The methods for present study are considered for two multilayer formulas. One is derived from Hsueh’s closed-form, the anther is Timoshenko Theory. The results are combined simulation and experimental for two material and their accuracy is examined. Except considering the effect of the thermal stress, the acceptability of assuming for analyses in the 3D printing system is discussed.

Keywords
Additive-Manufacturing, 3D Printing, Ceramic, Multilayer, Residual Stress

Published online 12/22/2016, 6 pages
Copyright © 2016 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Y.J. Lin, J.C. Wang, C.Y. Su, C.H. Yang, ‘Discussing of Deformation of Additive Manufacturing due to External Bending’, Materials Research Proceedings, Vol. 2, pp 419-424, 2017

DOI: https://dx.doi.org/10.21741/9781945291173-71

The article was published as article 71 of the book Residual Stresses 2016

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Mustafa Megahed, Hans-Wilfried Mindt, Narcisse N’Dri, Hongzhi Duan, Olivier Desmaison, Metal additive-manufacturing process and residual stress modeling, Int. Materials and Manufacturing Innovation, (2016).
[2] R.H. Saul, Effect of GaAsx P1-x transition zone—GaAs substrates, J. Appl. 40, pp. 3272 (1969). https://doi.org/10.1063/1.1658174
[3] G.H. Olsen, M. Ettenberg, Calculate stresses in multilayered heteroepitaxial structures, J. Appl. 48, pp. 2543 (1977). https://doi.org/10.1063/1.323970
[4] C.H. Hsueh, Modeling of elastic deformation of multilayers due to residual stresses and external bending. J. Appl., pp. 9652 (2002).
[5] Jia-Chang Wang, A novel fabrication method of high strength alumina ceramic parts based on solvent-based slurry stereolithography and sintering, Int. J. Precis. Eng. Man., 14, (2013) 485 – 491. https://doi.org/10.1007/s12541-013-0065-3
[6] S. Timoshenko, Analysisof bi-metal thermostats, J. Opt. Soc. Amer., vol. 11, pp. 233-255 (1925). https://doi.org/10.1364/JOSA.11.000233
[7] A. Ni, D. Sherman, R. Ballarini, H. Kahn, B. Mi, S. M. Phillips, A. H. Heuer, Optimal design of multilayered polysilicon films for prescribed curvature, J. Materials Sci., vol. 38, pp. 4169 (2003). https://doi.org/10.1023/A:1026333707011
[8] Viktorov I.A., Rayleigh and lamb waves: physical theory and applications, Plenum Press, New York (1967). https://doi.org/10.1007/978-1-4899-5681-1