Evaluation of Residual Stress Determinations Conducted with Laser Ablation and Optical Displacement Measurement

Evaluation of Residual Stress Determinations Conducted with Laser Ablation and Optical Displacement Measurement

P. Weidmann, G. Pedrini, V. Martínez-García3, M. Wenzelburger, A. Killinger, S. Schmauder, R. Gadow, W. Osten

Abstract. The presented work is related to the determination of residual stresses in ceramic coatings, where the material removal is done by laser ablation and the occurring surface deformation is measured with digital holography. Insights into the underlying assumptions and calculations to determine the depth dependent stress values from extensive displacement measurements shall be given. Moreover, the inhomogeneous elastic material properties and deviations from idealized removal geometries (in this case holes and notches) have to be considered. To cover all involved fields, i.e. thermodynamics and continuum mechanics, numerical studies for conventional and laser hole drillings were conducted and the ablation process was simulated. As the laser cannot produce ideal cylindrical or rectangular geometries, appropriate mathematical approximations are applied to choose a representative profile of the removed material. Furthermore, the calculation of stresses based on full field displacement measurements is done with an own program in several depth increments. These calculations are based on numerical calibration data for the elastically inhomogeneous compound of coating and substrate. Especially notch-like forms of material removal, where case sensitive weighting functions are applied for evaluation, can lead to reliable results. The physical experiments were done on aluminium plates with applied alumina layers.

Keywords
Residual Stress, Optical Determination, Laser Ablation

Published online 12/22/2016, 6 pages
Copyright © 2016 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: P. Weidmann, G. Pedrini, V. Martínez-García3, M. Wenzelburger, A. Killinger, S. Schmauder, R. Gadow, W. Osten, ‘Evaluation of Residual Stress Determinations Conducted with Laser Ablation and Optical Displacement Measurement’, Materials Research Proceedings, Vol. 2, pp 323-328, 2017

DOI: https://dx.doi.org/10.21741/9781945291173-55

The article was published as article 55 of the book Residual Stresses 2016

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] P. Weidmann, U. Weber, S. Schmauder, and V. Martinez Garcia, “Investigation of Influence Factors on Residual Stress Determination within Coated Surfaces in Consideration of the Differential and Integral Method,” Advanced Materials Research, vol. 996, pp. 307–312, 2014. https://dx.doi.org/10.4028/www.scientific.net/amr.996.307
[2] M. Wenzelburger, D. Lopez, and R. Gadow, “Methods and application of residual stress analysis on thermally sprayed coatings and layer composites,” Surface and Coatings Technology, vol. 201, no. 5, pp. 1995–2001, 2006. https://dx.doi.org/10.1016/j.surfcoat.2006.04.040
[3] T. Kreis, Handbook of Holographic Interferometry. WILEY-VCH Verlag, 2004. https://dx.doi.org/10.1002/3527604154
[4] P. Weidmann, U. Weber, S. Schmauder, G. Pedrini, and W. Osten, “Numerical calculation of temperature and surface topology during a laser ablation process for ceramic coatings,” Meccanica, vol. 51, no. 2, pp. 279–289, 2016. https://dx.doi.org/10.1007/s11012-015-0220-2
[5] G. Schajer and T. Rickert, “Incremental Computation Technique for Residual Stress Calculations Using the Integral Method,” Experimental Mechanics, vol. 51, pp. 1217–1222, 2011. https://dx.doi.org/10.1007/s11340-010-9408-5
[6] G. S. Schajer and M. Steinzig, “Full-field calculation of hole drilling residual stresses from electronic speckle pattern interferometry data,” Experimental Mechanics, vol. 45, no. 6, pp. 526–532, 2005. https://dx.doi.org/10.1007/BF02427906
[7] G. Pedrini, V. Martinez-Garcia, P. Weidmann, M. Wenzelburger, A. Killinger, U. Weber, S. Schmauder, R. Gadow, and W. Osten, “Residual Stress Analysis of Ceramic Coating by Laser Ablation and Digital Holography,” Experimental Mechanics, Dec. 2015.
[8] ASTM837-13, Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method, no. E 837–13. ASTM, 2013.
[9] G. S. Schajer, “Measurement of Non-uniform Residual Stresses Using the Hole-Drilling Method. Part II – Practical Application of the Integral Method,” Transaction of the ASME, vol. 110, pp. 344–349, 1988. https://dx.doi.org/10.1115/1.3226060