Tailored Electromagnetic Wave Absorption Performance of Ni0.7Zn0.3 Fe2O4/Zeolite/CNT Composites: Influence of Single and Multilayer Structures

Tailored Electromagnetic Wave Absorption Performance of Ni0.7Zn0.3 Fe2O4/Zeolite/CNT Composites: Influence of Single and Multilayer Structures

Fadzidah MOHD IDRIS, Faisal bin Abdul RAHMAN, Muhammad Aqil Haziq bin Mohd ZAMRI, Ahmad Haziq bin Mohamed SABRI, Hatika KACO, Mohd Shamsul Ezzad SHAFIE

Abstract. The rapid advancement of wireless communication technologies creates more electromagnetic (EM) wave interference that deteriorates other equipment performance and pose risks to human health. Thus, it attracts researchers’ attention in designing and fabricating more EM wave absorber in reducing the unwanted signals. Traditional single-phase absorbers struggle to overcome Snoek’s limit to achieve thin and broadband absorption. To address this gap, this study introduces a novel structurally tailored multilayer composite by utilizing a unique combination of fillers of porous dielectric Zeolite to maximize impedance matching, carbon nanotubes synthesized by industrial mill scale waste to drive intense dielectric loss and magnetic Ni0.7Zn0.3Fe2O4 nanoparticles to provide strong high frequency magnetic dissipation. This research highlights the fabrication and reflection loss (RL) performance in both single-layer and multilayer composite materials. Different materials were used as fillers (Ni0.7Zn0.3Fe2O4, Zeolite and Carbon Nanotubes) while epoxy resin as polymer matrix. The single layer was fabricated using mixing method at thickness of 1 mm, 2 mm and 3 mm, while the multilayer was fixed at thickness 3 mm (1 mm sub layers) and tailored of different materials as impedance matching layer, absorbing layer and reflective layer. The materials properties and microwave characterization were analysed by using Field Emission Scanning Electron Microscope (FESEM) and Vector Network Analyzer (VNA) across the frequency range of 4 – 18 GHz. The single layer achieved a minimum RL of -14 dB at 10 GHz (thickness=3 mm), while significantly improved RL in multilayer structure. The multilayer structure composed of tailored impedance matching layer (zeolite), absorbing layer (carbon nanotubes) and reflective layer (Ni0.7Zn0.3Fe2O4) of thickness 3 mm with RL of -32 dB (14 GHz). This is due to enhanced impedance matching and internal multiple reflections within the layered structure. The results obtained demonstrate a highly competitive, green and geometrically optimized approach for advanced electromagnetic interference (EMI) mitigation applications.

Keywords
Microwave Absorber, Reflection Loss, Single Layer, Multilayer, Electromagnetic Interference

Published online 11/15/2026, 13 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Fadzidah MOHD IDRIS, Faisal bin Abdul RAHMAN, Muhammad Aqil Haziq bin Mohd ZAMRI, Ahmad Haziq bin Mohamed SABRI, Hatika KACO, Mohd Shamsul Ezzad SHAFIE, Tailored Electromagnetic Wave Absorption Performance of Ni0.7Zn0.3 Fe2O4/Zeolite/CNT Composites: Influence of Single and Multilayer Structures, Materials Research Proceedings, Vol. 74, pp 63-75, 2026

DOI: https://doi.org/10.21741/9781644904473-9

The article was published as article 9 of the book Composite Science and Technology

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] M.A. Salem, H.S. Lim, K.S. Diong, K.A. Alaghbari, C.C. Zarakovitis, S.F. Chien, Electromagnetic Field-Aware Radio Resource Management for 5G and Beyond: A Survey, Computers 14 (2025) 1-28. https://doi.org/10.3390/computers14020051
[2] J. Liu, R. Che, H. Chen, F. Zhang, F. Xia, Q. Wu, M. Wang, Microwave absorption enhancement of multifunctional composite microspheres with spinel Fe3O4 cores and anatase TiO2 shells, Small 8 (2012) 1214–21. https://doi.org/10.1002/smll.201102245
[3] C. Zhi, S. Zhang, H. Wu, Y. Ming, S. Shi, W.F. Lo, S. Meng, Y. Si, B. Fei, J. Huo, J. Hu, Perovskite nanocrystals induced core–shell inorganic–organic nanofibers for efficient energy harvesting and self-powered monitoring, ACS Nano 18 (2024) 9365–77. https://doi.org/10.1021/acsnano.3c09935
[4] Y. Yang, J. Cheng, F. Pan, S. Lu, X. Wang, L. Cai, H. Guo, H. Jiang, L. Li, J. Wang, Z. Xiu, H. Yu, W. Lu, Phragmites-derived magnetic carbon fiber with hollow assembly architecture toward fullcovered effective bandwidth at ku band. Carbon 213 (2023) 118228. https://doi.org/10.1016/j.carbon.2023.118228
[5] H. Pang, R. Sahu, J. Liu, Y. Fu, L. Huang, Y. Duan, I. Puri, Facile synthesis of a hierarchical multi-layered CNT-NiFe2O4@MnO2 composite with enhanced microwave absorbing performance, Applications of Surface Science (2021). https://doi.org/10.1016/j.apsusc.2021.152363
[6] M. Amini, M. Kamkar, A. Ghafarkhah, S. Ghaderi, M. Arjmand, Epoxy/CNTZn0.5Ni0.5Fe2O4 Multilayer Polymeric Nanocomposites for Electromagnetic Wave Absorption, Italian National Conference on Sensors (2021). https://doi.org/10.1109/SENSORS47087.2021.9639466
[7] F. Mohd Idris, M. I. Ruliza, I. H. K. Shah, N. A. Ashraf, A. I. Mohd Razif, M. S. E. Shafie, Z. M. Idris, Designing 3D Printed Electromagnetic Wave Absorber, Journal of Advanced Research Design 130 (2025) 80–93. https://doi.org/10.37934/ard.130.1.8092
[8] C.K. Lin, Y.J. Chiou, S.J. Tsou, C.Y. Chung, C.C. Chao, R.B. Yang, One pot self-assembling Fe@PANI core–shell nanowires for radar absorption application, Nanomaterials 13 (2023) 1100. https://doi.org/10.3390/nano13061100
[9] V.B. Bregar, Advantages of Ferromagnetic Nanoparticle Composites in Microwave Absorbers, IEEE Transactions On Magnetics 40 (2004) 1679-1684. https://doi.org/ 10.1109/TMAG.2004.826622
[10] J. Huo, L. Wang, H. Yu, Polymeric nanocomposites for electromagnetic wave absorption, Journal of Material Science 44 (2009) 3917-3927. https://doi.org/10.1007/s10853-009-3561-1
[11] J. Qiu, H. Shen, M. Gu, Microwave absorption of nanosized barium ferrite particles prepared using high energy ball milling, Powder Technol. 154 (2005) 116–119. https://doi.org/10.1016/j.powtec.2005.05.003
[12] H. Zheng, Y. Yang, M. Zhou, F. Li, Microwave absorption and Mössbauer studies of Fe3O4 nanoparticles, Hyperfine Interactions 189 (2009) 131-136. https://doi.org/10.1007/978-3-642-01370-6_16
[13] S.C. Chiu, H.C. Yu, Y.Y. Li, High electromagnetic wave absorption performance of silicon carbide nanowires in the Gigahertz range, J. Phys. Chem. C 114 (2010) 1947–1952. https://doi.org/10.1021/jp905127t
[14] Q. Zeng, D.W. Xu, P. Chen, Q. Yu, X.H. Xiong, H.R. Chu, Q. Wang, 3D graphene-Ni microspheres with excellent microwave absorption and corrosion resistance properties, J. Mater. Sci. Mater. Electron. 29 (2017) 2421–2433. https://doi.org/10.1007/s10854-017-8161-2
[15] Q. Liao, M. He, Y. Zhou, S. Nie, Y. Wang, S. Hu, H. Yang, H. Li, Y. Tong, Highly cuboid-shaped heterobimetallic metalorganic frameworks derived from porous Co/ZnO/C microrods with improved electromagnetic wave absorption capabilities, ACS Appl. Mater. Interfaces 10 (2018) 29136–29144. https://doi.org/10.1021/acsami.8b09093
[16] R. Shu, Z. Wan, J. Zhang, Y. Wu, Y. Liu, J. Shi, M. Zheng, Facile design of three-dimensional nitrogen-doped reduced graphene oxide/multi-walled carbon nanotube composite foams as lightweight and highly efficient microwave absorbers, ACS Appl. Mater. Interfaces 12 (2020) 4689–4698. https://doi.org/ 10.1021/acsami.9b16134
[17] M. Zhang, X. Fang, Y. Zhang, J. Guo, C. Gong, D. Estevez, F. Qin, J. Zhang, Ultralight reduced graphene oxide aerogels prepared by cation-assisted strategy for excellent electromagnetic wave absorption, Nanotechnology 31 (2020) 275707. https://doi.org/10.1016/j.carbon.2023.118435
[18] H. Wang, H. Ma, Highly enhanced electromagnetic wave absorption bandwidth based on reduced graphene oxide-Fe aerogel composites, Nanotechnology 31 (2020) 095711. https://doi.org/10.1088/1361-6528/ab59b4
[19] B. Wang, Q. Fu, Q. Song, Z. Yu, R. Riedel, In situ growth of B4C nanowires on activated carbon felt to improve microwave absorption performance, Appl. Phys. Lett. 116 (2020) 203101. https://doi.org/10.1063/5.0007332
[20] C. Ellison, J. Hoffman, D. Shekhawat, Comparison of microwave and conventional heating for CO2 desorption from zeolite, International Journal of Greenhouse Gas Control (2021) 103311. https://doi.org/10.1016/j.ijggc.2021.103311
[21] D. Mandal, B. Bhandari, S.V. Mullurkara, P.R. Ohodnicki, All-Around Electromagnetic Wave Absorber Based on Ni–Zn Ferrite, ACS Applied Materials & Interfaces 16 (2024) 33846-33854. https://doi.org/10.1021/acsami.4c06498
[22] X. Zhang, X. Zhang, H. Yuan, K. Li, Q. Ouyang, C. Zhu, S. Zhang, Y. Chen, CoNi nanoparticles encapsulated by nitrogendoped carbon nanotube arrays on reduced graphene oxide sheets for electromagnetic wave absorption, Chem. Eng. J. 383 (2020) 216–225. https://doi.org/10.1016/j.cej.2019.123208
[23] X. Jian, B. Wu, Y. Wei, S.X. Dou, X. Wang, W. He, N. Mahmood, Facile synthesis of Fe3O4/GCs composites and their enhanced microwave absorption properties, ACS Appl. Mater. Interfaces 8 (2016) 6101–6109. https://doi.org/10.1021/acsami.6b00388
[24] M.S. Mustaffa, R.S. Azis, N.H. Abdullah, I. Ismail, I.R. Ibrahim, An investigation of microstructural, magnetic and microwave absorption properties of multi-walled carbon nanotubes/Ni0.5Zn0.5Fe2O4, Sci Rep 9 (2019) 15523. https://doi.org/10.1038/s41598-019-52233-2
[25] F.M. Idris, K.A. Matori, I.R. Ibrahim, R. Nazlan, M.S.E. Shafie, Enhancing Microwave Absorbing Properties of Nickel-Zinc-Ferrite with Multi-walled Carbon Nanotubes (MWCNT) Loading at Higher Gigahertz Frequency, Malaysian Journal of Science Health & Technology 7 (2021) 1-7. https://doi.org/10.33102/mjosht.v7i1.151
[26] F. Wen, F. Zhang, Z. Liu, Investigation on Microwave Absorption Properties for Multiwalled Carbon Nanotubes/Fe/Co/Ni Nanopowders as Lightweight Absorbers, J. Phys. Chem. C 115 (2011) 14025–14030. https://doi.org/10.1021/jp202078p