Experimental Investigation of the Acoustical and Mechanical Properties of an Ultrasonic Attenuation Functionally Graded Composite

Experimental Investigation of the Acoustical and Mechanical Properties of an Ultrasonic Attenuation Functionally Graded Composite

Majid MOHAMMADI

Abstract. In this study, epoxy-alumina based composites were fabricated and tested to be used as ultrasonic attenuation back layers, with graded materials produced by varying alumina sizes (50, 100, 200 m) and volume fractions, in order to improve both the acoustic and mechanical properties. Significantly, the functionally graded materials (FGMs) possess much better ultrasonic attenuation %, showing an increase of up to 30% than uniform composites, attributed to the arrangement of graded layers which can well absorb acoustic energy, with improvement on particle-matrix adhesion as well as the modulus control inside the resin. By using scan electron microscopy (SEM), well-dispersed alumina particles were obtained within optimum content levels; thus, the agglomeration of particles inside the composites and the flaws within can be prevented. While mechanical testing demonstrated improvements in hardness and elastic modulus at less than 19% and 15% alumina content, respectively, performance decreased more than the above percentage due to the agglomerates formation of particles, as well as introduction of voids and pores inside the composites, but acoustic testing result indicated that up to 98% ultrasonic energy absorption can be found from the FGMs due to variety in impedance (sound waves and resin matrix with various densities), in comparison with other materials due to the interaction between particles and matrix in FGMs, as well as energy convert phenomena.

Keywords
Ultrasonic Attenuation, Functionally Graded Structure (FGMs), Polymer Reinforced Composite, Ultrasonic Transducer

Published online 11/15/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Majid MOHAMMADI, Experimental Investigation of the Acoustical and Mechanical Properties of an Ultrasonic Attenuation Functionally Graded Composite, Materials Research Proceedings, Vol. 74, pp 48-54, 2026

DOI: https://doi.org/10.21741/9781644904473-7

The article was published as article 7 of the book Composite Science and Technology

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] V.M. Mastronardi, A. Qualtieri, E. Boni, P. Tortoli, R. De Fazio, P. Visconti, M.T. Todaro, M. De Vittorio, Additive Manufacturing Electronics for Packaging High-Frequency Aluminum Nitride Piezoelectric Micromachined Ultrasonic Transducer Probes, Proceedings 97 (2024) 52. https://doi.org/10.3390/proceedings2024097052
[2] S. Sadeghpour, S.V. Joshi, C. Wang, M. Kraft, Novel phased array piezoelectric micromachined ultrasound transducers (pMUTs) for medical imaging, IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control 2 (2022) 194-202. https://doi.org/10.1109/OJUFFC.2022.3207128
[3] R. Hampson, D. Zhang, A. Gachagan, G. Dobie, Modelling and characterisation ultrasonic phased array transducers for pipe inspections. International Journal of Pressure Vessels and Piping 200 (2022) 104808. https://doi.org/10.1016/j.ijpvp.2022.104808
[4] C. Hou, Z. Li, C. Fei, X. Wei, Y. Yang, Y. Wang, Y. Quan, Y. Yang, Optimal design of ultrasonic transducer based on multi-layer backing with adjustable impedance, Ceramics International 50 (2024) 51693-51700. https://doi.org/10.1016/j.ceramint.2024.02.006
[5] M. Mohammadi, E. Taban, W.H. Tan, N.B.C. Din, A. Putra, U. Berardi, Recent progress in natural fiber reinforced composite as sound absorber material, Journal of Building Engineering 84 (2024) 108514. https://doi.org/10.1016/j.jobe.2024.108514
[6] M. Mohammadi, M.R. Ishak, M.T.H. Sultan, E.S. Zainudin, A comprehensive review of factors influencing the sound absorption properties of micro-perforated panel structures, Journal of Vibration Engineering & Technologies 13 (2025) 319. https://doi.org/10.1007/s42417-025-01849-y
[7] M. Mohammadi, M.R. Ishak, M.T. Hameed Sultan, E.S. Zainudin, Cutting-edge innovations in sound absorption properties of natural fiber reinforced polylactic acid composites, Journal of Reinforced Plastics and Composites 45 (2025) 2814-2853. https://doi.org/10.1177/07316844251352718
[8] M. Mohammadi, M. Rajabi, M. Ghadiri, Functionally graded materials (FGMs): A review of classifications, fabrication methods and their applications, Processing and Application of Ceramics 15 (2021) 319-343. https://doi.org/10.2298/PAC2104319M
[9] K. Shi, D. Hu, D. Li, G. Jin, Sound absorption behaviors of composite functionally graded acoustic structure under hydrostatic pressure. Applied Acoustics 211 (2023) 109474. https://doi.org/10.1016/j.apacoust.2023.109474
[10] B. Li, F.L. Zhou, J. Fan, B. Wang, L.W. Tan, Research on the Performance Optimization of Turbulent Self-Noise Suppression and Sound Transmission of Acoustic Windows Made from Functionally Graded Material, Archives of Acoustics (2023) 475-495. https://doi.org/10.24425/aoa.2023.146812