Simulation-Based Consequence Assessment of Ethylene Leakage from High-Pressure Primary Compressor Feed Line in Low-Density Polyethylene Production
Anis Farina MANSOR, Arina SAUKI, Iylia IDRIS, Dinie MUHAMMAD, Rushdan Ahmad ILYAS, Fakhrony Sholahudin ROHMAN, Abdul Aziz HAIRUDDIN, Ashraf AZMI
Abstract. Ethylene is a highly flammable feedstock used in low-density polyethylene (LDPE) production, and pressurized transfer systems present important safety concerns. This study evaluates accidental ethylene release from the primary compressor feed line in an LDPE process using Areal Locations of Hazardous Atmospheres (ALOHA) to estimate dispersion, flammable cloud extent, overpressure, and thermal radiation under representative operating scenarios. Leak diameters of 10 mm and 25 mm were analyzed at 200, 250, and 300 bar to represent small-to-moderate loss-of-containment cases in the compressor feed line. The results show that increasing pressure generally enlarges the hazardous zones, with the 10 mm leak at 300 bar producing a flammable threat distance of 117 m downwind. Although ALOHA is a consequence-modeling tool rather than a full risk model, the analysis provides a practical screening-level assessment of hazard severity for compressor feed-line releases in LDPE service.
Keywords
Ethylene Leakage, Primary Compressor Feed Line, High-Pressure Tubular Reactor, ALOHA Modeling, Consequence Assessment
Published online 11/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Anis Farina MANSOR, Arina SAUKI, Iylia IDRIS, Dinie MUHAMMAD, Rushdan Ahmad ILYAS, Fakhrony Sholahudin ROHMAN, Abdul Aziz HAIRUDDIN, Ashraf AZMI, Simulation-Based Consequence Assessment of Ethylene Leakage from High-Pressure Primary Compressor Feed Line in Low-Density Polyethylene Production, Materials Research Proceedings, Vol. 74, pp 40-47, 2026
DOI: https://doi.org/10.21741/9781644904473-6
The article was published as article 6 of the book Composite Science and Technology
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] K.M. Sundaram, M.M. Shreehan, E.F. Olszewski, Ethylene, Kirk-Othmer Encyclopedia of Chemical Technology (2010) pp. 1–39.
[2] P.M.M.V. Erdeghem, F. Logist, M. Heughebaert, C. Dittrich, J.F. Van Impe, Conceptual modelling and optimization of jacketed tubular reactors for the production of LDPE, Proc. 9th Int. Symp. Dynamics and Control of Process Systems (DYCOPS 2010) (2010) 419–424.
[3] N.M. Supion, I. Idris, A.M. Som, F.S. Rahman, R.A. Ilyas, A. Azmi, Low-density polyethylene simulated production in high pressure tubular reactor, Materials Today Proceedings (2023). https://doi.org/10.1016/j.matpr.2022.12.155
[4] D. Stoiljkovic, B. Damjanovic, J. Djordjevic, D. Spehar, S. Jovanovic, Compressed ethylene phase states and their importance for the production of low-density polyethylene, Hem. Ind. 60 (2006) 283–286.
[5] A. Azmi, S.A. Sata, F.S. Rohman, N. Aziz, Dynamic Optimization of Low-Density Polyethylene Production in Tubular Reactor Under Thermal Safety Constraint, Chemical Industry and Chemical Engineering Quarterly 27 (2021) 85-97. https://doi.org/10.2298/CICEQ190108027A
[6] LDPE Production from Ethylene (High-Pressure Tubular Process) Report LDPE E11A. (2021). https://cdn.intratec.us/docs/reports/previews/ldpe-e11a-b.pdf. Intratec.
[7] NOAA (1999) and EPA. ALOHA 5.2.3 Online Help, Office of Response and Restoration of the National Oceanic and Atmospheric Administration (NOAA) and Chemical Emergency Preparedness and Prevention Office (CEPPO) of the U.S. Environmental (EPA), Seattle, WA.
[8] U.S. Department of Energy Office of Environment, Safety and Health. (2004). ALOHA Computer Code Application Guidance for Documented Safety Analysis (DOE-EH-4.2.1.3-ALOHA Code Guidance).
[9] A.J. Da Silva Rodrigues, M.H.L.F. Da Silva, D.O. De Farias, M.M. Teixeira, M.F. De Brito Rocha, G.B. Lins, R.A. D’Emery, J.F. Da Silva, J. Da Silva Correia Neto, Risk reliability analysis, resulting from explosions in petrochemical industries: A case study using Aloha software, 2022 17th Iberian Conference on Information Systems and Technologies (CISTI) (2017) 1–6. https://doi.org/10.23919/cisti.2017.7975733
[10] R. Besiktas, H. Baltaci, B.O. Akkoyunlu, Simulation of the jet fire using Atmospheric Dispersion Modeling (ALOHA): a case study of natural gas pipeline in Istanbul, Türkiye. Atmosphere 15 (2024) 456. https://doi.org/10.3390/atmos15040456
[11] N.A. Khalid, M.Z.M. Tohir, M.S.M. Said, Consequence Simulation of Jet Fire Due to Leakage of Pipelines in a Natural Gas Power Plant in Malaysia, Perintis Ejournal 9 (2019) 15–29.
[12] Y. Zhou, G. Hu, J. Li, C. Diao, Risk assessment along the gas pipelines and its application in urban planning, Land Use Policy 38 (2013) 233–238. https://doi.org/10.1016/j.landusepol.2013.11.011
[13] H. Zhu, Z. Mao, Q. Wang, J. Sun, The Influences of Key Factors on the Consequences Following the Natural Gas Leakage from Pipeline, Procedia Engineering 62 (2013) 592–601. https://doi.org/10.1016/j.proeng.2013.08.104
[14] R. Jones, W. Lehr, D. Simecek-Beatty, M. Reynolds, ALOHA® (Areal Locations of Hazardous Atmospheres) 5.4.4: Technical Documentation Volume 43 of NOAA Technical Memorandum NOS-OR&R (Vol. 43). U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Office of Response and Restoration (2013)
[15] H. Shao, G. Duan, Risk quantitative calculation and ALOHA simulation on the leakage accident of natural gas power plant. Procedia Engineering 45 (2012) 352–359. https://doi.org/10.1016/j.proeng.2012.08.170
[16] N.M. Hanafiah, L. Zardasti, N. Yahaya, N.M. Noor, N. Hassan, A. Valipour, Comparison Study on human health and safety loss for rural and urban areas in monetary value subjected to gas pipeline failure, Journal of Environmental Science and Technology 8 (2015) 300–309. https://doi.org/10.3923/jest.2015.300.309
[17] S. Çetinyokuş, Determination of explosion, fire and toxic emission physical effect areas, Pamukkale University Journal of Engineering Sciences 23 (2017) 845–853. https://doi.org/10.5505/pajes.2016.90093
[18] S. Trahmawan, E.S. Siradj, J.F. Fatriansyah, Analysis Risk Based Inspection API 581 on LPG Spherical Tank at PT. XYZ, Journal of Materials Exploration and Findings 3 (2024) 172–180. https://doi.org/10.7454/jmef.v3i2.1069

