Rainwater Absorption Characteristics and Material Characterisation of Single-Ply Carbon/Epoxy Composite

Rainwater Absorption Characteristics and Material Characterisation of Single-Ply Carbon/Epoxy Composite

N.G. MACHAVA, K.J. WONG, A.B. CHAI, K.Y. TSHAI, K.W. GAN

Abstract. This study investigates the moisture absorption behaviour and thermal response of single-ply carbon/epoxy composites subjected to rainwater immersion under ambient conditions. Over a 74-day period, the composite reached a maximum moisture content of 1.023%, exhibiting non-Fickian diffusion characteristics. Moisture uptake was modelled using both conventional Fickian and thickness-dependent non-Fickian approaches, with the latter providing a better fit to the experimental data. Field emission scanning electron microscopy (FESEM) revealed no significant microstructural changes or fibre-matrix debonding, suggesting that capillary action along the interface is not a contributing factor to the observed non-Fickian behaviour. Dynamic mechanical analysis (DMA) showed a 5.67 °C increase in glass transition temperature (Tg), rising from 146.25 °C to 151.92 °C after immersion. This shift indicates potential post-curing or secondary crosslinking effects induced by moisture exposure, which may enhance the thermal stability of the composite. These findings offer valuable insights into the environmental durability of thin carbon/epoxy laminates and support the development of predictive models for moisture-induced ageing in composite structures, particularly in applications exposed to natural weathering conditions.

Keywords
Carbon/epoxy Composite, Rainwater Immersion, Non-Fickian, Field Emission Scanning Electron Micrograph, Dynamic Mechanical Analysis

Published online 11/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: N.G. MACHAVA, K.J. WONG, A.B. CHAI, K.Y. TSHAI, K.W. GAN, Rainwater Absorption Characteristics and Material Characterisation of Single-Ply Carbon/Epoxy Composite, Materials Research Proceedings, Vol. 74, pp 24-31, 2026

DOI: https://doi.org/10.21741/9781644904473-4

The article was published as article 4 of the book Composite Science and Technology

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Y. Du, Y. Ma, W. Sun, Z. Wang, Effect of hygrothermal aging on moisture diffusion and tensile behavior of CFRP composite laminates, Chinese Journal of Aeronautics (2023) 36(3) 382-392. https://doi.org/10.1016/j.cja.2022.11.022
[2] M. Johar, W.W.F. Chong, K.J. Wong, Moisture absorption and tensile behaviour of hybrid carbon/flax composites, Fibers Polym. (2023) 24(5) 1799-1810. https://doi.org/10.1007/s12221-023-00157-0
[3] A. Karimzadeh, M.Y. Yahya, M.N. Abdullah, K.J. Wong, Effect of stacking sequence on mechanical properties and moisture absorption characteristic of hybrid PALF/glass fiber composites, Fibers and Polymers (2020) 21(7) 1583-1593. 10.1007/s12221-020-9640-2
[4] M. Massou, N. Babu, G. Xian, Experimental study on the mechanical properties of CFRP/epoxy composite plates under seawater immersion, Structures (2023) 54 48-57. https://doi.org/10.1016/j.istruc.2023.05.042
[5] E.O. Ogunsona, M. Misra, A.K. Mohanty, Accelerated hydrothermal aging of biocarbon reinforced nylon biocomposites, Polymer Degradation and Stability (2017) 139 76-88. https://doi.org/10.1016/j.polymdegradstab.2017.03.013
[6] Q. Xu, F. Li, W. Mu, J. Na, W. Tan, G. Wang, Effect of hygrothermal and alternating load coupled aging on CFRP/Al bonded joints, International Journal of Adhesion and Adhesives (2021) 109 102912. https://doi.org/10.1016/j.ijadhadh.2021.102912
[7] S.F. Mad Asasaari, K.J. Wong, M.N. Tamin, M. Johar, Moisture absorption effects on the mechanical properties of carbon/epoxy composites, International Journal of Structural Integrity (2020) 11(4) 605-614. https://doi.org/10.1108/IJSI-12-2019-0136
[8] K.J. Wong, H.A. Israr, M.N. Tamin, Characterisation of moisture absorption effects on the strength of composite materials, Advanced Materials Research (2015) 1125 69-73. 10.4028/www.scientific.net/AMR.1125.69
[9] E. Pérez-Pacheco, J.I. Cauich-Cupul, A. Valadez-González, P.J. Herrera-Franco, Effect of moisture absorption on the mechanical behavior of carbon fiber/epoxy matrix composites, J. Mater. Sci. (2013) 48 1873-1882. https://doi.org/10.1007/s10853-012-6947-4
[10] C.-H. Shen, G.S. Springer, Moisture absorption and desorption of composite materials, Journal of Composite Materials (1976) 10(1) 2-20. https://doi.org/10.1177/002199837601000101.
[11] C.-H. Shen, G.S. Springer, Effects of moisture and temperature on the tensile strength of composite materials, Journal of Composite Materials (1977) 11(1) 2-16. https://doi.org/10.1177/002199837701100102.
[12] C.-H. Shen, G.S. Springer, Environmental effects on the elastic moduli of composite materials, Journal of Composite Materials (1977) 11(3) 250-264. https://doi.org/10.1177/002199837701100301.
[13] K.J. Wong, K.O. Low, H.A. Israr, M.N. Tamin, Thickness-dependent non-Fickian moisture absorption in epoxy molding compounds, Microelectronics Reliability (2016) 65 160-166. https://doi.org/10.1016/j.microrel.2016.08.014
[14] M. Johar, H.S. Kang, W.W.F. Chong, K.J. Wong, A further generalized thickness-dependent non-Fickian moisture absorption model using plain woven epoxy composites, Polymer Testing (2018) 69 522-527. https://doi.org/10.1016/j.polymertesting.2018.06.013
[15] A. Azizan, M. Johar, S.S. Karam Singh, S. Abdullah, S.S. Koloor, M. Petrů, K.J. Wong, M.N. Tamin, An Extended Thickness-Dependent Moisture Absorption Model for Unidirectional Carbon/Epoxy Composites, Polymers (2021) 13(3) 440. 10.3390/polym13030440
[16] K.O. Low, S.M. Teng, M. Johar, H.A. Israr, K.J. Wong, Mode I delamination behaviour of carbon/epoxy composite at different displacement rates, Compos. Part B-Eng. (2019) 176 107293. https://doi.org/10.1016/j.compositesb.2019.107293
[17] K.O. Low, M. Johar, H.A. Israr, K.W. Gan, S.S. Rahimian Koloor, M. Petrů, K.J. Wong, Displacement rate effects on the mode II shear delamination behavior of carbon fiber/epoxy composites, Polymers (2021) 13(11) 1881. 10.3390/polym13111881
[18] K.O. Low, M. Johar, A.N. Sung, M.N. Mohd Nasir, S.S. Rahimian Koloor, M. Petrů, H.A. Israr, K.J. Wong, Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites, Polym. Test. (2022) 108 107512. https://doi.org/10.1016/j.polymertesting.2022.107512
[19] K.J. Wong, M. Johar, S.S. Koloor, M. Petrů, M.N. Tamin, Moisture absorption effects on mode II delamination of carbon/epoxy composites, Polymers (2020) 12(9) 2162. https://doi.org/10.3390/polym12092162
[20] A. Fick, Über diffusion, Poggendorff’s Annalen der Physik und Chemie (1855) 94 59-86. https://doi.org/10.1002/andp.18551700105.
[21] B. Hassanpour, V.M. Karbhari, Moisture and Glass Transition Temperature Kinetics of Ambient-Cured Carbon/Epoxy Composites, J. Compos. Sci. (2023) 7(11) 447. https://doi.org/10.3390/jcs7110447
[22] P. Ghabezi, N.M. Harrison, Hygrothermal deterioration in carbon/epoxy and glass/epoxy composite laminates aged in marine-based environment (degradation mechanism, mechanical and physicochemical properties), J. Mater. Sci. (2022) 57(6) 4239-4254. 10.1007/s10853-022-06917-2