Mechanical Characteristics of Virgin/Recycled Polypropylene-Wood Composites with Different Wood Species and Content
Indah WIDIASTUTI, Bagas Ade Emas Saka Putra
Abstract. This study investigates the effects of wood fibre type (hardwood/teakwood and softwood/albizia), polymer matrix type (virgin polypropylene/v-PP and recycled polypropylene/ r-PP), and fibre-to-matrix mass fraction on the hardness characteristics of wood–plastic composites (WPCs). A full-factorial experimental design with three factors at two levels was employed. Composite specimens were fabricated via a two-step process involving extrusion followed by injection moulding. Hardness measurements were conducted in accordance with ASTM D2240 (Shore D), and morphological analysis was performed using scanning electron microscopy (SEM). The results indicate that the combination of softwood Albizia fibres with virgin polypropylene at a composition of 60 % fibre to 40 % matrix achieved the highest hardness value of 80.1 Shore D. Analysis of variance (ANOVA) confirmed that all three independent variables exerted statistically significant effects on WPC hardness. Furthermore, SEM micrographs revealed that strong interfacial bonding between the fibres and the matrix was a key factor contributing to improved hardness performance. This study offers valuable insights for optimizing WPC formulations and supports the development of sustainable composite materials utilizing wood wastes and recycled plastics to achieve superior mechanical properties while promoting environmental sustainability.
Keywords
Wood Plastic Composite, Hardness, Morphological Characteristics, Recycled Polypropylene
Published online 11/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Indah WIDIASTUTI, Bagas Ade Emas Saka Putra, Mechanical Characteristics of Virgin/Recycled Polypropylene-Wood Composites with Different Wood Species and Content, Materials Research Proceedings, Vol. 74, pp 16-23, 2026
DOI: https://doi.org/10.21741/9781644904473-3
The article was published as article 3 of the book Composite Science and Technology
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] M.B. Waluyo, S.T. Kismanti, Sanudin, Pemanfaatan Limbah Plastik Sebagai Penguat pada Material Komposit Bermatriks Epoxy, Al Jazari: Jurnal Ilmiah Teknik Mesin 8 (2023) 94–98. https://doi.org/10.31602/al-jazari.v8i2.12764
[2] A. Yousaf, A. Al Rashid, R. Polat, M. Koç, Potential and challenges of recycled polymer plastics and natural waste materials for additive manufacturing, Sustainable Materials and Technologies 41 (2024) e01103. https://doi.org/10.1016/j.susmat.2024.e01103
[3] T. Boonsri, S. Rukchonlatee, I. Jangchud, Wood plastic composites (WPCs) from multilayer packaging wastes and rHDPE as pallets for green industry, IOP Conf Ser Mater Sci Eng. 1234 (2022) 012022. https://doi.org/10.1088/1757-899x/1234/1/012022
[4] T.L. Ing, W.R. Pahlevi, Studi Penggunaan Plastik Polypropylene pada Campuran Asphalt Concrete-Wearing Course, Cantilever: Jurnal Penelitian dan Kajian Bidang Teknik Sipil 8 (2019) 65–71. https://doi.org/10.35139/cantilever.v8i2.13
[5] I.O. Ohijeagbon, A.A. Adeleke, V.T. Mustapha, J.A. Olorunmaiye, I.P. Okokpujie, P.P. Ikubanni, Development and characterization of wood-polypropylene plastic-cement composite board, Case Studies in Construction Materials 13 (2020) e00365. https://doi.org/10.1016/j.cscm.2020.e00365
[6] D. Holzer, M. Popowicz, R. Rauter, K. Silberschneider, T. Stern, Parallel universes, one circular goal: An empirical study comparing Austrian wood- and plastic-based industries, Sustain Prod Consum. 43 (2023) 46–61. https://doi.org/10.1016/j.spc.2023.10.014
[7] R. Sidik, Studi Pengaruh Penambahan Polypropylene dan Low Density Polyethylene Terhadap Sifat Fisik dan Mekanik Wood Plastic Composite Untuk Aplikasi Genteng Ramah Lingkungan, Institut Teknologi Sepuluh Nopember, pp. 1–112, 2018
[8] K. Alokabel, A. D. Betan, Pengaruh Variasi Serbuk Kayu Terhadap Sifat Mekanis Material Komposit, TAPAK (Teknologi Aplikasi Konstruksi): Jurnal Program Studi Teknik Sipil 8 (2019) 150–154. https://doi.org/10.24127/tp.v8i2.951
[9] D.D. Wacono, S. Sulardjaka, Pengaruh Persentase Berat Serbuk Sic Terhadap Sifat Fisik Dan Sifat Mekanik Komposit Dengan Matrik Alsitib Yang Diperkuat Serbuk Sic, Jurnal Teknik Mesin S-1 2 (2014) 239–248.
[10] A.K. Yadav, R. Srivastava, Selection of teak sawdust polypropylene composite’s composition for outdoor applications using TOPSIS analysis, Sadhana – Academy Proceedings in Engineering Sciences 45 (2020) 1–12. https://doi.org/10.1007/s12046-020-01435-w
[11] B. Effah, A. Van Reenen, M. Meincken, Mechanical properties of wood-plastic composites made from various wood species with different compatibilisers, European Journal of Wood and Wood Products 76 (2018) 57–68. https://doi.org/10.1007/s00107-017-1186-7
[12] S.G. Nukala, I. Kong, A.B. Kakarla, K.Y. Tshai, W. Kong, Preparation and Characterisation of Wood Polymer Composites Using Sustainable Raw Materials, Polymers (Basel) 14 (2022) 1–18. https://doi.org/10.3390/polym14153183
[13] Y.M. Lopez, J.B. Paes, F.G. Gonçalves, E.M. Rodríguez, P.N. de M. Neto, Physico-mechanical properties of wood-plastic produced with forest species and thermoplastic materials, Floresta e Ambiente 27 (2020) e20170736. https://doi.org/10.1590/2179-8087.073617
[14] R. Desiasni, N. Azman, F. Widyawati, Sifat fisik dan mekanik komposit papan partikel berdasarkan variasi ukuran serbuk kayu mahoni (Swietenia Macrophylla) sebagai material alternatif: papan komposit, Jurnal Tambora 7 (2023) 78–83. https://doi.org/10.35139/cantilever.v8i2.13
[15] N. Hongsriphan, Polymer Chemistry, Polymer Chemistry (POL-1165), pp.1217–1222, 2016.
[16] A.D. Laksono, Basyaruddin, N. Adlina, Pengaruh Perlakuan Alkalisasi Serat Alam Kayu Bangkirai (Shorea Laevifolia Endert) pada Sifat Mekanik Komposit dengan Matriks Poliester, Jurnal Sains Terapan 5 (2019) 60–66. https://doi.org/10.32487/jst.v5i2.672
[17] M.H.S. Ginting, N.H. Siregar, F. Suwito, B. Tanujaya, “Pengaruh komposisi kulit kerang darah (Anadara granosa) terhadap kerapatan, keteguhan patah komposit partikel poliester, Prosiding Semnastek (2016) 1–7.
[18] N.A.T. Fadhly, I.Hs. Bahruddin, Pengaruh Nisbah Polypropylene/Serat Pelepah Sawit Dan Kadar Maleated Polypropylene (MAPP) Terhadap Sifat Dan Morfologi Wood Plastic Composites (WPC), Riau University, pp. 1–9, 2015.
[19] M.R. Hossain, F. Hossain, M. A. Islam, Effects of Wood Properties on the Behaviors of Wood Particle Reinforced Polymer Matrix Composites, Journal of Scientific Research 6 (2014) 431–443. https://doi.org/10.3329/jsr.v6i3.15811

