Insight on Mechanical Properties of Hybrid Graphene/Glass/ABS Nanocomposites
Anahar Nurul Aina, Muhammad Asyraf Muhammad Rizal, Muhamad Fauzi Abd Rased, Rohah A. Majid, Desmond Daniel Chin Vui Sheng, Amer Iskandar Ra’eis, Noryani Muhammad
Abstract. Glass fibre-reinforced acrylonitrile butadiene styrene (ABS) composites modified with graphene nanoplatelets (GNPs) have gained attention as a potential alternative to conventional thermoset-based glass fibre composites, particularly for applications requiring impact resistance, repairability, and sustainability. This review discusses the mechanical performance of hybrid graphene/glass/ABS nanocomposites by focusing on the roles of ABS as the thermoplastic matrix, woven glass fibre and glass fibre mesh as reinforcement phases, and GNPs as nano-scale additives. Reported preparation routes commonly involve melt blending or extrusion of ABS with GNPs, followed by laminate fabrication using glass fibre reinforcement through hot compression moulding or related thermoplastic processing techniques. Previous studies have shown that graphene-based reinforcement can increase tensile strength by 16–28% and improve flexural modulus by up to 42%, depending on filler type, loading, dispersion quality, and fibre–matrix interaction. For ABS/GNP composites, GNP loadings of 0.1–2.0 wt.% have been investigated, with 0.2-0.5 wt.% reported as an effective loading for improving fatigue-related performance. Studies on mesh-reinforced composite systems have also reported strength improvement from 86 MPa to 110 MPa, while fibreglass mesh sizes of 1 mm², 3 mm², and 5 mm² have been considered for thermoplastic ABS-based composites. Overall, the reviewed literature indicates that the combined use of ABS, glass fibre reinforcement, glass fibre mesh, and GNPs can improve stiffness, strength, impact resistance, stress transfer, and damage tolerance in hybrid thermoplastic composite systems for aerospace-related applications.
Keywords
Mesh, Woven, Glass Fibre, Acrylonitrile Butadiene Styrene, Graphene
Published online 11/15/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Anahar Nurul Aina, Muhammad Asyraf Muhammad Rizal, Muhamad Fauzi Abd Rased, Rohah A. Majid, Desmond Daniel Chin Vui Sheng, Amer Iskandar Ra’eis, Noryani Muhammad, Insight on Mechanical Properties of Hybrid Graphene/Glass/ABS Nanocomposites, Materials Research Proceedings, Vol. 74, pp 9-15, 2026
DOI: https://doi.org/10.21741/9781644904473-2
The article was published as article 2 of the book Composite Science and Technology
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] A. kordi, S. Adibnazari, A. Imam, M. Najafi, Effects of two- and three-dimensional graphene-based nanomaterials on the fatigue behavior of epoxy nanocomposites, Mater. Today Commun. 24 (2020) 101194. https://doi.org/10.1016/j.mtcomm.2020.101194
[2] M. Song, X. Li, S. Kitipornchai, Q. Bi, J. Yang, Low-velocity impact response of geometrically nonlinear functionally graded graphene platelet-reinforced nanocomposite plates, Nonlinear Dyn. 95 (2019) 2333–2352. https://doi.org/10.1007/s11071-018-4695-y
[3] F. Zaccardi, E. Toto, F. Marra, M.G. Santonicola, S. Laurenzi, Hybrid Carbon Nanocomposites Made of Aerospace-Grade Epoxy Showing Synergistic Effects in Electrical Properties and High Processability, Polymers (Basel). 15 (2023) 1163. https://doi.org/10.3390/polym15051163
[4] K. Malik, F. Ahmad, N.A. Yunus, P.S.M.M. Yusoff, B. Guan, N. Nosbi, S. Ali, T. Nakato, E. Mouri, The effects of graphene hybridization on mechanical properties of GFRP composites, in: 2021: p. 020023. https://doi.org/10.1063/5.0072598
[5] S. Hassanifard, K. Behdinan, Fatigue response of multiscale extrusion-based additively manufactured acrylonitrile butadiene styrene-graphene nanoplatelets composites, Compos. Part B Eng. 279 (2024) 111464. https://doi.org/10.1016/j.compositesb.2024.111464
[6] A.N. Aina, M.A.M. Rizal, M.F.A. Rased, S.A. Hassan, L.F. Ng, L. Rajeshkumar, R.A. Ilyas, H.A. Israr, Fiber-Reinforced Thermoplastic Composites for Future Use in Aircraft Radomes: Biomimetic Design Approaches and Its Performances, Fibers Polym. (2024). https://doi.org/10.1007/s12221-024-00776-1
[7] A.I. Ra’eis, M.A.M. Rizal, A.P.M. Saad, A. Syamsir, M.S.R.M. Saufi, Performance and lifespan prediction of pultruded glass fibre reinforced polymer composite cross-arms in transmission towers: A review of machine learning approaches, Structures 90 (2026) 112212. https://doi.org/10.1016/j.istruc.2026.112212
[8] Y. Swolfs, L. Gorbatikh, I. Verpoest, Fibre hybridisation in polymer composites: A review, Compos. Part A Appl. Sci. Manuf. 67 (2014) 181–200. https://doi.org/10.1016/j.compositesa.2014.08.027
[9] P. Kaliappan, R. Kesavan, B. Vijaya Ramnath, Investigation on effect of fibre hybridization and orientation on mechanical behaviour of natural fibre epoxy composite, Bull. Mater. Sci. 40 (2017) 773–782. https://doi.org/10.1007/s12034-017-1420-2
[10] N. Bouhfid, M. Raji, R. Boujmal, H. Essabir, M.-O. Bensalah, R. Bouhfid, A. el kacem Qaiss, Numerical modeling of hybrid composite materials, in: Model. Damage Process. Biocomposites, Fibre-Reinforced Compos. Hybrid Compos., Elsevier, 2019: pp. 57–101. https://doi.org/10.1016/B978-0-08-102289-4.00005-9
[11] A. Karakoti, P. Tripathy, V.R. Kar, K. Jayakrishnan, M. Rajesh, M. Manikandan, Finite element modeling of natural fiber-based hybrid composites, in: Model. Damage Process. Biocomposites, Fibre-Reinforced Compos. Hybrid Compos., Elsevier, 2019: pp. 1–18. https://doi.org/10.1016/B978-0-08-102289-4.00001-1
[12] A. Shahzad, Investigation into fatigue strength of natural/synthetic fiber-based composite materials, in: Mech. Phys. Test. Biocomposites, Fibre-Reinforced Compos. Hybrid Compos., Elsevier, 2019: pp. 215–239. https://doi.org/10.1016/B978-0-08-102292-4.00012-6
[13] M.Y. Salim, M.F.M. Fitri, M.A.M. Rizal, A.B.M. Supian, M.H. Dzulkifli, R.A. Ilyas, S.A. Hassan, Layering Sequences of Fibreglass Meshes: Effects on the Quasi-static Indentation and Flexural Properties of Kenaf/Acrylonitrile Butadiene Styrene Composites, Fibers Polym. 26 (2025) 2057–2068. https://doi.org/10.1007/s12221-025-00941-0
[14] M.F.M. Fauzi, M.R.M. Asyraf, S.A. Hassan, R.A. Ilyas, T. Khan, Hybrid Kenaf Fibre/Fibreglass Meshes Reinforced Thermoplastic ABS Composites based on Quasi-Isotropic Mechanism: A Brief Review, J. Nat. Fibre Polym. Compos. 2 (2023) 1–9
[15] A.N. Aina, M.A.M. Rizal, M.F.A. Rased, R.A. Majid, D.D. Chin Vui Sheng, S.A. Hassan, Experimental investigations on performance and failure mechanisms of glass fiber-reinforced acrylonitrile butadiene styrene composites considering mesh density effect, Polym. Compos. (2025). https://doi.org/10.1002/pc.29744
[16] A.N. Aina, M.A.M. Rizal, M.F.A. Rased, R.A. Majid, D.D.C.V. Sheng, Silane-Coupling Effect on Mechanical and Functional Properties of Glass Fiber-Reinforced Acrylonitrile Butadiene Styrene Composites, Polym. Compos. 47 (2026) S120–S134. https://doi.org/10.1002/pc.70920
[17] M.R.M. Asyraf, M. Rafidah, S. Ebadi, A. Azrina, M.R. Razman, Mechanical properties of sugar palm lignocellulosic fibre reinforced polymer composites: a review, Cellulose 29 (2022) 6493–6516. https://doi.org/10.1007/s10570-022-04695-3
[18] N.I.N. Haris, R.A. Ilyas, M.Z. Hassan, S.M. Sapuan, A. Afdzaluddin, K.R. Jamaludin, S.A. Zaki, F. Ramlie, Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites, Polymers (Basel). 13 (2021) 3343. https://doi.org/10.3390/polym13193343
[19] E.H. Saidane, D. Scida, M.-J. Pac, R. Ayad, Mode-I interlaminar fracture toughness of flax, glass and hybrid flax-glass fibre woven composites: Failure mechanism evaluation using acoustic emission analysis, Polym. Test. 75 (2019) 246–253. https://doi.org/10.1016/j.polymertesting.2019.02.022
[20] A.A. Megahed, F. Abd El-Wadoud, A. Wagih, A.M. Kabeel, Effect of incorporating aluminum wire mesh on the notched and un-notched strengths of glass fiber/epoxy composites, Compos. Struct. 263 (2021) 113695. https://doi.org/10.1016/j.compstruct.2021.113695
[21] P. Krishnasamy, G. Rajamurugan, M. Thirumurugan, Performance of fiber metal laminate composites embedded with AL and CU wire mesh, J. Ind. Text. (2020) 152808372093557. https://doi.org/10.1177/1528083720935570
[22] M. Liu, Q. Zhang, Z. Tan, L. Wang, Z. Li, G. Ma, Investigation of steel wire mesh reinforcement method for 3D concrete printing, Arch. Civ. Mech. Eng. 21 (2021) 24. https://doi.org/10.1007/s43452-021-00183-w
[23] A. Asif Iqbal, A.K.M. Parvez Iqbal, D.M. Nuruzzaman, A review on fatigue fracture characteristics in graphene reinforced nanocomposites, Ain Shams Eng. J. 15 (2024) 102730. https://doi.org/10.1016/j.asej.2024.102730
[24] F.S. da Luz, F.D.C. Garcia Filho, M.T.G. Del-Rio, L.F.C. Nascimento, W.A. Pinheiro, S.N. Monteiro, Graphene-incorporated natural fiber polymer composites: A first overview, Polymers (Basel). 12 (2020) 1601
[25] T. Topkaya, Y.H. Çelik, E. Kilickap, Mechanical properties of fiber/graphene epoxy hybrid composites, J. Mech. Sci. Technol. 34 (2020) 4589–4595. https://doi.org/10.1007/s12206-020-1016-4

