Statistical Evaluation of Alkali-treated Bamboo Fibre Reinforced Polyester Composites using Weibull Analysis

Statistical Evaluation of Alkali-treated Bamboo Fibre Reinforced Polyester Composites using Weibull Analysis

K.J. WONG, K.O. LOW, A.B. CHAI

Abstract. The mechanical performance of natural fibre-reinforced composites is strongly influenced by the quality of interfacial bonding between the fibres and polymer matrices. This study investigates the effects of embedded fibre length and alkali treatment concentration on the interfacial shear strength (IFSS) of bamboo fibre bundles embedded in unsaturated polyester resin. Bamboo bundles were treated with sodium hydroxide (NaOH) at concentrations of 0, 1, 3, 5, and 7 wt%, and embedded at lengths ranging from 1 to 10 mm. Pull-out tests were conducted using a custom-designed jig to minimise premature fibre failure due to clamping stress. Statistical analysis using Weibull distribution revealed that IFSS was largely independent of embedded length beyond 3 mm, with slope values between 1.9–2.7. Alkali treatment significantly enhanced interfacial bonding, with slope values between 4.1–4.9. However, excessive alkali concentration (7 wt%) introduced surface defects, reducing interfacial performance, which can be seen from a drop of slope to 2.3. These findings underscore the importance of alkali treatment to improve the reliability and mechanical integrity of bamboo fibre reinforced polyester composites.

Keywords
Bamboo Fibre, Polyester Resin, Alkali Treatment, Interfacial Shear Strength, Weibull Analysis

Published online 11/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: K.J. WONG, K.O. LOW, A.B. CHAI, Statistical Evaluation of Alkali-treated Bamboo Fibre Reinforced Polyester Composites using Weibull Analysis, Materials Research Proceedings, Vol. 74, pp 133-140, 2026

DOI: https://doi.org/10.21741/9781644904473-17

The article was published as article 17 of the book Composite Science and Technology

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] T.S. Rajendran, M. Johar, K.O. Low, S. Abu Hassan, K.J. Wong, Interlaminar fracture toughness of a plain weave flax/epoxy composite, Plast. Rubber Compos. (2019) 48(2) 74-81. https://doi.org/10.1080/14658011.2018.1550235.
[2] I. Elfaleh, F. Abbassi, M. Habibi, F. Ahmad, M. Guedri, M. Nasri, C. Garnier, A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials, Results Eng. (2023) 19 101271. https://doi.org/10.1016/j.rineng.2023.101271.
[3] M. Mohammadi, M.R. Ishak, M.T.H. Sultan, Exploring chemical and physical advancements in surface modification techniques of natural fiber reinforced composite: A comprehensive review, J. Nat. Fibers (2024) 21(1) 2408633. https://doi.org/10.1080/15440478.2024.2408633.
[4] A. Orue, A. Jauregi, C. Peña-Rodriguez, J. Labidi, A. Eceiza, A. Arbelaiz, The effect of surface modifications on sisal fiber properties and sisal/poly (lactic acid) interface adhesion, Compos. Part B-Eng. (2015) 73(0) 132-138. http://dx.doi.org/10.1016/j.compositesb.2014.12.022.
[5] H. Kim, K. Okubo, T. Fujii, K. Takemura, Influence of fiber extraction and surface modification on mechanical properties of green composites with bamboo fiber, J. Adhes. Sci. Technol. (2012) 27(12) 1348-1358. https://doi.org/10.1080/01694243.2012.697363.
[6] M.A. Sawpan, K.L. Pickering, A. Fernyhough, Effect of fibre treatments on interfacial shear strength of hemp fibre reinforced polylactide and unsaturated polyester composites, Compos. Part A-Appl. S. (2011) 42(9) 1189-1196. http://dx.doi.org/10.1016/j.compositesa.2011.05.003.
[7] K.L. Pickering, M.A. Sawpan, J. Jayaraman, A. Fernyhough, Influence of loading rate, alkali fibre treatment and crystallinity on fracture toughness of random short hemp fibre reinforced polylactide bio-composites, Compos. Part A-Appl. S. (2011) 42(9) 1148-1156. http://dx.doi.org/10.1016/j.compositesa.2011.04.020.
[8] K.J. Wong, B.F. Yousif, K.O. Low, The effects of alkali treatment on the interfacial adhesion of bamboo fibres, P I Mech Eng L-J Mat (2010) 224(3) 139-148. https://doi.org/10.1243/14644207JMDA304.
[9] M.S. Islam, K.L. Pickering, N.J. Foreman, Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites, Compos. Part A-Appl. S. (2010) 41(5) 596-603. http://dx.doi.org/10.1016/j.compositesa.2010.01.006.
[10] R. Tokoro, D. Vu, K. Okubo, T. Tanaka, T. Fujii, T. Fujiura, How to improve mechanical properties of polylactic acid with bamboo fibers, J. Mater. Sci. (2008) 43(2) 775-787. https://doi.org/10.1007/s10853-007-1994-y.
[11] J.-M. Park, P.-G. Kim, J.-H. Jang, Z. Wang, B.-S. Hwang, K.L. DeVries, Interfacial evaluation and durability of modified Jute fibers/polypropylene (PP) composites using micromechanical test and acoustic emission, Compos. Part B-Eng. (2008) 39(6) 1042-1061. http://dx.doi.org/10.1016/j.compositesb.2007.11.004.
[12] C. Baley, F. Busnel, Y. Grohens, O. Sire, Influence of chemical treatments on surface properties and adhesion of flax fibre–polyester resin, Compos. Part A-Appl. S. (2006) 37(10) 1626-1637. http://dx.doi.org/10.1016/j.compositesa.2005.10.014.
[13] P.J. Herrera-Franco, A. Valadez-González, A study of the mechanical properties of short natural-fiber reinforced composites, Compos. Part B-Eng. (2005) 36(8) 597-608. http://dx.doi.org/10.1016/j.compositesb.2005.04.001.
[14] A.N. Towo, M.P. Ansell, M.-L. Pastor, D.E. Packham, Weibull analysis of microbond shear strength at sisal fibre–polyester resin interfaces, Compos. Interface. (2005) 12(1-2) 77-93. https://doi.org/10.1163/1568554053542142.
[15] A. Arbelaiz, G. Cantero, B. Fernández, I. Mondragon, P. Gañán, J.M. Kenny, Flax fiber surface modifications: Effects on fiber physico mechanical and flax/polypropylene interface properties, Polym. Compos. (2005) 26(3) 324-332. https://doi.org/10.1002/pc.20097.
[16] A. Valadez-Gonzalez, J.M. Cervantes-Uc, R. Olayo, P.J. Herrera-Franco, Effect of fiber surface treatment on the fiber–matrix bond strength of natural fiber reinforced composites, Compos. Part B-Eng. (1999) 30(3) 309-320. http://dx.doi.org/10.1016/S1359-8368(98)00054-7.
[17] J.-M. Park, S.T. Quang, B.-S. Hwang, K.L. DeVries, Interfacial evaluation of modified jute and hemp fibers/polypropylene (PP)-maleic anhydride polypropylene copolymers (PP-MAPP) composites using micromechanical technique and nondestructive acoustic emission, Compos. Sci. Technol. (2006) 66(15) 2686-2699. http://doi.org/10.1016/j.compscitech.2006.03.014.
[18] S.S. Tripathy, G. Levita, L. Di Landro, Interfacial adhesion in jute-polyolefin composites, Polym. Compos. (2001) 22(6) 815-822. https://doi.org/10.1002/pc.10583.
[19] P.J. Herrera-Franco, A. Valadez-González, Mechanical properties of continuous natural fibre-reinforced polymer composites, Compos. Part A-Appl. S. (2004) 35(3) 339-345. http://dx.doi.org/10.1016/j.compositesa.2003.09.012.
[20] R.-B. Adusumalli, M. Reifferscheid, H.K. Weber, T. Roeder, H. Sixta, W. Gindl, Shear strength of the lyocell fiber/polymer matrix interface evaluated with the microbond technique, J. Compos. Mater. (2012) 46(3) 359-367. https://doi.org/10.1177/0021998310382312.
[21] S. Luo, A.N. Netravali, Interfacial and mechanical properties of environment-friendly “green” composites made from pineapple fibers and poly(hydroxybutyrate-co-valerate) resin, J. Mater. Sci. (1999) 34(15) 3709-3719. https://doi.org/10.1023/a:1004659507231.
[22] A. Stamboulis, C. Baillie, E. Schulz, Interfacial characterisation of flax fibre-thermoplastic polymer composites by the pull-out test, Angew. Makromol. Chem. (1999) 272(1) 117-120. https://doi.org/10.1002/(sici)1522-9505(19991201)272:1<117::aid-apmc117>3.0.co;2-9.
[23] S. Wong, R.A. Shanks, A. Hodzic, Effect of additives on the interfacial strength of poly(l-lactic acid) and poly(3-hydroxy butyric acid)-flax fibre composites, Compos. Sci. Technol. (2007) 67(11–12) 2478-2484. http://dx.doi.org/10.1016/j.compscitech.2006.12.016.
[24] N. Graupner, J. Rößler, G. Ziegmann, J. Müssig, Fibre/matrix adhesion of cellulose fibres in PLA, PP and MAPP: A critical review of pull-out test, microbond test and single fibre fragmentation test results, Compos. Part A-Appl. S. (2014) 63(0) 133-148. http://dx.doi.org/10.1016/j.compositesa.2014.04.011.
[25] A. Le Duigou, P. Davies, C. Baley, Interfacial bonding of Flax fibre/Poly(l-lactide) bio-composites, Compos. Sci. Technol. (2010) 70(2) 231-239. http://dx.doi.org/10.1016/j.compscitech.2009.10.009.
[26] A. Kelly, W.R. Tyson, Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum, J. Mech. Phys. Solids (1965) 13(6) 329-350. http://dx.doi.org/10.1016/0022-5096(65)90035-9.