Evaluating the Role of Biomass Allocation in Mango (Mangifera indica L.) as Predictors of Natural Fiber Yield for Sustainable Composites

Evaluating the Role of Biomass Allocation in Mango (Mangifera indica L.) as Predictors of Natural Fiber Yield for Sustainable Composites

Fadhilnor ABDULLAH, Nurul Afidah UMORUDDIN, Mohd Khairul Rabani HASHIM, Zainal Abidin ARSAT, Muhammad Nur Aiman UDA, Muhammad Firdaus ABDUL MUTTALIB

Abstract. The growing interest in renewable resources for sustainable materials has underscored the significance of agricultural biomass as a natural fibre source for bio-composite applications. Mango (Mangifera indica L.) trees produce considerable amounts of vegetative biomass and bio-wastes during orchard management. This study assessed an early-stage source of lignocellulosic bio-waste from mango plants at the seedling stage. In nursery, unwanted mango seedlings planted under different shading net usually discarded and underutilised by the growers. Therefore, this study evaluated the impact of different shading treatments on biomass distribution in mango plants and investigated their implications for fibre yield and utility in composite production. The mango plants were placed under different shading regimes (0%, 50%, and 80%), and the fresh and dry weights of stems, leaves, and roots were measured, along with growth allocation characteristics such as moisture content, root-to-shoot ratio, root length, and leaf weight ratio. The findings indicated that seedlings exposed to full sunlight (0% shading) had the greatest total fresh weight and total dry weight, with notable contributions from stem and root dry matter. In contrast, heavy shading (80%) significantly decreased stem dry weight and root dry weight, while increasing moisture content and lowering the root-to-shoot ratio. Moderate shading (50%) preserved total fresh biomass similar to that under full sunlight, but exhibited reduced structural dry weight, suggesting limited advantages for fibre applications. These results highlight the important role of light availability in determining biomass quantity, quality, and distribution, which directly affects the mechanical potential of extracted fibres. Stems and roots of mango plants planted in full sunlight yield the highest levels of lignocellulosic material, making them preferable for use in natural fibre composites. Conversely, mango plants grown in shaded conditions accumulate less usable dry matter and show higher water content, which increases processing challenges and diminishes fibre performance. This research illustrates that managing environmental factors, especially light availability, is essential for optimising mango biomass for sustainable composite manufacturing. Merging biomass enhancement with materials development provides a strategy for valuing mango residues within a circular bioeconomy, decreasing agricultural waste while promoting green material innovation.

Keywords
Biomass Allocation, Biowastes, Mango, Natural Fibres, Sustainable Materials

Published online 11/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Fadhilnor ABDULLAH, Nurul Afidah UMORUDDIN, Mohd Khairul Rabani HASHIM, Zainal Abidin ARSAT, Muhammad Nur Aiman UDA, Muhammad Firdaus ABDUL MUTTALIB, Evaluating the Role of Biomass Allocation in Mango (Mangifera indica L.) as Predictors of Natural Fiber Yield for Sustainable Composites, Materials Research Proceedings, Vol. 74, pp 109-116, 2026

DOI: https://doi.org/10.21741/9781644904473-14

The article was published as article 14 of the book Composite Science and Technology

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] S. Babu, S. S. Rathore, R. Singh, S. Kumar, V. K. Singh, S. Yadav, V. Yadav, R. Raj, D. Yadav, K. Shekhawat, Exploring agricultural waste biomass for energy, food and feed production and pollution mitigation: A review, Biores Tech 360 (2022) 127566. https://doi.org/10.1016/j.biortech.2022.127566
[2] De, S. James, B. Ji, J. Wasti, S. Zhang, S. Kore, S. Tekinalp, H. Li, Y. Ureña-Benavides, E. E. Vaidya, U. Biomass-derived composites for various applications, Advan Bioen 8 (2023) 145-196. https://doi.org/10.1016/bs.aibe.2023.01.001
[3] R. Roslim, A. A. Nordin, M. H. C. Mat, A. Zakaria, M. Jaafar, N. Evaluation of pruning waste of Mangifera indica var Harumanis cultivated in greenhouse. MATEC Web of Conferences, 150 (2018) 06022. https://doi.org/10.1051/matecconf/201815006022
[4] M. Patra, D. Sahu, Perspective Chapter: Environmental-Friendly Agro-Waste Management. In Solid Waste and Landfills Management-Recent Advances. Zailani, S., Sarvajayakesavalu, S. eds, IntechOpen (2022) 200. https://doi.org/10.5772/intechopen.107505
[5] L. Susmita Devi, A. Mukherjee, S. Kumar, Promising Agro‐Wastes for Food Packaging. In Agro‐Waste Derived Biopolymers and Biocomposites: Innovations and Sustainability in Food Packaging, Avik, M., Vimal, K., eds.; John Wiley & Sons, Inc. Beverly (2024) pp.1-31. https://doi.org/10.1002/9781394175161.ch1
[6] S. Afolalu, E. Salawu, T. Ogedengbe, O. Joseph, O. Okwilagwe, M. Emetere, O. Yusuf, A. Noiki, S. Akinlabi, Bio-agro waste valorization and its sustainability in the industry: A review. IOP Conf Series, Mat Sci Engi (2021) 012140.
https://doi.org/10.1088/1757-899X/1107/1/012140
[7] M. A. Ismail, Dubdub, I. Mousa, S. Albin, Z. A. A. Zaid, M. A. Alfaiad, Characterization, combustion behaviour, and kinetic and thermodynamic modelling of mango peel as a potential biomass feedstock, Polymers 17 (2025) 1799. https://doi.org/10.3390/polym17131799
[8] K. O. Iwuozor, V. E. Ojukwu, S. O. Eshiemogie, E. C. Emenike, A. O. Bajeh, J. O. Ighalo, A. G. Adeniyi, Plant biomass materials in composite application. In Plant Biomass Applications; Jawaid, M., Mohammed A.A., Khan A., eds.; Elsevier: Amsterdam, Netherlands, 2024 pp. 385-405. https://doi.org/10.1016/B978-0-443-15465-2.00010-0
[9] C. Santulli, Utilization of Renewable Biomass and Waste Materials for Production of Environmentally-Friendly, Bio-based Composites. In Eco-Friendly Adhesives for Wood and Natural Fiber Composites: Characterization, Fabrication and Applications; Jawaid, M., Khan, T.A., Nasir, M., Asim, M. eds., Springer. Cham.: Springer Nature Switzerland, 2021 pp. 131-145. https://doi.org/10.1007/978-981-33-4749-6_7
[10] P. Deborah, V. Francesca, G. Giuseppe, Analysis of the environmental impact of a biomass plant for the production of bioenergy, Renew Sust Ener Rev 51 (2015) 634-647. https://doi.org/10.1016/j.rser.2015.06.048
[11] M. Kleyer, J. Trinogga, M. A. Cebrián‐Piqueras, A. Trenkamp, C. Fløjgaard, R. Ejrnæs, T. J. Bouma, V. Minden, M. Maier, J. Mantilla‐Contreras, Trait correlation network analysis identifies biomass allocation traits and stem specific length as hub traits in herbaceous perennial plants, J Ecol 107 (2019) 829-842. https://doi.org/10.1111/1365-2745.13066
[12] Q. Yin, T. Tian, X. Han, J. Xu, Y. Chai, J. Mo, M. Lei, L. Wang, M. Yue, The relationships between biomass allocation and plant functional trait, Ecol Indic 102 (2019) 302-308. https://doi.org/10.1016/j.ecolind.2019.02.047
[13] P. Balan, G. Priyadharshini, D. Divakaran, I. Suyambulingam, N. Sunesh, S. Rangappa, S. Siengchin, Microcrystalline cellulose extraction from comprehensive characterization of Mangifera indica leaf biowaste for high-performance bio-based polymer composites. J Poly Res 32 (2025), 23. https://doi.org/10.1007/s10965-024-04251-6
[14] L. M. Ana, S. Rogelio, S. Xose Carlos, M. Rosa Ana, Cell wall composition impacts structural characteristics of the stems and thereby the biomass yield, J Agric Fd Chem 70 (2022) 3136-3141. https://doi.org/10.1021/acs.jafc.1c06986
[15] V. Jeyabalaji, G. Kannan, P. Ganeshan, K. Raja, B. Nagaraja Ganesh, P. Raju, Extraction and characterization studies of cellulose derived from the roots of Acalypha indica L., J Nat 19 (2022) 4544-4556. https://doi.org/10.1080/15440478.2020.1867942
[16] A. J. Kings, I. Suyambulingam, S. Narayanaperumal, L. Miriam, M. Divakaran, D. Murali, A. S. S. Han, Exploring biomass derived microcrystalline cellulose from the waste aquatic plant Pistia stratiotes: A comprehensive characterization for polymer composite reinforcement, Inter J Biol Macromol, 300 (2025) 140217. https://doi.org/10.1016/j.ijbiomac.2025.140217
[17] D. Kouidri, M. Rokbi, Z. E. Rahmouni, Y. Kherbiche, S. Bouchareb, S. M. Rangappa, S. Siengchin, Investigation of mechanical and physico-chemical properties of new natural fiber extracted from Bassia indica plant for reinforcement of lightweight bio-composites, Heliyon 10 (2024) e35552. https://doi.org/10.1016/j.heliyon.2024.e35552
[18] F. G. Fonseca, A. Funke, A. Niebel, A. P. S. Dias, N. Dahmen, Moisture content as a design and operational parameter for fast pyrolysis, J Anal App Pyrol 139 (2019) 73-86.
https://doi.org/10.1016/j.jaap.2019.01.012
[19] W. A. Smith, L. M. Wendt, I. J. Bonner, J. A. Murphy, Effects of storage moisture content on corn stover biomass stability, composition, and conversion efficacy, Fron Bioeng Biotech 8 (2020) 716. https://doi.org/10.3389/fbioe.2020.00716
[20] S. Hussain, N. Iqbal, T. Rahman, T. Liu, M. Brestic, M. E. Safdar, M. A. Asghar, M. U. Farooq, I. Shafiq, A. Ali, Shade effect on carbohydrates dynamics and stem strength of soybean genotypes, Envin Exp Bot 162 (2019) 374-382. https://doi.org/10.1016/j.envexpbot.2019.03.011
[21] G. Resente, A. Crivellaro, Environmental impacts on plant cell wall lignification, J Biores Bioprod 10 (2025) 4-6. https://doi.org/10.1016/j.jobab.2024.11.001
[22] L. Wu, W. Zhang, Y. Ding, J. Zhang, E. D. Cambula, F. Weng, Z. Liu, C. Ding, S. Tang L. Chen, Shading contributes to the reduction of stem mechanical strength by decreasing cell wall synthesis in japonica rice (Oryza sativa L.), Front Pla Sc 8 (2017) 881.
https://doi.org/10.3389/fpls.2017.00881
[23] P. Pal, A. K. Singh, R. K. Srivastava, S. S. Rathore, U. K. Sahoo, S. Subudhi, P. K. Sarangi, P. Prus, Circular bioeconomy in action: Transforming food wastes into renewable food resources, Foods 13 (2024) 3007. https://doi.org/10.3390/foods13183007