AI Driven in Composite Material Science

AI Driven in Composite Material Science

Anis Farina MANSOR, Iylia IDRIS, Dinie MUHAMMAD, Rushdan Ahmad ILYAS, Fakhrony Sholahudin ROHMAN, Ashraf AZMI

Abstract. Artificial intelligence (AI) integrated into composite material science is revolutionizing material design, optimization, and monitoring. Especially Machine Learning (ML) and Deep Learning (DL), artificial intelligence methods improve manufacturing efficiency, fault identification, and material selection. Important artificial intelligence uses like structural health monitoring (SHM), generative design, and predictive modelling are reviewed in this paper. Examining high-impact studies helps the present work to show how artificial intelligence is expediting material discovery, enhancing accuracy, and allowing real-time condition monitoring. Still unresolved, though, are issues like data availability, computing limits, and experimental validation. For next-generation smart materials, future directions stress artificial intelligence integration with quantum computing and Internet of Things (IoT). This paper shows how artificial intelligence is transforming composite materials, therefore offering insightful analysis for academics and business leaders.

Keywords
Artificial Intelligence, Machine Learning, Deep Learning, Composite Material

Published online 11/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Anis Farina MANSOR, Iylia IDRIS, Dinie MUHAMMAD, Rushdan Ahmad ILYAS, Fakhrony Sholahudin ROHMAN, Ashraf AZMI, AI Driven in Composite Material Science, Materials Research Proceedings, Vol. 74, pp 76-83, 2026

DOI: https://doi.org/10.21741/9781644904473-10

The article was published as article 10 of the book Composite Science and Technology

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] F. Rohman, S. Wan Alwi, D. Muhammad, A. Azmi, M. Murat, Nonlinear model predictive controller of hydrogenation of dimethyl oxalate for ethylene glycol production, Chemical Product and Process Modeling 19 (2024) 761-774. https://doi.org/10.1515/cppm-2024-0025
[2] M. Karuppusamy, R. Thirumalaisamy, S. Palanisamy, S. Nagamalai, E. El Sayed Massoud, N. Ayrilmis, A review of machine learning applications in polymer composites: Advancements, challenges, and future prospects, Journal of Materials Chemistry A 13 (2025) 16290–16308. https://doi.org/10.1039/D5TA00982K
[3] A.B. Abdulhussein, I.F. Senturk, Machine Learning and Artificial Intelligence in Composite Materials: A Comprehensive Review, SSRN (2025) http://dx.doi.org/10.2139/ssrn.5343332
[4] F. Kibrete, T. Trzepieciński, H.S. Gebremedhen, D.E. Woldemichael, Artificial Intelligence in Predicting Mechanical Properties of Composite Materials, Journal of Composites Science 7 (2023) 364. https://doi.org/10.3390/jcs7090364
[5] S. Yoshimori, J. Koyanagi, R. Matsuzaki, Efficient Prediction of Fatigue Damage Analysis of Carbon Fiber Composites Using Multi-Timescale Analysis and Machine Learning, Polymers 16 (2024) 3448. https://doi.org/10.3390/polym16233448
[6] B. Dev, M.A. Rahman, M.J. Islam, M.Z. Rahman, D. Zhu, Properties prediction of composites based on machine learning models: A focus on statistical index approaches, Materials Today Communications 38 (2024) 107659. https://doi.org/10.1016/j.mtcomm.2023.107659
[7] W. Hou, M. Li, Y. Yang, Z. Liu, L. Sang, Layup optimization of composite B-pillar under side impact, International Journal of Mechanical Sciences 287 (2025) 109927. https://doi.org/10.1016/j.ijmecsci.2025.109927
[8] B.B. Yin, K.M. Liew, Machine learning and materials informatics approaches for evaluating the interfacial properties of fiber-reinforced composites, Composite Structures 273 (2021) 114328. https://doi.org/10.1016/j.compstruct.2021.114328
[9] N. Shirolkar, P. Patwardhan, A. Rahman, A. Spear, S. Kumar, Investigating the efficacy of machine learning tools in modelling the continuous stabilization and carbonization process and predicting carbon fiber properties, Carbon 174 (2021) 605-616. https://doi.org/ 10.1016/j.carbon.2020.12.044
[10] W. Villegas-Ch, J. García-Ortiz, S. Sánchez-Viteri, Toward intelligent monitoring in IoT: AI applications for real-time analysis and prediction, IEEE access 12 (2024) 40368-40386.
[11] M. Seckin, P. Demircioglu, A.C. Seckin, I. Bogrekci, S. Aksoy, Artificial Intelligence for Non-Destructive Imaging in Composite Materials, Eng. 6 (2025) 46. https://doi.org/10.3390/eng6030046
[12] S.J. Huang, Y. Adityawardhana, J. Sanjaya, Predicting Mechanical Properties of Magnesium Matrix Composites with Regression Models by Machine Learning, Journal of Composites Science 7 (2023) 347. https://doi.org/10.3390/jcs709034
[13] L. Song, D. Wang, X. Liu, A. Yin, Z. Long, Prediction of mechanical properties of composite materials using multimodal fusion learning, Sensors and Actuators A: Physical 358 (2023) 114433. https://doi.org/10.1016/J.SNA.2023.114433
[14] C.E. Okafor, S. Iweriolor, O.I. Ani, S. Ahmad, S. Mehfuz, G.O. Ekwueme, O.E. Chukwumuanya, S.E. Abonyi, I.E. Ekengwu, O.P. Chikelu, Advances in machine learning-aided design of reinforced polymer composite and hybrid material systems, Hybrid Advances 2 (2023) 100026. https://doi.org/10.1016/j.hybadv.2023.100026
[15] I. Papadimitriou, I. Gialampoukidis, S. Vrochidis, I. Kompatsiaris, AI methods in materials design, discovery and manufacturing: A review, Computational Materials Science 235 (2024) 112793. https://doi.org/10.1016/j.commatsci.2024.112793
[16] S. Lee, Z. Zhang, G.X. Gu, Generative machine learning algorithm for lattice structures with superior mechanical properties, Mater Horiz. 9 (2022) 952-960. https://doi.org/10.1039/D1MH01792F
[17] I. Qavi, S. Halder, G. Tan, Optimization of printability of bioinks with multi-response optimization (MRO) and artificial neural networks (ANN), Progress in Additive Manufacturing 10 (2025) 3573-3598. https://doi.org/10.1007/s40964-024-00828-1
[18] K. Aghabalaei Baghaei, S.A. Hadigheh, Artificial neural network prediction of transverse modulus in humid conditions for randomly distributed unidirectional fibre reinforced composites: A micromechanics approach, Composite Structures 337 (2024) 118073. https://doi.org/10.1016/J.COMPSTRUCT.2024.118073