Economical and Global Warming Potential Evaluation of Thermoplastic Pultruded Materials
Léo SUDRIÈS, Joël SERRA, Wiyao AZOTI, Bruno CASTANIÉ
Abstract. With the aim of decarbonize railway transport, a solution of lightweight railways tracks with composites materials is investigated. Using thermoplastics PA6 (from caprolactam), Elium® (acrylic-based) resin and thermoset epoxy resin with carbon, glass, basalt and flax fibers, seven fibre/matrix combinations have been studied. In order to objectively compare a new composite solution, an estimation of the economic cost as well as the carbon cost using a cradle-to-gate approach on raw materials with the Global Warming Potential (GWP) criterion was carried out and compared to the traditional steel solution. A ratio between ecological impact and mechanical performance has been established in order to determine the best composite combination for eco-design. Configurations involving basalt fibres offer the best ecological cost/performance ratio. Configurations with carbon fibres achieves the best mechanical properties but are not competitive in terms of carbon cost/performance ratio. Therefore, basalt fibres open up new possibilities for designing and sizing the next generation of composite railways.
Keywords
Railways Tracks, Pultruded Composite, Eco-Design, Cost/Performance Ratio
Published online 11/8/2026, 4 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Léo SUDRIÈS, Joël SERRA, Wiyao AZOTI, Bruno CASTANIÉ, Economical and Global Warming Potential Evaluation of Thermoplastic Pultruded Materials, Materials Research Proceedings, Vol. 73, pp 311-314, 2026
DOI: https://doi.org/10.21741/9781644904459-61
The article was published as article 61 of the book Mechanics of Advanced Materials and Structures
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Statistical Data and Studies Department (SDSD). Key Transportation Statistics – 2023 Edition [Internet]. 2023. Available from: https://www.statistiques.developpement-durable.gouv.fr/chiffres-cles-des-transports-edition-2023
[2] F. Neveu, B. Castanié, and P. Olivier, “The GAP methodology: A new way to design composite structures,” Materials & Design, vol. 172, p. 107755, Jun. 2019. https://doi.org/10.1016/j.matdes.2019.107755.
[3] K. Minchenkov, A. Vedernikov, A. Safonov, and I. Akhatov, “Thermoplastic Pultrusion: A Review,” Polymers, vol. 13, no. 2, p. 180, Jan. 2021. https://doi.org/10.3390/polym13020180.
[4] F. Tucci and A. Vedernikov, “Design Criteria for Pultruded Structural Elements,” in Reference Module in Materials Science and Materials Engineering, vol. 3, 2021, pp. 51–68. doi: 10.1016/B978-0-12-819724-0.00086-0.
[5] Sudriès L, Diboune I, Cloos A, De Almeida O, Serra J, Azoti W et al., “Selection of pultruded composite materials for new, low-carbon emission, lightweight railways tracks, with a focus on mechanics, economics and sustainability,” Materials & Design, vol. 261, p. 115401, Dec. 2025. https://doi.org/10.1016/j.matdes.2025.115401.
[6] C. Vicard, O. De Almeida, A. Cantarel, and G. Bernhart, “Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam,” Polymer, vol. 132, pp. 88–97, Dec. 2017. https://doi.org/10.1016/j.polymer.2017.10.039.
[7] G. Finnveden and J. Potting, “Life Cycle Assessment,” in Encyclopedia of Toxicology (Third Edition), P. Wexler, Ed., Oxford: Academic Press, 2014, pp. 74–77. doi: 10.1016/B978-0-12-386454-3.00627-8.

