Numerical Analysis of Composite Shells with Curved Fibers via Curvilinear 2|3D Finite Elements
Piero CHIAIA, Maria CINEFRA
Abstract. In this work, a finite element model for the analysis of curved panel with variable thickness and arbitrary curvature made of composite materials is proposed. Higher-order shell models are derived in a general non-orthogonal coordinate system, recovering the Cartesian description of the physical quantities via a consistent transformation law. The Carrera Unified Formulation (CUF) framework is adopted in the derivation of 2|3D shell models, embedding a Lagrange-type theory of structures within the finite element interpolation of the reference mid-surface, enhancing the three-dimensional geometrical modeling capabilities of the present approach. This strategy is here extended for the first time to the analysis of composite, laminated structures by modeling curved path fibers by means of the local covariant reference frame by which the element is defined, validating the model against 3D solutions obtained via commercial software.
Keywords
Curved Shells, Curvilinear Models, Finite Element Models, Composites
Published online 11/8/2026, 4 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Piero CHIAIA, Maria CINEFRA, Numerical Analysis of Composite Shells with Curved Fibers via Curvilinear 2|3D Finite Elements, Materials Research Proceedings, Vol. 73, pp 245-248, 2026
DOI: https://doi.org/10.21741/9781644904459-47
The article was published as article 47 of the book Mechanics of Advanced Materials and Structures
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Kim B.C. and Potter P. and Weaver P.M. “Continuous tow shearing for manufacturing variable angle tow composites”. Composites Part A: Applied Science and Manufacturing, Vol. 43, pp. 1347-1356, 2012. https://doi.org/10.1016/j.compositesa.2012.02.024.
[2] Reddy J. N. “A Simple Higher-Order Theory for Laminated Composite Plates”. Journal of Applied Mechanics, Vol. 51, n.4. pp. 1347-1356, 2012. https://doi.org/10.1016/j.compositesa.2012.02.024.
[3] Reddy J. N and Liu C.F. “A higher-order shear deformation theory of laminated elastic shells”. International Journal of Engineering Science, Vol 23, n.3, pp. 319-330, 1985. https://doi.org/10.1016/0020-7225(85)90051-5.
[4] Chiaia P., Cinefra M. and Carrera E.. “Curvilinear 2|3D finite elements for the analysis of shells with arbitrary curvature and variable thickness”. Computers & Structures, Vol 317, 107911, 2025. https://doi.org/10.1016/j.compstruc.2025.107911.
[5] Li G., Carrera E., Cinefra M., de Miguel A.G., Pagani A. and Zappino E. “An adaptable refinement approach for shell finite element models based on node-dependent kinematics”. Composite Structures, Vol. 210, pp. 1-19, 2019. https://doi.org/10.1016/j.compstruct.2018.10.111.



