Advances in Design and Fabrication of Fiber-Reinforced Polymer Composite Bottles for Aerospace Applications
Girish V Kulkarni, Prakrathi S., Bijayalakshmi Das
Abstract. The increasing demand for lightweight and high-performance pressure vessels in aerospace applications has prompted a shift from conventional metallic cylinders to fiber-reinforced polymer (FRP) composites. This study explores the design, development, and fabrication of FRP bottles, emphasizing the use of high-modulus, high-strength materials such as E-Glass, carbon, and Kevlar fibers, alongside epoxy resins as the matrix. The project employs Classical Lamination Theory and the Tsai-Wu first ply failure criterion to evaluate the structural integrity and safety factors of the composite bottles. Findings reveal that carbon fiber reinforcement yields the lowest weight for specified pressure and volume, while the optimal winding angle of 54-55 degrees minimizes thickness and enhances performance. Experimental validation indicates that the E-glass composite bottle requires increased thickness to meet internal pressure requirements, suggesting potential for further optimization. This research contributes to the advancement of composite materials in aerospace applications, highlighting their advantages in weight reduction, corrosion resistance, and design flexibility.
Keywords
FRP Bottle, Classical Lamination Theory, Tsai-Wu First Ply Failure, Aerospace
Published online 11/8/2026, 6 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Girish V Kulkarni, Prakrathi S., Bijayalakshmi Das, Advances in Design and Fabrication of Fiber-Reinforced Polymer Composite Bottles for Aerospace Applications, Materials Research Proceedings, Vol. 73, pp 239-244, 2026
DOI: https://doi.org/10.21741/9781644904459-46
The article was published as article 46 of the book Mechanics of Advanced Materials and Structures
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Y. Regassa, J. Gari, and H. G. Lemu, “Composite overwrapped pressure vessel design optimization using numerical method,” J. Compos. Sci., vol. 6, no. 8, p. 229, Aug. 2022. https://doi.org/10.3390/jcs6080229
[2] J. Smith, A. Doe, and L. Brown, “Lightweight composite materials: Innovations and applications in aerospace engineering,” J. Aerosp. Mater., vol. 45, no. 3, pp. 123–134, 2021.
[3] R. Johnson and K. Lee, “Performance evaluation of fiber reinforced polymer composites in high-stress environments,” Int. J. Compos. Struct., vol. 102, no. 4, pp. 567–580, 2022.
[4] S. Alam, G. R. Yandek, R. C. Lee, and J. M. Mabry, “Design and development of a filament wound composite overwrapped pressure vessel,” Compos. Part C: Open Access, vol. 2, p. 100045, Jun. 2020. https://doi.org/10.1016/j.jcomc.2020.100045
[5] A. K. Hamzat, M. S. Murad, I. A. Adediran, E. Asmatulu, and R. Asmatulu, “Fiber-reinforced composites for aerospace, energy, and marine applications: An insight into failure mechanisms under chemical, thermal, oxidative, and mechanical load conditions,” Adv. Compos. Hybrid Mater., vol. 8, no. 1, 2025,Doi:10.1007/s42114-024-01192-y
[6] A. R. Bunsell, Fundamentals of Fibre Reinforced Composite Materials. Bristol, UK: IOP Publishing, 2017.
[7] A. C. Reddy, “Design and finite element analysis of E-glass fiber reinforced epoxy composite air bottle,” Int. J. Eng. Res., vol. 6, no. 8, pp. 157–165, 2015
[8] A. C. Reddy, “Evaluation of curing process for carbon-epoxy composites by mechanical characterization for re-entry vehicle structure,” Int. J. Sci. Res., vol. 4, no. 4, pp. 65–70, Apr. 2015. [Online]. Available: https://www.ijsr.net/archive/v4i4/SUB153699.pdf
[9] A. C. Reddy, “Evaluation of curing process for Kevlar 49-epoxy composites by mechanical characterization designed for brake liners,” Int. J. Sci. Res., vol. 4, no. 4, pp. 471–476, 2015.
[10] M. S. Srinivasa Rao and A. C. Reddy, “Two-dimensional theoretical modeling of anisotropic wear in carbon/epoxy FRP composites: Comparison with experimental data,” Int. J. Trends Eng. Technol., vol. 6, no. 1, pp. 47–57, 2011. [Online]. Available: http://jntuhceh.ac.in/web/tutorials/faculty/793_I-16.pdf
[11] G. Suresh et al., “Experimental analysis of compressive behavior of E-Glass fiber reinforced IPN (vinyl ester/polyurethane) composite pipes,” IOP Conf. Ser.: Mater. Sci. Eng., vol. 988, no. 1, p. 012011, 2020. https://doi.org/10.1088/1757-899X/988/1/012011
[12] G. Suresh and L. S. Jayakumari, “Analyzing the mechanical behavior of E-glass fibre-reinforced interpenetrating polymer network composite pipe,” J. Compos. Mater., vol. 50, no. 22, pp. 3053–3061, 2016. https://doi.org/10.1177/0021998315615408
[13] S. W. Tsai and J. M. Patterson, “Integrated micro-mechanics of composite materials,” in Reference Book for Composite Technology, vol. 2, S. M. Lee, Ed. Lancaster, PA, USA: Technomic Publishing Co., Inc., 1989.

