Mode Change and Evolution of Thin Deployable Space Structures in Small and Large Displacement Regimes

Mode Change and Evolution of Thin Deployable Space Structures in Small and Large Displacement Regimes

Erasmo CARRERA, Riccardo AUGELLO, Andrea SERINO

Abstract. Predicting the dynamic response of thin-walled deployable space structures, such as tape springs, remains a major challenge due to severe geometric nonlinearities. Classical 1D beam models miss essential cross-sectional morphing. Consequently, analyzing these architectures typically requires the use of computationally expensive 3D solid elements. To overcome this limitation, this study employs the 1D Carrera Unified Formulation (CUF) to investigate the modal evolution of a tape spring subjected to large axial tensile loads. By solving the generalized eigenvalue problem around distinct equilibrium states, the pre-stress field is explicitly incorporated via the geometric stiffness matrix (K_σ). Comparing linear and non-linear analyses reveals that a linear assumption yields an unmitigated stress-stiffening effect, causing unrealistic frequency spikes and chaotic modal shifts. The non-linear analysis, however, successfully captures cross-section deformation, which significantly mitigates artificial stiffening and stabilizes modal evolution. These findings highlight that combining high-fidelity non-linear equilibrium analysis with advanced modal tracking (MAC) is essential to correctly interpret these complex structural dynamics.

Keywords
Deployable Space Structures, Geometric Non-Linearities, Modes Change, Carrera Unified Formulation (CUF)

Published online 11/8/2026, 6 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Erasmo CARRERA, Riccardo AUGELLO, Andrea SERINO, Mode Change and Evolution of Thin Deployable Space Structures in Small and Large Displacement Regimes, Materials Research Proceedings, Vol. 73, pp 200-205, 2026

DOI: https://doi.org/10.21741/9781644904459-39

The article was published as article 39 of the book Mechanics of Advanced Materials and Structures

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] S. Pellegrino, “Deployable structures in engineering,” in Deployable structures, Springer, 2001, pp. 1-35. https://doi.org/10.1007/978-3-7091-2584-7_1
[2] R. Augello and S. Pellegrino, “Vibration Damping of Thin-Shell Deployable Structures Through Local Buckling,” in AIAA SCITECH 2025 Forum, 2025. https://doi.org/10.2514/6.2025-0693
[3] A. Pagani and E. Carrera, “Unified formulation of geometrically nonlinear refined beam theories,” vol. 25, no. 1, pp. 15-31, 2018. https://doi.org/10.1080/15376494.2016.1232458
[4] A. Pagani, R. Augello and E. Carrera, “Frequency and mode change in the large deflection and post-buckling of compact and thin-walled beams,” vol. 432, pp. 88-104, 2018. https://doi.org/10.1016/j.jsv.2018.06.024
[5] E. Carrera, G. Giunta and M. Petrolo, Beam structures: classical and advanced theories, John Wiley & Sons, 2011. https://doi.org/10.1002/9781119978565
[6] E. Carrera, “A study on arc-length-type methods and their operation failures illustrated by a simple model,” vol. 50, no. 2, pp. 217-229, 1994. https://doi.org/10.1016/0045-7949(94)90297-6
[7] R. J. Allemang, R. W. Rost and D. L. Brown, “Dual input estimation of frequency response functions for automotive structures,” 1982. https://doi.org/10.4271/820193
[8] F. Franzoni, R. Degenhardt, J. Albus and M. A. Arbelo, “Vibration correlation technique for predicting the buckling load of imperfection-sensitive isotropic cylindrical shells: An analytical and numerical verification,” vol. 140, pp. 236-247, 2019. https://doi.org/10.1016/j.tws.2019.03.041
[9] K. A. Seffen and S. Pellegrino, “Deployment dynamics of tape springs,” vol. 455, no. 1983, pp. 1003-1048, 1999. https://doi.org/10.1098/rspa.1999.0347