An Effective Methodology for Strength Prediction of Fusion-Welded Thermoplastic Composite Repairs
A. Viste, B. Castanié, L. Crouzeix, D. Espinassou, C. Briançon
Abstract. Fracture mechanics-based approaches are often used to predict the strength of repairs to composite structures. While these approaches offer high accuracy and provide insight into fracture mechanisms before ultimate failure, they require significant computational resources, even for small structures. This makes them impractical for predicting the strength of industrial applications. This study therefore proposes a simplified model that accurately calculates stresses and strains on each component of a thermoplastic composite repair. Cohesive and shell elements are used with a specific formulation. The model is then compared to a reference model for a simple loading case and geometry similar to that of a composite repair. The results show that the simplified model can accurately calculate stresses and strains while significantly reducing computation time.
Keywords
Repair, Welded Joints, Thermoplastic Composite
Published online 11/8/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: A. Viste, B. Castanié, L. Crouzeix, D. Espinassou, C. Briançon, An Effective Methodology for Strength Prediction of Fusion-Welded Thermoplastic Composite Repairs, Materials Research Proceedings, Vol. 73, pp 183-189, 2026
DOI: https://doi.org/10.21741/9781644904459-36
The article was published as article 36 of the book Mechanics of Advanced Materials and Structures
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] B. Castanie et al., « Review of monolithic composite laminate and stiffened structures in aeronautic applications », Compos. Part C Open Access, vol. 17, p. 100585, juill. 2025. https://doi.org/10.1016/j.jcomc.2025.100585.
[2] J. P. Reis, M. de Moura, et S. Samborski, « Thermoplastic Composites and Their Promising Applications in Joining and Repair Composites Structures: A Review », Materials, vol. 13, no 24, Art. no 24, janv. 2020. https://doi.org/10.3390/ma13245832.
[3] B. H. A. H. Tijs, A. Turon, et C. Bisagni, « Characterization and analysis of conduction welded thermoplastic composite joints considering the influence of manufacturing », Compos. Struct., vol. 348, p. 118505, nov. 2024. https://doi.org/10.1016/j.compstruct.2024.118505.
[4] M. O. W. Richardson et M. J. Wisheart, « Review of low-velocity impact properties of composite materials », Compos. Part Appl. Sci. Manuf., vol. 27, no 12, p. 1123‑1131, 1996. https://doi.org/10.1016/1359-835X(96)00074-7.
[5] A. A. Baker et R. Jones, Éd., Bonded Repair of Aircraft Structures. Dordrecht: Springer Netherlands, 1988. doi: 10.1007/978-94-009-2752-0.
[6] H. Bendemra, P. Compston, et P. J. Crothers, « Optimisation study of tapered scarf and stepped-lap joints in composite repair patches », Compos. Struct., vol. 130, p. 1‑8, oct. 2015. https://doi.org/10.1016/j.compstruct.2015.04.016.
[7] J.-B. Orsatelli, E. Paroissien, F. Lachaud, et S. Schwartz, « Bonded flush repairs for aerospace composite structures: A review on modelling strategies and application to repairs optimization, reliability and durability », Compos. Struct., vol. 304, p. 116338, janv. 2023. https://doi.org/10.1016/j.compstruct.2022.116338.
[8] B. H. A. H. Tijs, M. H. J. Doldersum, A. Turon, J. E. A. Waleson, et C. Bisagni, « Experimental and numerical evaluation of conduction welded thermoplastic composite joints », Compos. Struct., vol. 281, p. 114964, févr. 2022. https://doi.org/10.1016/j.compstruct.2021.114964.
[9] J.-B. Orsatelli, E. Paroissien, F. Lachaud, S. Schwartz, et N. Barrière, « Experimental and numerical multiscale testing of CFRP bonded stepped repairs », Thin-Walled Struct., vol. 208, p. 112764, mars 2025. https://doi.org/10.1016/j.tws.2024.112764.
[10] F. Z. Hu et C. Soutis, « Strength prediction of patch-repaired CFRP laminates loaded in compression », Compos. Sci. Technol., vol. 60, no 7, p. 1103‑1114, mai 2000. https://doi.org/10.1016/S0266-3538(00)00011-7.
[11] D. Taylor, « The theory of critical distances », Eng. Fract. Mech., vol. 75, no 7, p. 1696‑1705, mai 2008. https://doi.org/10.1016/j.engfracmech.2007.04.007.
[12] R. A. Odi et C. M. Friend, « An improved 2D model for bonded composite joints », Int. J. Adhes. Adhes., vol. 24, no 5, p. 389‑405, oct. 2004. https://doi.org/10.1016/j.ijadhadh.2001.06.001.
[13] A. Cerisier, « Prédiction du comportement d’une réparation structurale collée en escalier : application d’une méthodologie par évaluateurs technologiques », phd, Université de Toulouse, Université Toulouse III – Paul Sabatier, 2017. Consulté le: 19 août 2024. [En ligne]. Disponible sur: http://thesesups.ups-tlse.fr/3637/
[14] M. Ridha, V. B. C. Tan, et T. E. Tay, « Traction–separation laws for progressive failure of bonded scarf repair of composite panel », Compos. Struct., vol. 93, no 4, p. 1239‑1245, mars 2011. https://doi.org/10.1016/j.compstruct.2010.10.015.
[15] T. Zaragkas, S. Psarras, G. Sotiriadis, et V. Kostopoulos, « Experimental and Numerical Study of Bearing Damage of a CF-LMPAEK Thermoplastic Composite », J. Compos. Sci., vol. 8, no 1, p. 35, janv. 2024. https://doi.org/10.3390/jcs8010035.
[16] M. Calì, S. Schwartz, F. Lachaud, S. Teixeira de Freitas, et E. Paroissien, « A high-order 2D-plate macro-element model for the analysis of bonded joints », 30 septembre 2025, Social Science Research Network, Rochester, NY: 5547001. doi: 10.2139/ssrn.5547001.
[17] L. F. M. Da Silva, P. J. C. Das Neves, R. D. Adams, A. Wang, et J. K. Spelt, « Analytical models of adhesively bonded joints—Part II: Comparative study », Int. J. Adhes. Adhes., vol. 29, no 3, p. 331‑341, avr. 2009. https://doi.org/10.1016/j.ijadhadh.2008.06.007.

