Development of ZnO Nanoparticle-Based Voltage Sensor using Copper Oxide Nanofluids via Large-Area Printing Technology
K.R.V. Subramanian, Niranjan Murthy, Bharath V.
Abstract. Zinc Oxide (ZnO) nanoparticles are inorganic metal oxides with remarkable Physical, Electronic Optical and Mechanical properties. ZnO nanoparticles also have excellent piezoelectric properties which makes them an appropriate candidate for a voltage sensor. This research explores the novel use of synthesized ZnO nanoparticles as voltage sensor, employing large-area printing technology. This innovative methodology has not been previously attempted, offering a new approach in the field of voltage sensing technology. The concept behind using ZnO nanoparticles as a voltage sensor involves the capillary action of CuO nanofluid flow, which subjects the ZnO nanoparticles to mechanical stress. This stress, due to the piezoelectric effect, results in the generation of voltage from the net charge produced. The co-precipitation method was utilized for the synthesis of ZnO nanoparticles and chemical reduction method was used for synthesis of copper oxide nanofluids. SEM images show the agglomerated architecture of the synthesized ZnO nanoparticles are more likely to have a uniform piezoelectric motion when subjected to external strain. The consistent scaled-up ZnO: Ethylene glycol ratio was utilized for large area printing observing uniform dispersion of 32.2 nm crystal-sized ZnO particles under pressure denoting an excellent packing density and fill factor. The research presents the use of printed ZnO nanoparticles as a voltage sensor with Copper oxide nanofluid flow, which resulted with an observed voltage of 0.9 mV due to unimpeded nanofluid flow and capillary action, and 0.45 mV was observed with pure capillary action of copper oxide nanofluids.
Keywords
ZnO Nanoparticles, Copper Oxide (CuO) Nanofluid, UV-Visible Spectroscopy, Impedance Analysis, SEM, X-Cut Adhesion Test, Large Area Screen Printing, ZnO Voltage Sensor
Published online 11/8/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: K.R.V. Subramanian, Niranjan Murthy, Bharath V., Development of ZnO Nanoparticle-Based Voltage Sensor using Copper Oxide Nanofluids via Large-Area Printing Technology, Materials Research Proceedings, Vol. 73, pp 170-176, 2026
DOI: https://doi.org/10.21741/9781644904459-34
The article was published as article 34 of the book Mechanics of Advanced Materials and Structures
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Z. W. Pan, Z. R. Dai, and Z. L. Wang, Nanobelts of semiconducting oxides, Science, 291, (2001) 1947-1949. https://doi.org/10.1126/science.1058120
[2] D. Wang et al., Piezoelectric polarization induced by dual piezoelectric materials ZnO nanosheets/MoS2 heterostructure for enhancing photoelectrochemical water splitting, Journal of Colloid and Interface Science, 653 (2024) 1166-1176. https://doi.org/10.1016/j.jcis.2023.09.157
[3] R. A. Zargar et al., Synthesis and characterization of screen printed ZnO films for solar cell applications, Optik, 126 (2015) 4171-4174. https://doi.org/10.1016/j.ijleo.2015.08.115
[4] B. Ismail, M. Abaab, and B. Rezig, Structural and electrical properties of ZnO films prepared by screen printing technique, Thin Solid Films, 383 (2001) 92-94. https://doi.org/10.1016/S0040-6090(00)01787-9
[5] V. K. Kapur, B. M. Basol, and E. S. Tseng, Low cost methods for the production of semiconductor films for CuInSe2/CdS solar cells, Solar Cells, 21 (1987) 65-72. https://doi.org/10.1016/0379-6787(87)90105-0
[6] S. Velumani, X. Mathew, and P. J. Sebastian, Structural and optical characterization of hot wall deposited CdSexTe1− x films, Solar Energy Materials and Solar Cells, 76 (2003) 359-368. https://doi.org/10.1016/S0927-0248(02)00288-X
[7] G. Manjunath, S. Pujari, D. R. Patil, and S. Mandal, A scalable screen-printed high performance ZnO-UV and gas sensor: Effect of solution combustion, Materials Science in Semiconductor Processing, 107 (2020) 104828. https://doi.org/10.1016/j.mssp.2019.104828
[8] M. M. Hassan, W. Khan, A. Azam, and A. H. Naqvi, Effect of size reduction on structural and optical properties of ZnO matrix due to successive doping of Fe ions, Journal of Luminescence, 145 (2014) 160-166. https://doi.org/10.1016/j.jlumin.2013.06.024
[9] Q. Qi et al., Properties of humidity sensing ZnO nanorods-base sensor fabricated by screen-printing, Sensors and Actuators B: Chemical, 133 (2008) 638-643. . https://doi.org/10.1016/j.snb.2008.03.035
[10] N. H. Nickel and E. Terukov, Eds., Zinc Oxide-A Material for Micro-and Optoelectronic Applications: Proceedings of the NATO Advanced Research Workshop on Zinc Oxide as a Material for Micro-and Optoelectronic Applications, held in St. Petersburg, Russia, from 23 to 25 June 2004, 194 (2005) Springer Science & Business Media. https://doi.org/10.1007/1-4020-3475-X
[11] A. Dal Corso, M. Posternak, R. Resta, and A. Baldereschi, Ab initio study of piezoelectricity and spontaneous polarization in ZnO, Physical Review B, 50 (1994) 10715. https://doi.org/10.1103/PhysRevB.50.10715
[12] S. Goel, N. Sinha, H. Yadav, and B. Kumar, On the prediction of external shape of ZnO nanocrystals, Physica E: Low-dimensional Systems and Nanostructures, 106 (2019) 291-297. https://doi.org/10.1016/j.physe.2018.08.014
[13] Z. L. Wang, Progress in piezotronics and piezo‐phototronics, Advanced Materials, 24 (2012) 4632-4646.. https://doi.org/10.1002/adma.201104365
[14] K. Rekha, M. Nirmala, M. G. Nair, and A. Anukaliani, Structural, optical, photocatalytic and antibacterial activity of zinc oxide and manganese doped zinc oxide nanoparticles, Physica B: Condensed Matter, 405 (2010) 3180-3185.. https://doi.org/10.1016/j.physb.2010.04.042



