Experimental Determination of Length Scale Parameter: A Comparison of Static and Dynamic Responses

Experimental Determination of Length Scale Parameter: A Comparison of Static and Dynamic Responses

Hareem JAWAID, Mikko SUOMINEN

Abstract. The present study experimentally determines the length scale parameter in a three-point bending foam beam using Modified Couple Stress Theory (MCST). Two approaches are proposed and compared, namely the Static Response Method and the Dynamic Response Method, to accurately capture size effects using the size-dependent Timoshenko beam theory. The effective bending stiffness is obtained experimentally by measuring deflection using the Static Response Method and natural frequency using the Dynamic Response Method. The material length-scale parameter was identified by relating the experimentally determined effective bending stiffness to the corresponding classical theoretical bending stiffness through the MCST formulation for both methods. The results show that both static and dynamic approaches provide consistent length scale parameter values that differ by <3%, indicating that either method can be reliably employed for its determination. The difference can be attributed to small force fluctuations and the neglect of inertial effects in the static response method, unlike the dynamic response method. Both test methods across foams of different stiffness/density indicate strong microstructural influence; the size dependent model predicts reduced deflection and increased natural frequency. Keywords
Static Response, Dynamic Response, Modified Couple Stress Theory, Length Scale Parameter

Published online 11/8/2026, 5 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Hareem JAWAID, Mikko SUOMINEN, Experimental Determination of Length Scale Parameter: A Comparison of Static and Dynamic Responses, Materials Research Proceedings, Vol. 73, pp 13-17, 2026

DOI: https://doi.org/10.21741/9781644904459-3

The article was published as article 3 of the book Mechanics of Advanced Materials and Structures

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] F. Yang, A. Chong, D. Lam and a. P. Tong, “Couple stress based strain gradient theory for elasticity,” International Journal of Solids and Structures, vol. 39, p. 2731-2743, May 2002. https://doi.org/10.1016/S0020-7683(02)00152-X
[2] J. Reddy, “Microstructure-dependent couple stress theories of functionally graded beams,” Journal of the Mechanics and Physics of Solids, vol. 59, p. 2382-2399, November 2011. https://doi.org/10.1016/j.jmps.2011.06.008
[3] C. Liebold and W. H. Müller, “Comparison of gradient elasticity models for the bending of micromaterials.,” Computational Materials Science, vol. 116, p. 52-61, April 2016. https://doi.org/10.1016/j.commatsci.2015.10.031
[4] L. Jian, H. Yuming, G. Song, L. Zhenkun and L. Dabiao, “Size-dependent vibration of nickel cantilever microbeams: Experiment and gradient elasticity,” AIP Advances, vol. 6, Oct 2016. https://doi.org/10.1063/1.4964660
[5] “Gurit PVC STRUCTURAL FOAM CORE,” [Online]. Available: https://kevra.fi/wp-content/uploads/Gurit-PVC-foam-v4.pdf.
[6] S. Oksala, P. Lehto and a. J. Tuhkuri, “A practical method to establish the apparent fracture toughness of ice in the field,” In Proceedings of the 28th International Conference on Port and OceanEngineering under Arctic Conditions (POAC), vol. 48, p. 1157-1165, 2025.