Element-Free Galerkin Method for Cantilever Nano-Beam Based on the Modified Kernel Integral Non-Local Elasticity Model

Element-Free Galerkin Method for Cantilever Nano-Beam Based on the Modified Kernel Integral Non-Local Elasticity Model

S.L. AKHIL, I.R. PRAVEEN KRISHNA

Abstract. Nonlocal elasticity models are widely used to capture small-scale effects in nano-scale structures. The original integral nonlocal model proposed by Eringen often fails to satisfy the essential boundary conditions, and the differential model fails to capture scale effects properly. This limitation was attributed to the ill-posedness of the formulation for certain structural problems and to the inability of the bi-exponential kernel to satisfy the natural boundary conditions. To address these issues, recent studies have proposed kernel modification strategies. The modified kernel is obtained by incorporating the physical boundary conditions into the kernel. The present study uses the mesh-free formulation developed for the integral nonlocal model to assess key deformation characteristics. The mesh-free method presented here can be utilized for the deformation studies of other kernel modification attempts. The results show that the modified kernel with constitutive boundary conditions also failed to capture size effects for the cantilever nanobeam with tip load.

Keywords
Element-Free Galerkin Method, Nonlocal Elasticity, Strain-Driven Model

Published online 11/8/2026, 6 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: S.L. AKHIL, I.R. PRAVEEN KRISHNA, Element-Free Galerkin Method for Cantilever Nano-Beam Based on the Modified Kernel Integral Non-Local Elasticity Model, Materials Research Proceedings, Vol. 73, pp 136-141, 2026

DOI: https://doi.org/10.21741/9781644904459-27

The article was published as article 27 of the book Mechanics of Advanced Materials and Structures

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] K. E, “Elasticity theory of materials with long range cohesive forces,” International Journal of Solids and Structures, vol. 5, no. 5, pp. 731–742, 1967. https://doi.org/10.1016/0020-7683(67)90049-2
[2] A. C. Eringen and D. Edelen, “On nonlocal elasticity,” International journal of engineering science, vol. 10, pp. 233-248, 1972. https://doi.org/10.1016/0020-7225(72)90039-0
[3] A. Nobili and D. Pramanik, “A well-posed theory of linear non-local elasticity,” International Journal of Engineering Science, vol. 215, p. 104314, 2025. https://doi.org/10.1016/j.ijengsci.2025.104314
[4] S. Akhil, I. P. Krishna and M. Aswathy, “Effect of non-dimensional length scale in element free Galerkin method for classical and strain driven nonlocal elasto-static problems,” Computers & Structures, vol. 312, p. 107724, 2025. https://doi.org/10.1016/j.compstruc.2025.107724
[5] S. Akhil, K. I. Praveen and G. K. Khanra, “Element-free Galerkin method for static analysis of nonlocal elastic solids using differential and integral straindriven models,” in Mechanics of Advanced Materials and Structures, N. Naidu, K. R. V. Subramanian and G. N. A. K. Nagaraju Kottam, Eds., CRC Press, 2025, pp. 33–40. https://doi.org/10.1201/9781003770442-5
[6] M. Aswathy and C. Arun, “Stochastic analysis of thin beams and plates incorporating von-Kármán nonlinear strains using meshless method,” Thin-Walled Structures, vol. 196, p. 111478, 2024. https://doi.org/10.1016/j.tws.2023.111478
[7] M. Tuna and M. Kirca, “Bending, buckling and free vibration analysis of Euler-Bernoulli nanobeams using Eringen’s nonlocal integral model via finite element method,” Composite Structures, vol. 179, pp. 269-284, 2017. https://doi.org/10.1016/j.compstruct.2017.07.019