Pull-Out Energy Dissipation and Fracture Toughness of Plasma-Modified Para-Aramid Soft Material
Erman BILISIK, Havva Esra BAKBAK, Mahmut KORKMAZ, Gülhan ERDOGAN, Kadir BILISIK
Abstract. The pull-out behavior, energy dissipation, and fracture toughness of para-aramid fabric structure modified by low-temperature plasma-enhanced chemical vapor deposition (LT-PECVD) were investigated. Results show that pull-out response is governed by a transition from structure-dominated to friction-dominated mechanisms. Fracture toughness decreases with increasing fabric opening length and shows a near-linear correlation with pull-out force. Overall, plasma modification reduces initial structural resistance but improves frictional stability and energy dissipation efficiency, providing a mechanistic basis for optimizing energy-absorbing textile systems.
Keywords
Plasma Treatment, Pull-Out Energy, Fracture Toughness, Para-Aramid Fabric
Published online 11/8/2026, 6 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Erman BILISIK, Havva Esra BAKBAK, Mahmut KORKMAZ, Gülhan ERDOGAN, Kadir BILISIK, Pull-Out Energy Dissipation and Fracture Toughness of Plasma-Modified Para-Aramid Soft Material, Materials Research Proceedings, Vol. 73, pp 130-135, 2026
DOI: https://doi.org/10.21741/9781644904459-26
The article was published as article 26 of the book Mechanics of Advanced Materials and Structures
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] B.A. Cheeseman, T.A. Bogetti, Ballistic impact into fabric and compliant composite laminates, Compos. Struct., vol. 61, no. 1-2, pp. 161-178, 2003. https://doi.org/10.1016/S0263-8223(03)00029-1
[2] K. Bilisik, M. Seyduzzaman, G. Erdogan, M. Korkmaz, Advances in ballistic protection, in: S. Maity, K. Singha, P. Pandit (Eds.), Functional and Technical Textiles, Woodhead Publishing, Elsevier Ltd., Cambridge, MA, pp. 71-123, USA, 2023. ISBN 9780323915939.
[3] M.G. Prakash, K. Balasubramanian, Functionalized aramid fibers and composites for protective applications: A review, Ind. Eng. Chem. Res., vol. 57, no. 49, pp. 16537-16563, 2018. https://doi.org/10.1021/acs.iecr.8b04903
[4] Y. Zhou, M. Ali, X. Guo, D. Yang, An overview of yarn pull-out behavior of woven fabrics, Text. Res. J., vol. 89, no. 2, pp. 223-234, 2019. https://doi.org/10.1177/0040517517741156
[5] M. Bajya, A. Majumdar, S.B. Bhupendra, A review on current status and development possibilities of soft armour panel assembly, J. Mater. Sci., vol. 58, pp. 14997-15020, 2023. https://doi.org/10.1007/s10853-023-08961-y
[6] K. Bilisik, Two dimensional (2D) fabrics and three dimensional (3D) preforms for ballistic and stabbing protection: A review, Text. Res. J., vol. 87, no. 18, pp. 2275-2304, 2017. https://doi.org/10.1177/0040517516669075
[7] J.R. Brown, P.J.C. Chappell, Z. Mathys, Plasma surface modification of advanced organic fibres: Part I – Effects on the mechanical, fracture and ballistic properties of aramid/epoxy composites, J. Mater. Sci., vol. 26, pp. 4172-4178, 1991. https://doi.org/10.1007/BF02402964
[8] F.H. Zhang, R.G. Wang, X.D. He, C. Wang, L.N. Ren, Interfacial shearing strength and reinforcing mechanisms of an epoxy composite reinforced using a carbon nanotube/carbon fiber hybrid, J. Mater. Sci., vol. 44, pp. 3574-3577, 2009. https://doi.org/10.1007/s10853-009-3484-x
[9] S.S. Wicks, R.G. Villoria, B.L. Wardle, Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes, Compos. Sci. Technol., vol. 70, no. 1, pp. 20-28, 2010. https://doi.org/10.1016/j.compscitech.2009.09.001
[10] E. Bilisik, M. Korkmaz, K. Bilisik, Effects of radio frequency (RF) plasma activation on the pull-out, friction, and fracture toughness performance of para-aramid fabrics, Surfaces and Interfaces, Vol. 86, Article no. 108695, 2026, pp. 1-21. https://doi.org/10.1016/j.surfin.2026.108695
[11] ASTM D5528-01, Standard test method for mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites, ASTM International, West Conshohocken, PA, 2002.

