Modeling Hygrothermal-Induced Degradation in Polymer Adhesive Joints for Composite-Metal Assemblies
Touati Benali Abdelaziz, Habib Achache, Mohammed Benyettou, Alberto García-Peñas
Abstract. The durability of adhesively bonded structures under environmental conditions remains a critical challenge in advanced engineering applications. This study examines the effect of hygrothermal aging on the mechanical response of bonded joints through the investigation of aluminum–carbon/epoxy composite assemblies. The configuration is modeled as a single-lap joint with a defined geometry and bonded using the structural adhesive Adekit A140 to ensure consistency in the analysis. Accelerated aging was performed under 100% relative humidity at three temperatures (20 °C, 40 °C, and 60 °C) for exposure durations of 4, 10, and 24 weeks. A three-dimensional finite element model was developed in Abaqus, incorporating degradation of material properties based on experimental data reported in the literature. The numerical results indicate that the equivalent Von Mises stresses are highly localized at the overlap ends, confirming these regions as critical zones for stress concentration and damage initiation. Furthermore, the combined effect of temperature and exposure time has a significant impact on the adhesive layer’s load transfer capability. This study enhances our understanding of the relationship between material properties and hygrothermal conditions, supporting the identification of more durable bonded configurations for long-term structural applications.
Keywords
Adhesive Joints, Hygrothermal Ageing, Stress Distribution, Composite Materials
Published online 11/8/2026, 4 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Touati Benali Abdelaziz, Habib Achache, Mohammed Benyettou, Alberto García-Peñas, Modeling Hygrothermal-Induced Degradation in Polymer Adhesive Joints for Composite-Metal Assemblies, Materials Research Proceedings, Vol. 73, pp 105-108, 2026
DOI: https://doi.org/10.21741/9781644904459-21
The article was published as article 21 of the book Mechanics of Advanced Materials and Structures
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Rushforth MW, Bowen P, Mcalpine E. The effect of surface pretreatment and moisture on the fatigue performance of adhesively-bonded aluminium. J Mater Process Technol 2004;153–154(1):359–65. Compos Struct 2015;125:687–97. https://doi.org/10.1016/j.jmatprotec.2004.04.319
[2] Jiang X, Qiang X, Kolstein MH, et al. Experimental investigation on mechanical behavior of FRP-to-steel adhesively-bonded joint under combined loading – Part 2: after hygrothermal ageing
[3] El Sallah, Z. M., Abdelmadjid, M., Ali, B., Kouider, M., & Rachid, Z. (2024). Influence of hygrothermal aging on the mechanical strength of an Aluminum/Aluminum bonded assembly. Advances in materials research: AMR, 13(6), 527-546.
[4] Chlela, R., Zombré, W., Quiertant, M., Curtil, L., & Benzarti, K. (2019, July). Influence du vieillissement hygrothermique sur le comportement mécanique de composites conventionnels ou biosourcés destinés au renforcement de structures. In 21ème Journées Nationales sur les Composites.
[5] Medjdoub, S. M., Madani, K., Rezgani, L., Mallarino, S., Touzain, S., & Campilho, R. D. S. G. (2022). Numerical analysis of the combined aging and fillet effect of the adhesive on the mechanical behavior of a single lap joint of type Aluminum/Aluminum.
[6] Venkatappagari, S., Mutra, R. R., & Reddy, D. M. (2025). State-of-the-art in adhesive joint technology: A comprehensive review of recent progress. Journal of Materials Research and Technology, 37, 2593-2615. https://doi.org/10.1016/j.jmrt.2025.06.166



