Design and Additive Manufacturing of Adaptive Turbine Blades for CHP with Internal Modular Structures, color print, paperback

$95.00

This book is devoted to the issues of increasing the service life and reliability of the working blades of a thermal power plant steam turbine.

Design and Additive Manufacturing of Adaptive Turbine Blades for CHP with Internal Modular Structures
Tatyana Yurievna RATUSHNAYA, Vitaliy Vladimirovich SAVINKIN, Andrei Victor SANDU, Petrica VIZUREANU, Maxim Lenarovich RAKHMATULIN, Andrey Aleksandrovich IVANISCHEV, Regina Yuryevna DYACHENKO
Materials Research Foundations Vol. 196
Publication Date 2026, 130 pages
Print ISBN 978-1-64490-440-4 (release date Novermber 2026)
ePDF ISBN 978-1-64490-441-1
DOI: https://doi.org/10.21741/9781644904411

This book is devoted to the issues of increasing the service life and reliability of the working blades of a thermal power plant steam turbine by developing and substantiating the optimal configuration of stress-active structural modules inside the blade feather, ensuring the redistribution of thermal force fields and a reduction in the level of maximum equivalent stresses while maintaining the weight and size characteristics.

flyer

Table of contents
Introduction 5
1. Additive Manufacturing: Common Additive Manufacturing Methods,
Their Advantages, Disadvantages, and Applications in Various Industries 1
1.1 Additive Technologies and Their Application in Modern Production 1
1.2 Basic Principles of Manufacturing Metal Products Using Various Additive Manufacturing Technologies 3
1.3 Review of Existing Approaches to the Design of
Stress-Active Structures 6
1.4 Problems and Prospects for Improving Reliability and Efficiency 8
1.5 Formal Formulation of the Problem of Optimizing the Internal Structure of the Blade 10
Conclusion 16
2. Numerical Implementation of the Method for Optimizing the Configuration
of the Internal Structure 17
2.1 Algorithm Development 17
2.2 Vibration Constraints in Parametric Optimization 19
2.3 Construction of the Internal Structure of an Adaptive Turbine Blade For a CHP 22
2.4 Construction of the Internal Structure of a Prototype Turbine Blade for a CHP 29
Conclusion 33
3. Printing Prototypes of CHP’s Adaptive Turbine Blades and Conducting Experimental Studies 35
3.1 Determination of the Printing Material for Experimental Samples 35
3.2 Experimental Studies of Structural Samples for Turbine Blades 36
3.3 Analysis of Experimental Data. Mathematical Model of Damping in Turbine Blade Structures 37
3.4 Results of Experimental Studies 46
Conclusion 53
4. Identification of Rational Methods for Subsequent Mechanical
Processing of Parts 55
4.1 Justification of the Need for Subsequent Mechanical Processing of the Surfaces of Products Obtained by Additive Manufacturing Methods 55
4.2 Determination of Required Surface Quality Parameters to Ensure Functionality 55
4.3 Determination of the Obtained Quality Parameters of Functional Surfaces after Mechanical Processing 58
4.4 Hirtisation Technology as an Innovative Method for Processing Metal Parts Manufactured Using Additive Manufacturing Methods 61
4.5 Development of Standard Recommendations for the Selection of a Technological Process for the Subsequent Processing of Products Manufactured Using Additive Manufacturing Methods 62
Conclusion 64
5. Practical Implementation and Feasibility Substantiation of the
Research Results 65
5.1 Description of the Tesearch Object and Experimental Conditions 65
5.2 Analysis of the Results of Coordinate Measurements and Calculation of Statistical Indices by Sections 66
5.3 Feasibility Study for the Implementation of an Automated Control System 70
Conclusion 73
6. Advanced Equipment with a High-Energy Radiation Source and
Technological Features of Laser Manufacturing of Turbine Blades 75
6.1 Equipment for the Production of an Experimental Sample of an Innovative Blade with Honeycomb Cells Using Laser Technology 75
6.2 Additive Manufacturing Requirements. Regulatory Framework: ISO/ASTM 52900, GOST/ST RK. Manufacturing Process for an Innovative Thermal Power Plant Turbine Blade 78
6.3 Manufacturing of an Experimental Sample of an Innovative Blade with Honeycomb Cells Using Laser Technology 82
6.4 Creation of a Parametric 3D Model of a Turbine Blade with Honeycomb Filling 86
6.5 Develop a Set of Design Documentation for an Experimental Sample of an Adaptive Blade (Tail Section) and Laser Technology 89
6.6 Selection of Metrological Equipment for Quality Control of a Manufactured New Blade for Microcracks and Fatigue Stresses 95
Conclusion 104
Conclusion 106
References 109
About the Authors 121