Protective Coatings for Corrosion Prevention in Industries

$40.00

Protective Coatings for Corrosion Prevention in Industries

Muthukumaran N., Arivazhagan Selvam, S. Sekar, G. Kausalya Sasikumar, Putra kumar Balla

Protective coatings are a primary corrosion-control method in industry because they are scalable, adaptable to diverse exposure conditions, and can be integrated into inspection-driven maintenance plans. Coating reduces corrosion by separating the substrate from the environment (barrier function), preserving a stable interface through adhesion and controlled permeability, and at unavoidable defects slowing under film corrosion growth through system design and timely repair. While coating materials matter, industrial performance is frequently governed by “execution variables” such as surface preparation quality, coating continuity, dry film thickness, curing conditions, and defect management. Standards-based frameworks translate technical requirements into practical specifications. ISO 12944 defines coating system durability as the time until the first major maintenance. This time period is then divided into very low to very high ranges. It makes it clear that durability is a planning requirement, not a warranty. This makes it easier to make decisions about the lifecycle and makes contracts clearer. This chapter talks about a lot of different things, such as industrial functional requirements, coating system architecture and selection criteria, surface preparation and application controls that affect longevity, in-service degradation and failure mechanisms, quality assurance, and condition assessment inspection and testing methods. Protective coatings are thoroughly examined in this chapter. By acknowledging that salt-spray hours are most effective when employed for comparative screening and rarely accurately reflect actual field performance when used independently, this simplifies the interpretation of common accelerated corrosion tests, particularly salt spray. The chapter concludes with maintenance strategies and novel coating concepts (barrier enhancement, sol-gel hybrids, self-healing technologies) as potential pathways for increased durability and lower lifetime costs.

Keywords
Protective Coatings, Barrier Performance, Surface Preparation, Environmental Degradation, Zinc-rich and Functional Coatings, Self-healing Coatings

Published online 10/15/2026, 26 pages

Citation: Muthukumaran N., Arivazhagan Selvam, S. Sekar, G. Kausalya Sasikumar, Putra kumar Balla, Protective Coatings for Corrosion Prevention in Industries, Materials Research Foundations, Vol. 195, pp 81-106, 2026

DOI: https://doi.org/10.21741/9781644904398-5

Part of the book on Corrosion Prevention Engineering for Modern Industries

References
[1] X. Wang, X. Li, and X. Tian, “Influence of temperature and relative humidity on the atmospheric corrosion of zinc in field exposures and laboratory environments by atmospheric corrosion monitor,” Int. J. Electrochem. Sci., vol. 10, no. 10, pp. 8361–8373, 2015. https://doi.org/10.1016/s1452-3981(23)11102-3.
[2] Y. Cai, Y. Xu, Y. Zhao, and X. Ma, “Atmospheric corrosion prediction: A review,” Corros. Rev., vol. 38, no. 4, pp. 299–321, 2020. https://doi.org/10.1515/corrrev-2019-0100.
[3] M. S. Hossain et al., “A case study on metal contamination in water and sediment near a coal thermal power plant on the eastern coast of Bangladesh,” Environ. – MDPI, vol. 8, no. 10, 2021. https://doi.org/10.3390/environments8100108.
[4] R. Singh, “International Bodies that Address Corrosion,” Corros. Control Offshore Struct., pp. 197–208, 2014. https://doi.org/10.1016/b978-0-12-404615-3.00016-4.
[5] S. McCormack, H. Cao, J. P. Martins, P. J. Withers, and P. Xiao, “The effect of porosity, mixed molecular/Knudsen diffusion, and a surface barrier layer on steam corrosion of Yb2Si2O7,” Corros. Sci., vol. 219, no. November 2022, 2023. https://doi.org/10.1016/j.corsci.2023.111238.
[6] L. Guo et al., Progress on high ‑ temperature protective coatings for aero ‑ engines. Springer Nature Singapore, 2023. doi: 10.1007/s44251-023-00005-6.
[7] K. Mondal, L. Nun, C. M. Downey, and I. J. Van Rooyen, “Thermal Barrier Coatings Overview : Design , Manufacturing , and Applications in High-Temperature Industries,” 2021. https://doi.org/10.1021/acs.iecr.1c00788.
[8] C. Wei, G. Wang, M. Cridland, D. L. Olson, and S. Liu, Corrosion protection of ships, Third Edit. Elsevier Inc., 2018. doi: 10.1016/B978-0-323-52472-8.00026-5.
[9] P. Pedeferri (Deceased), “Atmospheric Corrosion,” Eng. Mater., pp. 479–508, 2018. https://doi.org/10.1007/978-3-319-97625-9_22.
[10] C. Kim, L. Chen, H. Wang, and H. Castaneda, “Global and local parameters for characterizing and modeling external corrosion in underground coated steel pipelines: A review of critical factors,” J. Pipeline Sci. Eng., vol. 1, no. 1, pp. 17–35, 2021. https://doi.org/10.1016/j.jpse.2021.01.010.
[11] J. Alcántara, D. de la Fuente, B. Chico, J. Simancas, I. Díaz, and M. Morcillo, “Marine atmospheric corrosion of carbon steel: A review,” Materials (Basel)., vol. 10, no. 4, 2017. https://doi.org/10.3390/ma10040406.
[12] E. Potvin, L. Brossard, and G. Larochelle, “Corrosion protective performances of commercial low-VOC epoxy / urethane coatings on hot-rolled 1010 mild steel,” vol. 31, pp. 363–373, 1997.
[13] F. Deflorian, S. Rossi, and L. Fedrizzi–, “High Performance Coatings,” vol. 72, no. 908, pp. 81–87, 2000.
[14] B. N. Popov, “Evaluation of Corrosion,” Corros. Eng., pp. 1–28, 2015. https://doi.org/10.1016/b978-0-444-62722-3.00001-x.
[15] X. Wang and Z. Lin, “A novel high – performance coating with hybrid nanofiller reinforcement for superior self – cleaning , anti – icing , and corrosion resistance properties,” J. Build. Eng., vol. 80, no. June, p. 107993, 2023. https://doi.org/10.1016/j.jobe.2023.107993.
[16] M. Mohammadi Zerankeshi, R. Alizadeh, E. Gerashi, M. Asadollahi, and T. G. Langdon, “Effects of heat treatment on the corrosion behavior and mechanical properties of biodegradable Mg alloys,” J. Magnes. Alloy., vol. 10, no. 7, pp. 1737–1785, 2022. https://doi.org/10.1016/j.jma.2022.04.010.
[17] X. Hu, R. Barker, A. Neville, and A. Gnanavelu, “Case study on erosion-corrosion degradation of pipework located on an offshore oil and gas facility,” Wear, vol. 271, no. 9–10, pp. 1295–1301, 2011. https://doi.org/10.1016/j.wear.2011.01.036.
[18] S. Varmaziar, H. Mostaan, M. Rafiei, and M. Yeganeh, “Welding and Corrosion Behavior of AISI H13 Welds: The Effect of Filler Metal on the Microstructural Evolutions,” vol. 66, pp. 839–846, 2021. https://doi.org/10.24425/amm.2021.136388.
[19] Y. Fu, J. Li, H. Luo, C. Du, and X. Li, “Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys,” J. Mater. Sci. Technol., vol. 80, pp. 217–233, 2021. https://doi.org/10.1016/j.jmst.2020.11.044.
[20] H. Yan, L. Zhang, H. Li, X. Fan, and M. Zhu, “Towards high-performance additive of Ti3C2/graphene hybrid with a novel wrapping structure in epoxy coating,” Carbon N. Y., 2019. https://doi.org/10.1016/j.carbon.2019.10.034.
[21] C. C. Lin and C. X. Wang, “Correlation between accelerated corrosion tests and atmospheric corrosion tests on steel,” J. Appl. Electrochem., vol. 35, no. 9, pp. 837–843, 2005. https://doi.org/10.1007/s10800-005-1322-7.
[22] D. De Fuente, E. Otero, B. Chico, and M. Morcillo, “Painting over soluble salts : Field extraction of soluble salts from corrosion products of steel,” vol. 54, pp. 240–247, 2005. https://doi.org/10.1016/j.porgcoat.2005.06.012.
[23] J. Bahru and J. D. Takzim, “APPLICATION OF ULTRAVIOLET RADIATION TO CONTROL MICROBIOLOGICALLY INFLUENCED CORROSION : A CASE STUDY ON SOIL SAMPLE FROM MANGROVE,” vol. 11, no. 12, pp. 1695–1704, 2016.
[24] A. M. Fadl, S. A. Sadeek, L. Magdy, and M. I. Abdou, “Robust corrosion guard , mechanical and UV aging properties of metal complex / epoxy hybrid composite coating for C ‑ steel applications,” Sci. Rep., pp. 1–26, 2022. https://doi.org/10.1038/s41598-022-16348-3.
[25] Y. Liu, M. Liu, X. Lu, and Z. Wang, “Effect of temperature and ultraviolet radiation on corrosion behavior of carbon steel in high humidity tropical marine atmosphere,” Mater. Chem. Phys., vol. 277, p. 124962, 2022. https://doi.org/10.1016/j.matchemphys.2021.124962.
[26] R. A. Potyrailo, B. J. Chisholm, D. R. Olson, M. J. Brennan, and C. A. Molaison, “Development of Combinatorial Chemistry Methods for Coatings : High-Throughput Screening of Abrasion Resistance of Coatings Libraries,” vol. 74, no. 19, pp. 5105–5111, 2002.
[27] M. Amer, Q. Hayat, V. Janik, N. Jennett, J. Nottingham, and M. Bai, “A Review on In Situ Mechanical Testing of Coatings,” pp. 1–34, 2022.
[28] E. Akbarinezhad, M. Bahremandi, H. R. Faridi, and F. Rezaei, “Another approach for ranking and evaluating organic paint coatings via electrochemical impedance spectroscopy,” Corros. Sci., vol. 51, no. 2, pp. 356–363, 2009. https://doi.org/10.1016/j.corsci.2008.10.029.
[29] M. I. Abdul-rashid, “Green corrosion inhibitor for oilfield application I: Electrochemical assessment of 2-(2-pyridyl) benzimidazole for API X60 Steel under sweet environment in NACE brine ID196,” Corros. Sci., 2019. https://doi.org/10.1016/j.corsci.2019.02.010.
[30] C. F. Smith and F. E. Dollarhide, “Acid Corrosion Inhibitors – What We Need ?,” pp. 737–746, 1978.
[31] B. N. Popov, Solutions Guide – Chapter 11: High-Temperature Corrosion. 2015. doi: 10.1016/B978-0-444-62722-3.00011-2.
[32] A. Khan, F. Ubaid, E. M. Fayyad, Z. Ahmad, and R. A. Shakoor, “& C corrosion Synthesis and properties of polyelectrolyte multilayered microcapsules reinforced smart coatings,” J. Mater. Sci., vol. 54, no. 18, pp. 12079–12094, 2019. https://doi.org/10.1007/s10853-019-03761-9.
[33] F. Askari, E. Ghasemi, B. Ramezanzadeh, and M. Mahdavian, “Dyes and Pigments Synthesis and characterization of the fourth generation of zinc phosphate pigment in the presence of benzotriazole,” Dye. Pigment., vol. 124, pp. 18–26, 2016. https://doi.org/10.1016/j.dyepig.2015.08.020.
[34] M. Khadem, O. V Penkov, H. Yang, and D. Kim, “Tribology of multilayer coatings for wear reduction : A review,” vol. 5, no. 3, pp. 248–262, 2017.
[35] C. Subramanian and K. N. Strafford, “Review of multicomponent applications and multilayer coatings for tribological,” vol. 165, pp. 85–95, 1993.
[36] E. Schindelholz, B. E. Risteen, and R. G. Kelly, “Effect of Relative Humidity on Corrosion of Steel under Sea Salt Aerosol Proxies,” J. Electrochem. Soc., vol. 161, no. 10, pp. C450–C459, 2014. https://doi.org/10.1149/2.0221410jes.
[37] B. Cwalina, Biodeterioration of concrete, brick and other mineral-based building materials. Woodhead Publishing Limited, 2014. doi: 10.1533/9781782421252.3.281.
[38] H. Wang and R. Akid, “A room temperature cured sol – gel anticorrosion pre-treatment for Al 2024-T3 alloys,” vol. 49, no. 2007, pp. 4491–4503, 2024. https://doi.org/10.1016/j.corsci.2007.04.015.
[39] J. H. Osborne et al., “Testing and evaluation of nonchromated coating systems for aerospace applications,” vol. 41, pp. 217–225, 2001.
[40] S. Daradmare, S. Raj, A. R. Bhattacharyya, and S. Parida, “Factors a ff ecting barrier performance of composite anti-corrosion coatings prepared by using electrochemically exfoliated few-layer graphene as fi ller,” Compos. Part B, vol. 155, no. August, pp. 1–10, 2018. https://doi.org/10.1016/j.compositesb.2018.08.023.
[41] K. Rajitha, K. Narasimha, and S. Mohana, “Diamond & Related Materials Synthesis of graphene oxide-based nano fi llers and their in fl uence on the anticorrosion performance of epoxy coating in saline medium,” Diam. Relat. Mater., vol. 108, no. June, p. 107974, 2020. https://doi.org/10.1016/j.diamond.2020.107974.
[42] D. Grigoriev, E. Shchukina, and D. G. Shchukin, “Nanocontainers for Self-Healing Coatings,” 2016. https://doi.org/10.1002/admi.201600318.
[43] M. Odarczenko et al., “Self-Protecting Epoxy Coatings with Anticorrosion Microcapsules,” ACS Omega, vol. 3, pp. 14157–14164, 2018. https://doi.org/10.1021/acsomega.8b01950.
[44] H. Yu, Y. Zhang, M. Wang, and C. Li, “Interface Components : Nanoparticles , Colloids , Emulsions , Surfactants , Proteins , Polymers Dispersion of Poly ( urea-formaldehyde ) -based Microcapsules for Self-healing and Anti-corrosion Applications a Institute,” 2019. https://doi.org/10.1021/acs.langmuir.9b00526.
[45] R. P. Edavan and R. Kopinski, “Corrosion resistance of painted zinc alloy coated steels,” Corros. Sci., vol. 51, no. 10, pp. 2429–2442, 2009. https://doi.org/10.1016/j.corsci.2009.06.028.
[46] A. M. Fadl, “Robust the corrosion-blocking behavior , mechanical and UV aging resistance properties of epoxy composite coating encapsulated with mixed metal complexes for steel surface applications,” no. Ii, 2022.
[47] M. Schütze, M. Malessa, V. Rohr, and T. Weber, “Development of coatings for protection in specific high temperature environments,” vol. 201, pp. 3872–3879, 2006. https://doi.org/10.1016/j.surfcoat.2006.07.262.
[48] A. Semenescu, V. Pas, O. R. Chivu, and D. Florin, “The Impact of ZnO Nanofillers on the Mechanical and Anti-Corrosion Performances of Epoxy Composites,” 2024.
[49] L. Komorowski and E. Langer, “Bridges and of Same Coatings in Laboratory,” 2022.
[50] P. C. M. Tiano and I. V Aoki, “Corrosion protection of steel structures in industrial and marine atmospheres by waterborne acrylics DTM ( direct to metal ) paint system,” 1953.
[51] D. Santos, C. Brites, M. R. Costa, and M. T. Santos, “Performance of paint systems with polyurethane topcoats , proposed for atmospheres with very high corrosivity category,” vol. 54, pp. 344–352, 2005. https://doi.org/10.1016/j.porgcoat.2005.07.010.
[52] S. M. Kabeb, A. Hassan, Z. Mohamad, and Z. Sharer, “Exploring the Effects of Nanofillers of Epoxy Nanocomposite Coating for Sustainable Corrosion Protection,” vol. 7, no. September 2018, pp. 121–126, 2019. https://doi.org/10.3303/CET1972021.
[53] S. S. Jamali and D. J. Mills, “Studying inhomogeneity of organic coatings using wire beam multielectrode and physicomechanical testing,” vol. 48, no. 7, pp. 489–496, 2013. https://doi.org/10.1179/1743278213Y.0000000114.
[54] M. Pathirana, M. Laleh, A. Somers, B. Hinton, and M. Y. Tan, “The critical effect of rust layers on localised corrosion of steel exposed to waterline environments,” Corros. Sci., vol. 221, no. June, p. 111333, 2023. https://doi.org/10.1016/j.corsci.2023.111333.
[55] Z. Ahmad, “Types of Corrosion,” Princ. Corros. Eng. Corros. Control, pp. 120–270, 2006. https://doi.org/10.1016/b978-075065924-6/50005-2.
[56] A. B. Ramezanzadeh, E. Ghasemi, F. Askari, and M. Mahdavian, “AC SC,” Dye. Pigment., 2015. https://doi.org/10.1016/j.dyepig.2015.07.013.
[57] I. J. Navarro, J. V Martí, and V. Yepes, “Reliability-based maintenance optimization of corrosion preventive designs under a life cycle perspective,” Environ. Impact Assess. Rev., vol. 74, no. September 2018, pp. 23–34, 2019. https://doi.org/10.1016/j.eiar.2018.10.001.
[58] S. Sajedi and Q. Huang, “Reliability-based life-cycle-cost comparison of di ff erent corrosion management strategies,” Eng. Struct., vol. 186, no. February, pp. 52–63, 2019. https://doi.org/10.1016/j.engstruct.2019.02.018.